Membrane filters

Made entirely of PTFE (polytetrafluorethylene), reinforced by Polypropylene net.

• Permanently hydrophobic
• Allowing passage of air even at low differential pressure
• Resistant to almost all chemicals, very strong acids, cryoliquids, alkalis, aggressive organic solvents
• Must be pre-wetted with an organic solvent, such as ethanol, methanol or isopropanol, before filtration of aqueous samples
• Max. Temperature 145 °C

Circular filter for ultrafiltration for sample concentration in stirring cells. The PES diaphragm offers a high flow rate.

Recommended for clarification and sterilisation of aqueous solutions, microbiological analysis and particle counts

• Qualified for aqueous solutions (pH 4-8), hydrocarbons and some dilute solvents
• High non-specific adsorption: 160 µg/cm² for gamma-Globulin
• Maximum temperature 130 °C

MF-Millipore™ Membranes have a biologically inert mixture of cellulose acetate and cellulose nitrate. The MF-Millipore™ filters without Triton® surfactant have a lower water extractable content compared to the standard MF-Millipore™ filters and contain a minimal amount of wetting agent.

Features & Benefits:

• Manifold filter for biological and environmental monitoring applications
• available in various pore sizes
• white or black coloured
• Freely selectable whether with or without grid surface
• Compatible with ethylene oxide, gamma irradiation and autoclave sterilization methods

MF-Millipore™ Membranes have a biologically inert mixture of cellulose acetate and cellulose nitrate. The MF-Millipore™ filters without Triton® surfactant have a lower water extractable content compared to the standard MF-Millipore™ filters and contain a minimal amount of wetting agent.

Features & Benefits:

• Manifold filter for biological and environmental monitoring applications
• available in various pore sizes
• white or black coloured
• Freely selectable whether with or without grid surface
• Compatible with ethylene oxide, gamma irradiation and autoclave sterilization methods

White. They are recommended for the filtration of aqueous solutions and proteins. Due to their low content of extractable substances, they are suitable for sample preparation in environmental analysis.

• High flow rates
• Low non-specific protein adsorption
• High resistance

White, individually sterile packed. Resistant to steam sterilisation up to 134 °C, or in dry heat up to 180 °C. Very low adsorption (important when filtering proteinaceous solutions). Suitable for particle removal and ultracleaning of aqueous solutions, methanol, ethanol, high-grade alcohols and residue analysis of fuels and oils. The extractable content of these filters make up < 1 % of their weight. Other pore sizes and formats available on request.

White, individually sterile packed. Very low content of extractable materials. Weight constant after 60 minutes of drying at 105 °C. Suitable for residue analysis, microscopic viewing in incident or transmitted light, chemotaxis, x-ray fluorescence, spectrometry and gravimetric analysis. Autoclavable at 121 °C. Other pore sizes and formats are available on request.

Cellulose nitrate (cellulose ester) membrane filters, white with black grid, 3 or 6 mm hydrophobic edge, for colony count and sterility testing, individually, sterile packaged / non-sterile.

Cellulose acetate membrane filters, white with black grid, 3 mm hydrophobic edge, for colony count and sterility testing, individually, sterile packaged.