Samplers, Solids

Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.

Suitable for removing bulk materials from sacks or large bags and depositing them directly into sample bottles. Simple to use and clean. Crevice-free to prevent sample residues causing cross-contamination which could affect subsequent sample results.
Complete with cleaning brush and two 250 ml sample bottles.

Lock seal close-it and close-it food & pharma please order separately.

Accessories Control seals for sampling close-it Accessories Wide-necked bottle, LDPE, transparent Accessories LLG-Wide-mouth bottles, with screw cap, LDPE Accessories Accesories for UniSampler Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

Sampler for free flowing, bulk goods up to approx. 1cm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.
Operation: Insert Tubes into a sack to the desired sampling depth, while keeping the collection tube closed using your hand. When you take away your hand, the sample flows directly through the open tube into the container or sampling bag beneath it.

• choice of 2 lengths, 40 cm and 80 cm
• also for coarse-grained bulk goods
• AISI 316 stainless steel
• corresponds to ISTA standard for seed lengths of 10 mm and 5 mm

Lock seal close-it and close-it food & pharma please order separately.

Accessories Control seals for sampling close-it Alternative Sampler Silo Drill, aluminium or stainless steel V2A Alternative StickProof Sampler, stainless steel

For sampling bulk goods of all types. Available in various different lengths and materials:
Multi-sampler: With several closed chambers for multi-point sampling from several predetermined sampling depths. Available in stainless steel V4A/PTFE, stainless steel V4A/V4A or aluminium. Tube diameter: 25mm.
All-layer-sampler: with open inner tubes for cross-sectional sampling through all layers of the sample. Emptied via the open tube end of the sampler. Available in stainless steel V4A or aluminium. Tube diameter: 25mm.
Jumbo-sampler: generally as the All-layer-sampler with open tube end. With a tube diameter of 50 mm, ideal for coarse grains and lager quantities. For multi point sampling the chambers can be seperated by PTFE separators.
Uno-sampler: With a closed chamber, for target samples from a pre-determined sample depth.

Easy emptying with the emptying device.

Lock seal close-it and close-it food & pharma please order separately.

Accessories Emptying device, stainless steel Accessories Zone sampler, accessory cleaning brush, PVC/stainless steel Accessories Control seals for sampling close-it

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

Alternative Disposable liquid samplers, HDPE

White. Due to their long, ergonomic and solid handles and pointed blades they can be easily pierced into paper and plastic bags. The spatulas are ideal for sampling of powder, granules and pastes. The LaboPlast^® Bio / SteriPlast^® Bio products are entirely made of renewable resources. Not only with regard to quality but also with regard to its characteristics for high-quality sampling, it is perfectly comparable with conventional polyethylene.

• Individually packed
• SteriPlast^®Bio additionally gamma-sterilized
• Production, assembling and packaging acc. to Cleanroom class 7 (10000)
• According to EU food and FDA guidelines

Alternative Disposable spatulas LaboPlast®/ SteriPlast®, PS

Emptying zone samplers were often a matter of patience and a steady hand. Now it"s easier and faster with Bürkle"s emptying device. Just lay the zone sampler onto the stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will directly flow into the containers below. Quality materials ensure that the emptying device is autoclavable.

For taking bulk good samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m.

• Food-safe
• Autoclavable

The sampler is suitable for deep-frozen products in the food industry and semi-solid substances. With the robust hollow borer, with sharp sawing crown, a cross-sectional sample of up to 20 cm length can be cut out.

• Stainless steel V4A (1.4404/1.4571)
• Sterilisable
• Food-safe

Scope of supply: Borer, borer head for use in conventional drills and rod for pressing the cylindrical sample out of the borer head

Manually-operated reels

• High winding capacity of up 150 m for cable 2 mm dia.
• Reel width: inner 44 mm, outer 55 mm, reel diameter: inner 100 mm, outer 180 mm
• Please order the required lowering cable separately

Lowering cables

• For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials
• Tensile load max. up to 10 kg