Pipette tips

Disposable Reagent Reservoirs with a V-shaped bottom to ensure that all the reagent is accessible and can be easily aspirated. Thick wall construction and wide base adds stability and durability making the reservoir easy to handle without product deformation.

• Graduation markings allow for measurement of the liquid
• With pour-off spouts on all corners
• Stackable, with nesting system for easy separation
• Sterile versions are sealed in bags, electron beam sterilised and Dnase, Rnase and pyrogen-free
• Quality certificate available on request

Micro pipette tips with a pipetting volume of up to 20 μl are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume. Greiner Bio-One currently offers three types of micro pipette tips (micro tip P10, micro tip P10 graduated, crystal tip). 20 μl Crystal Pipette Tips ideally suited for Eppendorf®. 10 μl Micro Pipette Tips ideally suited for Gilson®.

Properties:

• Manufactured from high-grade polypropylene
• Optimum in performance and fit
• High breaking strength, and dimensionally stable, free of heavy metals
• Heat-resistant up to ca. +140 °C, cold-resistant down to -190 °C
• Autoclavable

Disposable syringes HSW NORM-JECT^®withPP barrel, and PE piston. Luer or Luer-Lock nozzle

• Smooth flow, tight, high transparency barrel
• No rubber, styrene or DEHP, latex- and silicone-oil-free
• Sterile, individually blister strip packed
• Defined position of the plunger at volume "0" to feel when plunger is completely inserted
• According to ISO 7886-1
• Defined safety stop to avoid accidental pull-out of plunger

These tips were specially designed for the Finnpipette multichannels (reverse pipetting is possible with the 300µl). The Finntip 300µl is also suitable for single channel pipets in the 5-300µl range. The packaging options include refill packs.

The 100 μl pipette tip is recommended for Eppendorf® pipettors, it has a bevelled edge, which increases pipetting accuracy. The 200 μl pipette tip was developed for Gilson® pipettors. Its liquid end is bevelled, the contact surface of the pipetted liquids is reduced and the pipetting accuracy increases, since less liquid can remain on the pipette tip.

Properties:

• Manufactured from high-grade polypropylene
• Optimum in performance and fit
• High breaking strength, and dimensionally stable, free of heavy metals
• Heat-resistant up to ca. +140 °C, cold-resistant down to -190 °C
• Autoclavable
• In two different sizes

Like the 200 μl tip, the 1000 μl tip recommended for Eppendorf® pipettors is distinguished particularly by a shorter tip collar. It can be used for volumes between 100 and 1000 μl. It is also suitable for Gilson® pipettors with a volume of 200 - 1000 μl and is only available in blue.

Properties:

• Manufactured from high-grade polypropylene
• Optimum in performance and fit
• high breaking strength, and dimensionally stable, free of heavy metals
• heat-resistant up to ca. +140 °C, cold-resistant down to -190 °C
• Autoclavable
• Available clear

Capillary Pistons are designed, developed, and manufactured to fit Gilson MICROMAN® perfectly. They ensure optimal performance of your MICROMAN® pipette across the full volume range.

All pipettes are supplied with a filter for protection against the suction of liquid into the pipetting device. Lot number and expiry date is on each bag noted. By using a high-grade polystyrene a maximum clarity is guaranteed. Increased volume of pipettes is a negative graduations. Pipette colour code according to international standards. Short-format pipettes (shorties) permit back-saving work.

Properties:

• Non-cytotoxic and free of detectable DNase, RNase and human DNA and endotoxins
• Sterile
• High optical clarity
• Maximum accuracy
• Drop-free pipetting
• Clear, easily legible graduation
• 5/10/25 ml pipettes with vertical Schellbach stripe for easier volume identification

For cell culture, Greiner Bio-One offers standard and filter cap cell culture flasks with growth areas of four different sizes. Suspension culture flasks complete the range in another sizes.They are made of high-grade polystyrene. The special design of our cell culture flasks makes it possible to efficiently reach the cell lawn with a cell scraper, whilst still providing optimal access with a pipette. The special neck
design reduces the risk of wetting the inside of the cap with medium, thus providing additional protection against contamination. The stacking rim on the top of the flasks ensures firm standing and easy stackability in the incubator.

Properties:

• Improved cell adhesion through physical surface treatment
• Cell culture flasks with standard screw cap (without filter)
• Canted neck
• Graduation on both sides
• Sterile and user-friendly packaging
• 25 cm², 75 cm² and 175 cm² growth areas
• High and flat design of the 175 cm² cell culture flask for variability of media volume

For viscous liquids up to 200 mPa* s and high vapour pressure, e.g. ethanol and acetone.

• Colour coded with 1 colour ring
• Continuous volume scale
• Automatic tip recognition in Multipette^® 4780, Multipette^® plus, Multipette^® stream and Xstream