Tube racks

Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base.

Chemically resistant racks for transport or sample handling. The product range includes racks for most vessel shapes. Accomodates vessels safely thanks to square wells and three holding levels. Mesh or slotted bottom prevent the sample vessels from falling through and enable the loaded rack to be transported. For use at temperatures from -40 to 121 °C. Autoclavable.

Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification.

Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable.
Each module of the Rota-Rack^® for large tubes holds 2 x 50ml tubes, 8 x 15ml tubes, 6 x 20mm tubes or 10 x 10/13mm tubes. Each module of the Rota-Rack^® for microtubes holds 6 x 15ml tubes, 9 x 1.5/2.0ml tubes, 12 x 0.5ml tubes or 32 x 0.2ml PCR tubes or 4 x 8-tube strips.

Two-tier, available in four different colours. These versatile racks are autoclavable and can be used dry, in water baths or in freezers. Each rack has an alpha-numeric reference for easy sample identification. Can accomodate 100x1.5ml tubes with closed caps or without caps, and 50x1.5ml tubes with open caps. Racks are stackable even when loaded and have (purpose) designed label spaces on each side (for bar coding, etc.).

Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable.

Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C.

Interlock on all sides.

Autoclavable. Our user-friendly cube racks are a must for any laboratory. Accommodate 4 x 50ml tubes, 10 x 15ml conical tubes, 12 x 75mm or 12 x 100mm tubes or 16 x 1.5 to 2.0ml microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Available in natural or assorted colours (blue, green, yellow orange and pink). Dimensions: 108 x 108 x 114mm.

Blue. For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled.

Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (L x W x H): 255mm x 137mm x 72mm when expanded, 21mm high when collapsed.