-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Vials, Septa
LLG-2in1 KITs with Screw Neck Vials ND8 (small opening)
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged....
With silicone / PTFE septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
Crimp seals ND13
Crimp seals ND13 are made of aluminium. They are clear lacquered and have a 6 mm centre hole, a centre tear-off or complete tear-off. They are supplied with fitted septa made of a variety of materials.
The septa made of silicone white/PTFE red are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Septa, 12 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
Septa, 9 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
Standard well plates, 96 positions
All well plates made of PP and sealmats are fully chromatography tested. There are several advantages compared to usual vials and caps. Furthermore, the SBS/ANSI footprint assures compatibility with all well plate capable prep stations and chromatography autosamplers.
Well plates and sealmats are suitable for polar and non-polar solvents, in case of very critical analysis and very low sample concentrations....
22 x 8.4 mm, 4.3 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.620 798, 7.615 908, 7.613 328 and 7.613 394....
22 x 9.1 mm, 6.0 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.612 175, 7.620 146, 7.621 813, 6.204 710, 7.620 148, 7.620 147, 7.612 926, 7.615 808, 7.616 552 and 7.616 883....
Kits ND13
The LABSOLUTE® kits ND13 contain shrink-wrapped screw vials ND13 made of clear or amber first hydrolytic class glass and corresponding screw caps made of PP.
Septa with a double-sided PTFE coating show a very low particle formation during penetration.
Further kits are available on request....
