Dishes

Stainless steel 18/10. Satin finish. With knob lid.

Round , white with broad, stable edge and circumferential standing ring on the bottom. Food-safe product according to regulation (EU) No. 10/2011.

Remanit^® 4301. With edge rim.

To DIN 12907. Glazed inside and outside except for rim.

Disposable Reagent Reservoirs with a V-shaped bottom to ensure that all the reagent is accessible and can be easily aspirated. Thick wall construction and wide base adds stability and durability making the reservoir easy to handle without product deformation.

• Graduation markings allow for measurement of the liquid
• With pour-off spouts on all corners
• Stackable, with nesting system for easy separation
• Sterile versions are sealed in bags, electron beam sterilised and Dnase, Rnase and pyrogen-free
• Quality certificate available on request

• DIN 12336
• Flat-bottom with spout

Cylindrical. With fitted stoppers.

With rounded edges.

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

Ideal for covering PTFE beakers. Excellent chemical resistance.

For multi purpose use. Durable and resist to bending, with strong rounded rim. Stackable for space solving solutions, polished surface for easy cleaning. Resistant to many acids and alkaline solutions. Food-safe.

The highest possible degree of automation, optimal performance and cost savings continue to be the requirements placed on microplates for high-throughput screening. The footprint is compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Well volume is 12.6 μl
• Working volume of 3 - 10 μl
• Curvature of the plates to < 100 μm
• Ideally suited for bottom reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

• Complies to DIN 12337
• Manufactured from Pyrex^® borosilicate glass
• Suitable for use up to 400°C
• Chemically and thermally resistant

Sterile trough-shaped reservoirs with pour-off spouts on all 4 corners. With graduations on inside wall.

18/10 steel. Cylindrical.

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements

With vertical side walls. Glazed, except for base exterior.

With vertical walls and polished rims.
With or without stainless steel lid. Dimensions stated are nominal.

Made of stainless steel for easy removal of paraffin inclusions: they allow a precise location of the specimen into the paraffin.