Autoclaves

Small, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).

Supply req.:

230 V 50/60 Hz

This autoclave is microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely selectable and has bacteriological filters included by default.

• Operating temperature range 100 °C to 134 °C
• On request, also available with B Class
• RS 232 interface
• Fully automatic functions
• With water reservoir, pre-vacuum and drying
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by Touch Screen microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Equipped with mesh stand on the chamber base and trays
• Supply requirements: 230 V 16 A single phase

These autoclaves are microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely programmable.

• Operating temperature range 100 °C to 134 °C
• On request also available with with vacuum pump and steam generator
• Agar modus (40 °C to 80 °C)
• RS 232 interface
• Timer
• Programmable auto-start (24 h)
• Fully automatic functions
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements in the interior of the chamber
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Supply requirements:

AES-12 and AES-75: 230 V 16 A single phase
AES-110 and AES-150: 400 V + Neutral (3-phase)

Accessories Accessory baskets for Digital vertical autoclaves, AES series

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

The CertoClav MultiControl 2 Touch is additionally equipped with a 7-inch robust high-resolution tablet. The operating steps are explained with videos on the screen.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy:
MultiControl 2: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller
MultiControl 2 touch: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller, tablet

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Stainless steel 316L
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

The compact and space saving table top units of the Laboklav 25 series provides you most applications of bigger table top units:

• sterilisation of liquids in open and lightly closed vessels, also with air re-cooling system
• sterilisation of instruments, also with pre-vacuum and drying vacuum
• waste sterilisation at 134 °C
• optional exhaust air filtration system
• volume of chamber: 25 l
• max. permissible pressure: 2.8 bar
• sterilising temperature: 98 to 138 °C

A unique design meets innovative technical solutions:

• optimal use of chamber volume - sufficient for 5 x 1 l standard bottle incl. cap
• lid made of temperature resistant safety glass and lid cover made of safety glass
• LED front lightning to visualise cycle progress
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

Chamber volume/Chamber size	25L useable , Ø 265mm x 465mm Chamber illumination by white LED light
Load:	e.g. 5 x 1L bottle up to 5kg instruments
Dimensions (W x D x H): Space requirement on the table: Weight:	440mm x 540mm x 660mm 440mm x 550mm + 110 for door overhang approx. 65kg
Max permissible pressure (PS): Max. permissible temperature (TS):	2.8 bar 138°C
Chamber material:	Stainless steel, chamber lid made from temperature proof safety glass
Housing:	Powder coated, red; Front cover from transparent safety glass; Process illumination (LED) in Blue, Red and Green
Steam generation:	Integrated steam generator with dry heating elements
Heating power: Electrical connection:	2kW 230V ~ 50 Hz, 16A
Lid closing system:	Motorized closing system
Sterilisation temperature: Feed water supply:	98 to 135 °C, adjustable Integrated feed water tank with manual filling
Exhaust steam condensing:	Included, discharge into integrated condensate tank
Thermo locking acc. to IEC 61010-2-43 (TRB 402):	Integrated with flexible reference temperature sensor opening, temperature adjustable
Control:	Micro processor with LCD Display; Code protected access to programming levels; Serial interface RS 485; Internal storage chip to store cycle data of approx. 150 cycles, visualisation and print out at a later stage is possible
Programms:	Up to 10 programms, depending on the integrated option, all programmes can be individualized
Norms and regulations:	Manufactured in Germany in full compliance with the relevant norms and regulations. Serial approval by German TUV, CE marking according Pressure Device Directive (Commissioned by factory service at an additional cost)

Accessories Accessories for Steam steriliser Laboklav 25

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 2 sizes with 50 and 80 liters of effective usable volume
• Innovative locking system with motorized lid including pressure and temperature monitoring
• Steam generation in the chamber
• High energy efficiency and long service life
• Rapid cooling for short cooling times
• Also available with flexible temperature sensor for the sterilization of liquids
• Timer function and 4 program groups with 3 sub-groups each, including night and dissolution program, adjustments for customized programs are always possible
• No water/waste-water installation required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries).
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are also available

Specifications
Automatic start:	1 minute to 7 days, Night programme
Time of sterilization:	1 to 300mins.
Power supply:	220-240V a.c.
Sealing:	at the push of a button, fully automatic
Boiler material:	SUS304 (rust resistant, stainless steel)

Accessories Accessories for HG series steam sterilisers

Tireless, durable and ingeniously simple

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 4 sizes with 25, 50, 85 and 110 liters of effective usable volume
• Simple, reliable and with a long service life, your perfect choice for standard tasks
• Optionally available with flexible temperature sensor for the sterilization of liquids
• For all devices up to 110 liters only a single-phase power supply (220/240 V; 50/60 Hz) is required
• Timer function and 3 program groups with a max. of 6 programs including dissolution program, adaptions for customized programs are always possible
• No installation to a feed water supply required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries)
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are optionally available

Accessories Accessories for HV series steam sterilisers

Laboklav 80 series provides an extensive and diversified range of equipment variants - customized for you laboratory application. The focus is on safe and reproducible processes, safety for the user and the environment as well as a comfortable operation of the autoclave. All steam steriliser are:

• suitable for the liquid sterilisation in open and lightly closed vessels, solid sterilisation and waste sterilisation at 134°C
• upgradable for high demanding laboratory applications
• volume of chamber: 80l
• max. permissible pressure: 2.8bar
• sterilising temperature: 98°C to 138°C
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

A unique installation concept for varied installation possibilities:

• The autoclave can be installed as vertical or as horizontal unit - without additional costs!
• The lid can optionally be opened to the right, to the left or backwards.
• All units can be delivered in three colours: red, green or blue.

Numerous equipment variants:

• vacuum system for difficult to de-aerate solids incl. fractionated pre-vacuum and drying vacuum
• fast re-cooling system for liquid sterilisation using a double jacket, without rejection of demineralised water
• upgrade of the re-cooling system with counter pressure and fan possible - for further reduction of batch times
• optional exhaust air filtration system

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
CertoClav Classic is the result of further development of the EL, but made of corrosion-resistant, electropolished stainless steel. Suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A timer is integrated.

Scope of suppy: Autoclav, stable instrument panel with 3 feeds, minimum water level indicator, power cable

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Free steam flow process
Chamber material:	Stainless steel
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller

Specifications
Chamber diameter:	240 mm
Chamber depth:	260 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Aluminium
Operating pressure:	2,7 bar
Heating capacity:	1900 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav EL