Pipette controllers

Low cost, manual pipetting aid (no mains connection). Simple, safe and accurate. For all commercially available volumetric and graduated pipettes from 0.1 to 200 ml. Weighing only 130g, it ensures comfortable, ergonomic and problem-free pipetting. Each time the "pump" button is pressed approximately 2 ml of sample fluid is drawn up. When the "out" button is pressed the liquid is gently released via an accurate valve system with the amount of pressure exerted on the Blow-out button determining the speed of release. Blow-out pipettes can be fully emptied by pressing another button on the back of the unit. A standard PTFE membrane filter prevents overfilling.
Supplied with: pipetus^® junior with 2 round PTFE filters, sterile

Accessories Accessories for pipetus®-standard and pipetus®-junior Alternative Pipette controllers, pipetus® standard, standard-filter Alternative Pipette Filler, pipetus®

Process a full rack of Thermo Scientific™ Matrix™ or Thermo Scientific™ Nunc™ tubes in less than one minute with this ergonomic, manual capper/decapper. The Thermo Scientific™ 8-Channel Screw Cap Capper/Decapper is designed to cap tubes to the optimal torque to maintain sample integrity and prevent sample loss during storage. The 8-channel Capper/Decapper is a practical addition to benchtop processing of screw top storage tubes.

• Improves processing throughput of manual procedures with automated column-wise decapping and capping in just four seconds
• Ensures reproducibility by capping all tubes to the optimal torque level specified for the tube
• Allows anyone in the lab to cap or decap tubes with a light weight, easy-to-use and ergonomic design
• Stand allows easy storage of removed caps during sample processing steps
• Virtually always available for use with long battery life and quick recharge time

For disposable pipettes with micro ring mark and many other small glass pipettes up to 1ml. Autoclavable (121 °C). The micropipette controller reduces risk of infection. Contaminated disposable micropipettes can be removed using the integral ejection button.

Accessories  Alternative Pipette controllers, micro-classic

PIPETMAN® L is a mechanical air-cushion pipette with a patented volume locking system that eliminates the need to adjust the volume during pipetting. Due to the innovative ejection system with a lever arm the ejection forces are very low. In addition, the eject button is adjustable, so that it can be comfortably operated by both right- and left-handed users. PIPETMAN® L has a 2D identification code.

• Volume Locking Mechanism
• Particularly light
• Adjustable for left- and right-handed users
• Traceable 2D identification code
• Color coded snaps that match the packaging of the Gilson tips
• Universal shaft that provides a secure hold for most pipette tip brands

Alternative Eight-channel pipettes

• For all pipettes from 0.1 to 200 ml.
• Ergonomic handle, very light weight of ca. 190 g
• Speed can be adjusted easily, continuously and exactly with one hand using 2 buttons
• A 50 ml pipette can be filled in less than 10 seconds
• Liquid release can be done either by gravity delivery when calibrated ""Ex"" (to deliver), or in blow out mode using the battery-operated motor
• Nickel-metal hydride battery allows approx. 8 hours of non-stop pipetting
• Charge level of the rechargeable battery is shown by the LED indicator (changes from green to red two hours before the battery must be recharged)

Scope of supply: Pipette controller incl. battery charger (100-240 V, 50/60 Hz), 4 plug adapters (EU, UK, US/J, AUS), battery, battery compartment cover, two replacement 0.2 µm membrane filters and instruction manual

• Simple, one-button, manual operation
• Robust construction
• Pipette adapter protected by membrane filter, exchangable
• Practically maintenance free
• Ideal for graduated pipettes up to 100 ml

Alternative

Comfortable and reliable. Thanks to its ergonomic design and easy handling, the micro-classic pipette controller provides the comfort needed for difficult work under the microscope. Suitable for disposable micropipettes with ring marks and other microlitre volume pipettes with a capacity up to 1ml. Suitable for left, or right-handed operation. The adapter and suction tube are autoclavable at 121 °C.

Alternative Micropipette controller

Classic pipette controller, tried and tested for over 20 years. Ideal for work in fume cupboards as separate hand and pump modules (230 Volt). Handle is particularly ergonomic and lightweight. Can be used with 0.1 to 200 ml pipettes. Standard delivery (Ex) or Blow-out functions are available. Pipetting speed can be pre-selected on the pump module. Pipetting is carried out by simply pressing the in or out buttons. The amount of pressure exerted determines the ultimate pipetting speed. Built-in safety valve prevents penetration of liquid into the instrument or the handle. The pipetus^®-standard-filter is additionally supplied with an extra large capacity filter mounted on the pump module. pipetus^® standard-filter is supplied with: pipetus^® standard complete with electric pump, 2 filters and 1 safety valve extra.

Accessories Accessories for pipetus®-standard and pipetus®-junior Alternative Pipette controller, pipetus® junior Alternative Pipette Filler, pipetus®

The pipette teats are available in different colours and are suitable for pasteur pipettes with Ø 7 mm.

• With roll-away lock
• Slightly flattened shape with structured, nonskid grip area
• Extra large volume of over 2 ml
• Oval body for better handling

• Easy and fatigue-free operation for both left and right-handed users
• A specially designed inlet cone accommodates pipettes from 0.1 ml to 200 ml
• The perfectly balanced valve unit ensures effortless liquid aspiration
• Precise and high sensitive meniscus setting
• A replaceable, hydrophobic membrane filter protects the interior from penetrating liquids
• Completely autoclavable
• With 3 µm membrane filter and manual