Magnetic stirrers without heating, with motor

Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.

• Maintenance-free 2mag motor drive
• Fully sealed housing
• Extremely robust construction and design
• Easy to clean and maximum resistance
• 3 years warranty
• Made in Germany

Please always order control units separately.
Pressure, steam, vacuum and temperature-resistant magnetic stirrer for operation in steam sterilisers.

• Encapsulated, pressure and vacuum tight housing, temperature resistant up to +150 ° C
• easyMOUNT plug coupling for quick installation of the stirrer cable through a pressure and steam tight grommet
• High power transmission over longer distances or for thick vessel bottoms
• mixWATCH stirring rod monitoring in connection with steriMIXcontrol

Specifications
Stirring quantity (H2O):	1 ... 40 l
Operating conditions:	-10 ... +150 °C at 100 % r. H.
Housing:	PPSU, hermetically sealed
Dimensions (W x D x H):	140 x 140 x 32 mm
Weight:	approx. 1.3 kg
IP code:	IP 68

Accessories Control unit steriMIXcontrol for Magnetic stirrer steriMIXdrive

The powerful control units are characterized by:

• Fully encapsulated and sealed stainless steel housing, water, dust and germ-proof
• SoftStart for reliable catching / centering and safe acceleration of the stirring rod with different volumes and viscosities
• Jerk-free stirring even at low speeds
• QuickSet for quick setting of start- and maximum speed
• QuickStop-function against after-run and glass breakage, storage of last working status when turning off
• Digital display for speed setting
• Extremely robust construction and performance
• Easy to clean and maximum resistance
• 3 years warranty
• Made in Germany

-mixWATCH stirring bar monitoring (without stirring speed reduction)

• SoftStart-function (4-steps)
• Adjustable interval setting

Specifications
Permissible ambient temperature:	0 ... 40 °C (at 80 % r. H.)
Power supply:	100 ... 240 V, 50/60 Hz
Specifications
Speed:	100 ... 1200 rpm
Stirring power:	20 W
Power setting: Interval:	variabel, 20/30/60/120 s variabel, 0 ... 240 s
Dimensions (W x D x H):	200 x 155 x 38 mm
Weight:	approx. 1.3 kg

Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.

• Maintenance-free 2mag motor drive
• Fully sealed housing
• Extremely robust construction and design
• Easy to clean and maximum resistance
• 3 years warranty
• Made in Germany

Please always order control units separately.
Submersible magnetic stirrers for careful, protective and warming-free mixing of cell cultures and culture broths.

• Suitable for propeller and spinning ball culture flasks
• For long-term use, e.g., in CO₂ incubators
• Individual measurements on request

Specifications
Stirring quantity (H2O):	5 ... 5000 ml
Permissible ambient temperature:	-10 up to +50 °C at 100 % H.R. max. +50 °C submerged in water
Housing:	Stainless steel
Protection class:	IP 68

Accessories Control units bioMIXcontrol / bioMIXcontrol S for stirring drives bioMIXdrive Accessories Control unit bioMIXcontrol MS4 for stirring drives bioMIXdrive 1 Accessories Accessories for 2mag magnetic stirring systems

Without heating.

• High power
• Flat stable stainless steel housing
• Non-locking motor
• Adjustable speed
• LED digital speed display
• 0 to 56 minute timer, or continuous operation

Specifications
Motor rating input/output:	80 / 35 W
Max. volume stirred (H2O):	150L
Speed range:	0 to 600rpm
Top plate: Interface:	500 x 500 mm, Stainless steel (AISI 304) RS 232
Dimensions W x D x H:	505 x 585 x 110 mm
Weight:	16 kg
Protection system to DIN EN 60529:	IP21
Supply requirements:	230V 50/60Hz
Tested to DIN EN IEC 61010-1.

Accessories Magnetic stirring bars Ikaflon®, cylindrical, PTFE Alternative Magnetic stirrers, Midi MR 1 digital

Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.

• Maintenance-free 2mag motor drive
• Fully sealed housing
• Extremely robust construction and design
• Easy to clean and maximum resistance
• 3 years warranty
• Made in Germany

Please always order control units separately.
Magnetic stirrer for large quantities of stirring and with a very powerful magnetic coupling for chemical and biotechnical applications.

• High power transmission over longer distances or for thick vessel bottoms
• Optimal for use in ovens up to 100 °C
• Stirring bar monitoring mixWATCH in combination with MIXcontrol XL

Specifications
Stirring quantity (H2O):	1 ... 40 l
Permissible ambient temperature:	5 ... 100 °C at 95 % r. H.
Housing:	stainless steel
Dimesnions (W x D x H):	225 x 225 x 38 mm
Weight:	approx. 3.4 kg
IP code:	IP 66

Accessories Control unit MIXcontrol XL for Magnetic stirrer MIXdrive 1 XL

Ultra-flat, compact, wear-free, powerful magnetic stirring drive for microtiter plates with 6/12/24/96 positions, external control unit, hermetically sealed, fully encapsulated stainless steel housing, IP 68, water-, dust- and germproof, robust construction, easy to clean, maximum resistance, submersible in water- resp. oil baths, up to + 50 °C. For use in CO₂ incubators/ovens, removable centering pins, ideal for integration into robots. Individual dimensions and high temperature version up to +200 °C on request.

Please order control units separately.

Specification
Motor rating output:	10 W
Permissible ambient temperature:	-10 ... 50 °C in air, 50 °C submerged in water
Dimensions (W x D x H):	140 x 102 x 26 mm
Weight:	1.1 kg
IP code:	IP 68
Power supply:	48 VDC

Small, lightweight magnetic stirrers for volumes up to 5 l. Ideal for titration, BOD determination, microbiological and biochemical applications.

• Set-up-plate remains cold even in continuous use
• Stirring speed up to 1100 min-1
• Pale set-up-plate
• Accurate speed control even at low speeds
• Splash-proof housing

Specifications
Volume (H2O):	5 l
Power rating:	0.6 W
Speed (max.): Number of stirring positions: Display:	1100 min-1 1 Analog
Dimensions (W x D x H): Weight:	120 x 136 x 50 mm 0.5 kg
Power supply:	100 ... 240 V, 50/60 Hz
Warranty:	3 years

Flask carriers for Magnetic stirrers with or without handles as indicated.

For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.

Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).

Please order the appropriate inlay for the designated flask size.

Very flat magnetic stirrer with wear-free induction drive for stirring volumes up to 5 l. Maintenance-free, as the device contains no mechanical parts. Ideal for titrations, BOD determination, microbiological and biochemical applications.

• Very good chemical resistance
• Gentle start-up
• Pale set-up plate
• Low weight

Specifications
Volume (H2O):	5 l
Speed (max.): Number of stirring positions:	1100 min-1 1
Display: Power rating:	Analog 5 W
Dimensions (W x D x H):	160 x 230 x 33 mm
Weight:	0.9 kg
Power supply:	100 ... 240 V, 50/60 Hz
Warranty:	3 years