Bags, Foils

• Non-slip
• Withstands temperatures up to 260 °C
• Available in black or red

Interleaved with tissue paper. Foil thickness 0.03 mm.

The lab mats are an economical solution to help keep benchtops clean and safe from stains, spills and wear. Stain resistant washable surface, which can easily be cleaned using any standard disinfectant and is even autoclavable at 121 °C for 15 minutes. The mat can also be rolled up for compact storage. This lab mats can be used with instruments such as centrifuges, vortex mixers, stirrers, and so much more. It offers a large working surface. Food-safe.

• Anti-skid, which helps to keep items with harsh chemicals and delicate glassware in place
• Noise dampening, reducing sound from the vibration of common benchtop equipment.
• Area with internal metal inserts to store magnet bars from magnetic stirrers
• Lip design around the outer edge, that helps contain spillage that may occur when in use
• Protects countertops from hot items up to 200 °C

Suitable for many laboratory instruments. The disposable bags are used for simple and effective wrapping of sterilization goods that are visible through the transparent PET / CPP film. With the self-sealing strip they can be closed safely and quickly.

• Intended for steam and EO gas sterilization
• With two colour indicators
• Robust, durable material
• Wide, self-sealing strip
• Thumb notch for easy opening
• ISO 17665-06 and ISO 11135 conform

• Easy to use and better adhesion
• Our best freshness protection
• Slight initial determination
• Very easy to roll
• Particularly strong
• With time beginning Finder
• Tear-off cap box with stable
• Role of fixation for easy rolling

An ideal Sealing Tape for Petri Dishes, Microplates, Lids, Caps and other Lab Items.
Tape stretches, conforms and seals the irregular perimeter of microtiter plates and petri dishes. Tape and adhesive resist most solvents and caustic agents. Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100°C.
Waterproof.

The SteriBag Premium sample bags uniquely combine a high degree of security, sterility, tamper evident closure and traceability, they are used to securely transport and for the storage of samples. After sampling, the sample can be filled directly into the sterile sample bag. The tamper-evident closure seals the bag liquid-tight and secure. When trying to open the closure again, the word "STOP" appears clearly visible. Both the sample bag and the tear-off field are labeled with a unique tracking number, this allows complete documentation and traceability.

SteriBag Premium is suitable for many demanding applications in the food, pharmaceutical, medical area as well as in cleanroom or biotechnology sectors.

• Sterilised by gamma rays (10^-6)
• With integrated tamper-proof closure for manipulation evidence
• Unique identification via tracking number
• Food-safe

Paper with PE backing. Absorbs 750ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Use as a tray, drawer or shelf liner or to wipe up spills.

The absorbent paper is coated with polyethylene on one side. Liquids are effectively absorbed and can be disposed with the paper, the surface under the paper stays clean.

Embossed pure aluminium foils, extremely tare resistent.

• Handy for everyday use
• Heat-resistant up to 600°C
• Air-tight and a barrier to light
• Dimensions (sheet): 230 mm x 270 mm
• 200 sheets in a box

Adhesive sealers are an interesting alternative to heat sealing systems or CapMats. They are easy to use and there is a lower risk of cross-contamination because they are used as disposable products.

Properties:

• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Highly transparent film with minimal autofluorescence
• Ideal for Real Time PCR
• Self-adhesive
• Consists of a 500 µm thick polypropylene film coated with a highly transparent acrylate adhesive
• The strongly adhering acrylate adhesive provides a reliable sealing of the microplate, thereby minimising evaporation but without influencing the PCR reactions or the flourescence measurements
• With external dimensions of 141.3 mm x 79.3 mm, it covers PCR microplates with a skirt and all other microplates with a standard microplate footprint
• Protruding extra film can be removed without problem with a double perforation

• Stand-up bag with bottom gusset
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Very good barrier properties against water vapor and oxygen
• Opaque
• Protection against the influence of UV radiation
• Temperature range: -40 °C ... 90 °C

The set includes bench top holder and 100 red bench top biohazard bags (HDPE). For collecting pipette tips and microcentrifuge tubes.

• Rectangular steel wire frame for polyethylene bags (22 x 28 cm, 0,018 mm thickness)
• Coated in easy to clean, orange color epoxy
• Snug fitting polypropylene plastic cover
• Autoclavable

LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.

Adhesive sealers are an interesting alternative to heat sealing systems or CapMats. They are easy to use and there is a lower risk of cross-contamination because they are used as disposable products.

Properties:

• Gas-permeable, piercable membrane coated with acrylate adhesive
• Ideal for cultivating bacteria, yeast or cells in microplates
• Consists of heat-sealed rayon fibres
• The pore size varies between 10 µm and 50 µm
• The pores are layered in such a way that the membrane acts as a filter, reliably ensuring that the contents of the wells are protected against airbone bacteria, while maintaining optimal oxygen supply

The handy Cutter is convenient for clean storage and cutting of sealing film such as BRAND Seal-R-film^™. Suitable for 50 mm and 100 mm wide rolls.

For impulse heat sealing tongs 9.106 837 and 9.106 838.

Double impulse heating. LED readout allows a visual check on the sealing progress. Pressure switch triggers the welding process. A special pressure switch for generating the heat impulse guarantees constant welding results. Includes 3m connection cable.

Paper with PE backers. Absorbs 1050ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Sized for benchtop, floor, and fume hood. Use as a tray, drawer or shelf liner or to wipe up spills. Includes durable cloth-like top layer that won"t fall apart when wet, can be used as a floor soaker.

These bags are specially designed for sampling chlorinated water for example for Legionella testing. Each sterile bag contains a nontoxic, nonnutritive tablet containing active sodium thiosulfate to neutralise chlorine at the time of collection. The bag is EPA approved and has the additional benefits of saving time, utility costs, storage space, disposal costs, and replacing sample containers. With Write-On strip for clean and easy identification. Temperature range: -210 to 82 °C.

Adhesive sealers are an interesting alternative to heat sealing systems or CapMats. They are easy to use and there is a lower risk of cross-contamination because they are used as disposable products.

Properties:

• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Coated with an acrylate adhesive
• Pierceable
• Temperature-resistant from -80°C to +110°C
• Ideal for PCR applications
• Ideal for the storage of sample material and active agents
• Remains flat, when removed from its paper backing, and can thus be easily applied to all microplate types
• A double perforation makes it possible to tear off the projecting adhesive sealer and thus improves the stacking of sealed microplates

Whirl-Pak^® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.

• Flat bag with open bottom, sealable
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Opaque
• 2 bags of 50 pieces

Transparent and resealable packaging bag with a film thickness of 50 µm.

• Food-safe
• Freeze-resistant
• Heat-resistant up to 60 °C
• Tearproof
• With white doublestring