Measuring cylinders

Tall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.

Tall form, with spout, transparent. DIN 12681 and ISO 6706. Calibrated to contain (TC, In). Exposure to temperatures up to 121 °C (autoclaving) will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60 °C is recommended to preserve marks and inscriptions.

Low form. High clarity. Calibrated to contain (TD, In). Exposure to temperatures up to 80 °C will not cause tolerance limits to be exceeded!

Flawless spout design assures pouring without any drips. Thick and durable polypropylene base reduces the risk of breakage during use and cleaning. Base perfectly fits the cylinder body and can easily be dismantled.

With spout, tall form. Blaubrand^®. To DIN EN ISO 4788.
DE-M marking with works certified batch number. With spout and hexagonal foot. Graduations and inscriptions in highly contrasting blue enamel. Calibrated to contain (IN). All Blaubrand^® cylinders are delivered with batch number and batch certificate. Also available with individual works, USP, or DAkkS (former DKD) calibration certificate on request. The batch certificate is also available to download from the manufacturer"s website.

Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.

Tall form. Highly transparent. DE-M marked. Ring marks at the major graduation points. The conformity certified cylinders are delivered with a batch certificate which includes batch number and the actual determined nominal capacity with indications of the test conditions. Batch number and year of fabrication is printed on each cylinder. The concluding deviations to the nominal capacity are clearly within the required tolerances of class A acc. to DIN 12681 and ISO 6706. Measuring cylinders made of PMP withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. On request also with DAKKS calibration certificate or single certificate.

Acc. to DIN EN ISO 4788. Class B, blue graduated.

Transparent. Lightweight construction. Class B. Fulfil requirements of ISO 6706. Large, round foot with moulded rib for stability. Non-wetting. Calibrated to contain / deliver at 20°C.

With spout, removable plastic socket and protective ring, graduation marks, calibrated for IN, DIN EN ISO 4788.

All Blaubrand^® cylinders are supplied with batch number and one batch certificate per packing unit.

• DIN EN ISO 4788
• DE-M marking
• PP stoppers and hexagonal foot
• Graduations and inscriptions in highly contrasting blue enamel
• Calibrated to contain (IN)

Low form, circular base. Excellent chemical resistance. Moulded graduation. Wide base for high stability. Food-safe, autoclavable.

According to USP error limits.

• With dated batch identification
• Main point ring graduation
• Additional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com

• Calibrated to contain IN
• With spout and hexagonal base
• Short line
• DIN EN ISO 4788

Calibrated to contain (IN). With spout, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer"s website.

• Calibrated to contain IN
• With spout and hexagonal base
• Short line
• DIN EN ISO 4788

Calibrated to contain (IN). With PE stopper, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer"s website.

Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate.

For determination of volumes before and after tamping and tamping density, as well as compaction. Acc. to European Pharmacopoeia, DIN ISO 787 part 11, ISO 3953, ISO 8967 and ASTM B 527-93.

All Blaubrand^® cylinders are delivered with batch number and batch certificate. The batch certificate is also available to download from the manufacturer"s website.

• BLAUBRAND^®
• DIN EN ISO 4788
• DE-M marking
• Graduations and inscriptions in highly contrasting blue enamel
• Calibrated to contain (IN)
• With spout and hexagonal foot

According to DIN EN ISO 4788. DE-M marking. With spout and hexagonal foot. Calibrated to contain (IN).

All Blaubrand^® cylinders are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate, or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the manufacturer"s website.

• BLAUBRAND^® ETERNA
• DIN EN ISO 4788
• DE-M marking
• Graduations and inscriptions in ETERNA amber stain
• Calibrated to contain (IN)
• Ring marks at major graduations
• With spout and hexagonal base

• BLAUBRAND^®
• DIN EN ISO 4788
• DE-M marking
• Ring marks at major graduations
• With spout and hexagonal base
• Calibrated to contain (IN)

With spout.