Minicentrifuges

Mini-centrifuge for all applications which do not require high speeds, e.g. micro-filtrations and cell separation. Transparent cover allows constant observation of centrifuge. The mini-centrifuge can be used for both PCR-vessels and PCR-strips. As a safety feature, the centrifuge will run only when the lid is closed. Lid opens easily with the press of a button.

• Fixed speed of 6000rpm
• Digital timer adjustable from 1 to 99min
• Integrated quick stop
• Fast start-up of speed
• Compact design and quiet operation
• Rotor exchangeable without tools
• Easy operation with touch keypad

These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• 48 place centrifuge for 1.5ml / 2.0ml micro test tubes, 6 x 50 ml Falcon^® tubes or 2 x MTP plates
• Automatic rotor identification
• 12 different rotors (available as accessories)
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• LCD display with backlighting
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time

The CVP-2 enables the simultaneous sample preparation of multiple samples at one time. Versatile through being able to hold non-, semi- and fully-skirted PCR plates with no additional accessories required.

• Centrifuge and vortex mixer combined for significant time saving
• Independent vortex and centrifuge timers with up to 999 cycles
• Adjustable rpm or 4 programmable presets
• Consistent preparation of up to 192 samples continuously

The powerful and user-friendly MiniSpin^® and MiniSpin^® plus microcentrifuges are extremely compact and have a small footprint. Depending on your needs, you can choose between two models. MiniSpin^® plus provides the speed required for molecular biology separations.

• Especially quiet due to its carefully balanced drive
• Maintenance-free motor
• Clear digital display
• Minimal sample heating (after 20min. at max. speed only 12°C max. )
• Separate short-spin button
• Automatic lid opening
• Integral power supply unit
• Capacity: 12 x 1.5 / 2ml containers
• Autoclavable rotor (121°C, 20min.)
• Start-up / slow-down time less than 13 secs. (to / from max. speed).

• Includes standard anodised aluminium rotor
• Timer can be set for up to 30 minutes

• Includes "Black Line" aluminium rotor
• Speed/rcf display switch
• Timer can be set for up to 99 minutes
• Permanent centrifuging option

Combined centrifuge/vortex mixer for microtubes and 0.2ml strips. For independent centrifuge and vortex mixing operations, or a programmable sequence of spin and mix phases of multiple tubes.

• Vortex mixing intensity: three stage adjustment (soft, medium and hard)
• Interchangeable rotors for 2.0ml, 1.5ml, 0.5ml, 0.2ml microtube combinations and 0.2ml strips
• Timed vortex mixing: 1sec to 20sec
• Supplied with 2 rotors: 12 x 1.5/2.0ml and 12 x 0.5ml plus 12 x 0.2ml

Compact high-speed benchtop micro centrifuge with a built-in rotor for 12 x 1.5/2ml
microtubes. Ideal for biomedical laboratories.

• Fixed angular aluminium rotor accommodates 12 x 1.5/2 ml microtubes, supplied with 12 adapters for 0.2ml and 0.5ml tubes and fixing lid (rotor autoclavable, lid not autoclavable)
• Timed operation (1 to 30 minutes), with automatic switch-off
• Suitable to use in cold rooms, operating temperature ambient 4°C to 25°C
• Metal protective inserts inside the lid and casing, automatic imbalance switch-off and locking of a lid provide safe operation
• Constant airflow around the rotor reduces risk of samples overheating during centrifugation
• Simple push-buttons and a clear 2-line LCD status display shows actual and set values of time, set and actual speed and relative centrifugal force (g-force)
• Low voltage cord easily fits through refrigerator or workstation door gaskets
• Compact design and quiet in operation
• Fits neatly and unobtrusively into the workspace

The Z 167 M is ideally suited for the routine centrifugation of reaction tubes. Equipped with a powerful drive, it accelerates the 18 x 1.5/2.0 ml rotor in a very short time to approx. 16000 xg. Color visual representation of the operating state such as standstill, sleep mode or centrifugation.

• Microprocessor with large LCD display
• Electromagnetic lid lock
• Active imbalance identification and cut-off
• Air Cooling System
• Permanent indication of pre-set and actual values
• Storage of up to 99 runs
• Noise level < 57 dBA, at max. speed
• Splash-proof foil keyboard with touch function
• Manufactured in accordance to International Safety Regulations, i.e. IEC 61010

The Microliter Centrifuge, Z 207 M was designed specifically for small, compact spaces, suitable in any laboratory setting. Option for two different rotor types: a Fixed-angle rotor for 24 x 1.5/2.0 ml (also hermetically sealed available) and a rotor for Spin Column Kits.Distinct control panel "Touch" function for easy operation, also with gloves. Optimum air cooling of the samples even at maximum speed.

• Maintenance-free induction drive
• Rapid acceleration and deceleration
• Noise level below 60 dBA at 17317 x g
• Microprocessor with large LCD Display
• Active imbalance-identification and cut off
• Audible signal at the end of each run
• Quick access to samples with a snap on lid
• Manufactured according to international safety regulations, i.e. IEC 61010
• Quick-key for short runs
• Storage of up to 99 runs