Labels

Manufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196 to 80 °C temperature range. Sticks to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters.
Supplied as white color or pack of 6 different colors matching the universal hazard color codes (yellow for chemical reactivity, blue for health hazards, green for safety, red for flammability, orange tape for biohazard and white for general use).

The DURAN^® TILT Light Shield is a removable white silicone sleeve that covers 94% of the bottle surface. The sleeve blocks damaging ultraviolet light, protects the glass surface from damage, and facilitates safer handling.

The DURAN^® GL 56 Bottle Tags can be used for individual colour coding or for fixing the light shield to the bottle.

DURAN^® bottle top vacuum filtration units for use with the TILT bottle (using an adaptor) or 45 mm media bottles. Manufactured in a Class 100,000 Cleanroom from Class VI non-cytotoxic materials. Supplied sterile.

Re-usable DURAN^® GL 56 filter adaptor allows the use of the TILT bottle with standard 45 mm bottle top filtration units. Manufactured from inert PTFE.

DURAN^® TILT GL 56 self-adhesive cap labels can be used to clearly indicate the separate bottles of media for each cell line, or types of media.

Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.
Supplied as white, color or as pack of 6 different colors matching the universal hazard color codes yellow for chemical reactivity, blue for health hazards, green for safety, red for flammability, orange tape for biohazard and white for general use. Rolls of 30 m.

• For one roll Write-On™ adhesive tape
• With epoxy-coated steel writing platform
• Weighted base with non-skid pads prevents sliding or lifting
• 76 mm core fits standard tape rolls up to 25 mm wide and accepts tape rolls having a maximum diameter of 133 mm
• Accepts 36.6 m as well as 54.9 m rolls
• Dimensions (W x D x H): 213 x 87 x 95 mm
• Dimensions of writing platform 102 x 152 mm

For customizing the white Cryo Boxes, the Rainbow Cryo labels are available in modern colors: red, yellow, green, blue, purple.

• Temperature-resistant down to -150 °C
• 50 labels per pack, divided into 5 colors, 10 pieces from each color

The required quantity of glue is dispensed "dot-wise" from a strip, even on difficult surfaces. The adhesive bond can subsequently be loosened easily and rubbed off without leaving any residue. Available in a variety of colours, as outlined below.

The "Globally Harmonized System of Classification and Labelling of Chemicals" (GHS) by the United Nations is the basis for a worldwide unification of existing national systems.

Film (labels on sheets):

• for indoor and outdoor use on smooth surfaces
• water, oil and alkali resistant, permanently adhering
• temperature resistance: -30 to +70°C

Perfect organizer for fast and efficient use of labels. Manufactured from clear acrylic and holds 6 label box. Drop the label box in the label dispenser and feed the paper through the slot. The writing surface enables easy and clean writing on the label. The sharp cutting edge helps to tear off the labels. A weighted base with nonskid pads prevents sliding or lifting. The article is delivered without pen.