-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Graduated flasks
Volumetric flasks provide precise results in chemistry and pharmacy. They are not scaled, but have a single ring mark that is drawn all the way round the neck to avoid reading errors.
The narrow neck results in high setting accuracy. In addition, volumetric flasks have bulbous curves in the upper area so that any gas bubbles that form can escape from the solution more easily. However, if there are gas bubbles in the solution, the volumetric flask must be swivelled slightly so that the bubbles rise to the top. In addition to volumetric pipettes and burettes, volumetric flasks are therefore the most accurate volumetric instruments in the laboratory for analysis.
Volumetric flasks VITLAB® UV-protect, PMP, Class A with NS stoppers, PP
UV-absorbing, highly transparent.
For storage of light-sensitive substances.
With ring mark individually calibrated to In".
Class A tolerances according to DIN EN ISO 1042.
With printed lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC...
Measuring cylinders, PMP, tall form, class A, blue graduations
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60°C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier"s website....
Volumetric flasks, boro 3.3, class A, PUR coated, blue graduations
The plain and high quality PUR coating envelops the volumetric flasks like a protective skin. In the event of breakage, the safety coating helps contain the glass fragments. The light blue coating facilitates optical distinction. Frequent autoclaving at 121 °C reduces splintering protection. Suitable for dishwashers (cleaning up to max. 95°C). All Blaubrand...
Volumetric flasks, plastic, Class B
Highly transparent PMP. Tolarances Class B acc. to DIN EN ISO 1042. With individually adjusted, red printed graduation and inscriptions and PP standard ground joint stoppers.
The volumetric flasks withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. Recommended cleaning temperature: up to 60°C to preserve printing on the flasks....
Volumetric trapezoidal flasks, borosilicate glass 3.3, class A, blue graduations
All Blaubrand ® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with individual works or DAkkS calibration certificate, please enquire. Blaubrand ® volumetric flasks (except wide-neck flasks). Individual and batch works, USP calibration certificates are also available on request. Models with glass stoppers available on request. The batch certificate is also available to download from the supplier"s website....
Check flasks, DAkkS calibrated, boro 3.3, class A, with 3 marks, blue graduations
BLAUBRAND ®, DIN EN ISO 1042. Calibrated to contain (TC, IN). DAkkS (former DKD) certificate included. The volumetric flask with 3 marks is used to check the functioning of a dispenser. The mark in the middle shows the nominal volume, the upper and lower marks show the error limits as specified in the table below. If the error limit is exceeded even with repeated measurements, the dispenser is defective. The DAkkS-calibrated volumetric flask does not replace the gravimetric test of the monitoring of measuring instruments according to ISO 8655....
Volumetric flasks for determination of oil content, Silberbrand, Borosilicate glass 3.3
DIN 51 368. For determination of oil content in aqueous oil emulsions (e.g. drilling oil). With NS19/26, hollow glass stoppers. Graduations and inscriptions in highly contrasting white enamel. Capacity 100 ml, tolerance ±0.2 ml. Calibrated to contain (IN).
Subdivisions: 0 to 5 ml : 0.1 ml, tolerance: ±0.1 ml....
Volumetric flasks, PFA, class A, with screw cap
Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be exceeded ! Cleaning up to max. 60°C is recommended to preserve graduation marks and inscriptions.
- Tolerances according to class A
- DIN EN ISO 5215
- Incl. one batch certificate
- DE-M marking
- Calibrated to contain (TC, In)
- PFA screw cap with moulded sealing ring
- Autoclavable
Volumetric Flasks, PMP, Class B, with PP Screw Cap
Volumetric flasks made of polymethylpentene. Highly transparent. Calibrated to contain (IN). DIN EN ISO 1042. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC....
Volumetric trapezoidal flasks, DURAN®, class A, blue graduation, with PE stopper
IN (TD) calibrated. With dated batch identification. Declaration of conformity acc. to DIN 12600. NS ground with poly stopper. Ring mark and graduation in high contrasting blue enamel. According to DIN EN ISO 1042.
For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available....
Volumetric trapezoidal flasks, boro 3.3, class A, blue graduations
All Blaubrand
® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with individual works or DAkkS calibration certificate, please enquire.
- DIN EN ISO 1042
- DE-M marking
- Graduations and inscriptions in highly contrasting blue enamel
- Calibrated to contain (IN)
- With PP stoppers
Volumetric flasks, borosilicate glass 3.3, class A, blue graduated, with PE stoppers, coated
The flasks are coated with a special formulated coating that holds the broken parts together in case of breakage. The transparent coating can resist up to 135°C with maximum period of 30 minutes. Coated flasks should not be exposed directly to open flame.
- Conformity certified, with batch certificate
- DIN EN ISO 1042
- Calibrated to contain (IN)