portable pH meters

Leak-proof and robust pH probes for pH meters 205, 206-pH1 and 206-pH2, insensitive to contamination, with maintenance-free gel electrolyte and gel storage cap.

Specifications
pH range:	0…14
Accuracy:	±0.02
Resolution:	0.01

BLAUBRAND^®. DIN EN ISO 648. DE-M marking. Calibrated to deliver (TD, Ex).

Disposal bags made of polypropylene foil for sterilisation in the steam autoclave. On request disposal bags are also available with imprint ”Biohazard“ if a sufficient number is ordered. For users of hot-air sterilisers, disposal bags made of polyamide are available for use up to +160 °C.

Properties:

• Ideal for the hygieni disposal of contaminated laboratory items

The Elite ORP pocket tester features a simultaneous display of the Oxidation-Reduction-Potential (ORP) measurement with temperature. With leakproof, transparent wide-base cap for upright standing with fill line indicator.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite ORP: Tester incl. batteries, lanyard
Elite ORP Kit: Tester incl. batteries, laynard, soft carry case

Specifications
ORP/RMV: Resolution: Accuracy:	-1000 ... 1000 mV ±1 mV ±2 mV ± 1 LSD
Calibration Points:	1 point
Temperature: Resolution:	0 ... 60 °C 0.1 °C
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	MTC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm 160 g
Power supply:	4 x AAA 1.5 V batteries
IP code:	IP 67

Flask carriers for Magnetic stirrers with or without handles as indicated.

For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.

Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).

Please order the appropriate inlay for the designated flask size.

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display

Scope of supply:
Set testo 205: Instrument, penetration probe, storage cap, belt and wall holder
Starter-Set testo 205: Instrument, penetration probe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 60 °C (short-term to 80 °C max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C
Operating temperature:	0 ... 50 °C
Dimensions (W x D x H):	38 x 145 x 167 mm
Weight:	135 g
Power supply:	Incl. 4 x batteries LR44
IP code:	IP 65

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

Checks the quality and temperature of cooking oil. Can be used in hot oil up to 200 °C, the user is protected from heat. Value is visualised by coloured display backlight (red, yellow, green). Protrection class IP 65, water resistant.

Scope of supply: Cooking oil tester testo 270, reference oil, plastic case, calibration protocol, training card, instruction manual and batteries.

Specifications
Range:	0.0 … 40.0 % TPM
Accurracy:	±2 % TPM (40 … 190 °C)
Resolution:	0.5 % TPM (40 … 190 °C)
Dimensions (W x L x H):	300 x 170 x 50 mm
Power supply:	2 x AAA (Micro)

Glass microfibre filters are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

• Increased strength
• Temperature resistant up to 500 °C
• Medium filtration speed

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
They provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Unlike other field meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.

• Easy calibration
• Sensors designed for every application available