Turbidity

Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.

Graduations, ml:	Subdivisions ml:
0 to 2	0.1
2 to 10	0.5
10 to 40	1.0
40 to 100	2.0
100 to 1000	50.0

Accessories Stands for Imhoff cones, PMMA

Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU.

• Automatic overall range adjustment with standard set T-Cal
• High accuracy
• Suitable for laboratory and mobile use
• Memory storage of up to 1000 data-sets
• Real-time clock
• Waterproof sample chamber and housing

Scope of supply: Turbidimeter TB 300 IR in carrying case, 1 set of turbidity standards T-Cal, 7 rechargeble batteries (AA), 1 lithium battery, main charger 100-240V, PC connection cable, 4 vials (diam. 24 mm) with lids, instruction manual

Specifications
Light source:	IR-LED (860nm)
Keypad:	acid and solvent resistant, membrane switch keypad
Auto - Off:	automatic switch off approx. 20 min after last key press
Display:	Graphic-display
Update:	Software update via internet
Memory:	1000 data sets with date, time and registration no.
Measuring range:	0.01 to 1100NTU (Auto range)
Resolution:	0.01NTU (0.01 to 9.99NTU) 0.1NTU (10 to 99.9NTU) 1NTU (100 to 1000NTU)
Accuracy:	± 2% of measured value or 0.01 (0 to 500NTU)/± 5% of measured value (500 to 1100NTU)
Ambient conditions:	0 to 40°C at 30 to 90% R.H. (non condensing)
Interface:	RS232
Power supply:	7 NiMH rechargeable batteries (AA/Mignon), wall plug mains adapter and Lithium battery for data storage and real time clock

Acrylic/PP.
For two Imhoff sedimentation cones made of glass or plastic; with and without stopcock. Compact and easy to transport even when full.

Accessories Sedimentation cones, borosilicate glass 3.3 Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holders, PVC

Imhoff pattern, solid grey PVC. Stable design.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder

Battery-operated portable turbidity meter with infrared LED for nephelometric measurements as per ISO 7027/DIN EN 27027 (EN ISO 7027) or as a white light model with tungsten lamp as per US EPA. It is handy, light and simple to operate and is suitable, primarily for applications to monitor > 1 NTU. With smaller samples of 15 ml, it is also very suited for applications in fermenters and cell cultures at good precision.

Scope of delivery: Turbidity meter in a handy small case with quick instructions, calibration standards 0.02-10.0-1000 NTU, empty cuvettes and batteries.

Specifications
Measuring range:	NTU 0 to 1100 FNU 0 to 1100
Resolution:	0.01 NTU in the range 1 to 9.99 0.1 NTU in the range 10.0 to 99.9 1 NTU in the range 100 to 1000
Accuracy:	0 to 500 NTU/FNU: ± 0.1 NTU/FNU or ± 2 % of measured value
	500 to 1100 NTU/FNU: ± 3 % of measured value
Reproducibility:	0.05 NTU or ± 1% of measured value
Cell size:	25 x 45 mm, 15 ml sample volume
Power supply:	4 x AAA batteries for approx. 1500 measurements

The turbidity meters Turb^® 430 IR acc. to DIN ISO 27027 and Turb^® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.
The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear^® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.

Scope of delivery:
Turb^® 430 IR / Turb^® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTU
Turb^® 430 IR/SET / Turb^® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories

Specifications
Measuring range:	NTU 0 to 1100 FNU 0 to 1100
Resolution:	0.01 in the range 0.00 to 9.99 0.1 in the range 10 to 99.90 1 in the range 100 to 1100
Accuracy:	± 0.01 NTU or ± 2 % of measured value
Reproducibility:	0.01 NTU or < 0.5% vof measured value
Cell size:	28 x 60 mm, 20 ml sample volume
Power supply:	4 x AA batteries for approx. 3000 measurements

Accessories Accessories for turbidity meters Turb® 430

Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.

Two ranges available:

• Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)
• Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)

Calibration kit includes 4 x 60 ml standard solutions (0.02, 20.0, 100, 800 NTU).

Each set contains one sealed cuvette with the indicated concentrations.