Wide-mouth bottles

UN-approved.
Type 1: Light cap, white, PP, tamper-evident ring, white, PTFE cup-shaped liner (without figure)
Type 2: Light cap, black, HDPE, tamper-evident ring, black, PTFE cup-shaped liner
Type 3: Bell cap, black, PP, tamper-evident ring, red, cup-shaped PTFE liner
Type 4: Bell cap, red, PP, with degassing membrane, tamper-evident ring, red, cup-shaped, perforated PTFE liner

DIN 168 - 1. EN ISO 4796-1. With graduations, pouring ring, PP screw cap with ISO thread.
Certificates are available on request.

With graduations. Leakproof screw cap. Multi-purpose bottles for universal use in the laboratory and in industry. Offers a good level of chemical resistance. Generous neck diameters offer easy filling and cleaning. Ideal for pastes, granulates and withstands heat filling.

Spray bottles (HDPE) with pump vapouriser (PP, stainless steel) and safety cap for the pump. Liquids can be finely vapourised at the push of a button in an environmentally compatible way. The transparent bottles make identification of contents easy. The protective cover prevents unintentional pressing of the pump and acts as a dust cover.

Multi-sided (octagonal), natural HDPE, with screw closure. With an extra-large neck opening, this container is ideal for disposal, storage, collection, transport, waste and sampling of dry substances.

For the storage and transport of photosensitive substances. With easy-to-read graduation and large labelling field for easy identification. UV protection up to approx. 500 nm wavelength. 10 ml and 25 ml with specially shaped glass rim for better pouring, thus an additional pouring ring made of plastic is not necessary.

• ISO 4796-1
• USP standard
• Retrace code
• Autoclavable

Clear glass. For storage and transport. The PTFE-lined screw caps make them ideal for taking samples.

Natural.

Laboratory bottle with GLS 80^® wide neck (80 mm diameter), autoclavable and up to 500 °C temperature resistant. Neutral / Type 1 glass acc. to USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. The wide neck is ideal for any application with powders or granulates, giving easier filling and emptying. With PP screw cap and pouring ring (autoclavable and temperature resistant up to 140 °C). With improved quick release cap which allows the bottle to be easily opened and closed with a minimum of turns.

Highly transparent. The coating provides scratch, leak and splinter protection and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C.

• With screw cap and pouring ring
• Graduated
• UV protection up to approx. 380 nm
• DIN thread
• DIN ISO 4796-1
• Suitable for microwaving
• USP compliant
• Autoclavable

The core moves freely and allows the vessel to be changed without twisting the securely attached tubing.

• For use with elastic, soft tubing of 6 - 9mm i.d. (Viton^®, Tygon^®, silicone)
• 2 x polypropylene, curved, hose connections on top and straight connections below
• Autoclavable
• Temperature resistant up to +140 °C
• Dishwasher-proof
• Optional filter top part for sterile pressure equalisation available

Protects light sensitive samples from UV/VIS light transmission during sampling, shipping or storage. Wide mouth allows easy retrieval of grab samples and reduces turbulence when filling. Single-use sample bottle. Leakproof.

• To ISO 4796-2
• With ground joint neck
• With glass stopper
• Hydrolytic class 3

With white PP screw cap and TPE gaskets. Most durable Nalgene-bottle. Large, thick-walled bottle with wide mouth for extra-rugged service. Withstand application of full vacuum for 24 hours at 20°C. Leakproof. Autoclavable.

Safe, durable, cost-efficient line of fluorinated wide-mouth bottles. Fluorinated surface provides improved barrier properties and reduces solvent absorption and permeation. Fluorination enhances long-term container performance, prevents material loss due to permeation and yields lower extractables. Wide mouth design allows for easy filling and dispensing of solid and liquid materials. Split- and puncture-resistant. Recyclable. Leakproof.

Natural. Square with recessed handle. Large, wide-mouth containers designed to be space-saving. Safe and easy to use.
Ideal for storing, collecting and transporting dry substances.

Tamper-evident cap 9.072 893 please order separately.

DIN 5090. Round thread neck in accordance with DIN 168.
Please order closure separately.

DURAN^®. ISO 4796-1, DIN ISO 718. Premium laboratory bottle with DIN thread. Highly leak-tight using Premium screw cap. Working temperature from -196 °C up to 200 °C. With PTFE coated silicone seal and pouring ring. With additional reverse scale, accuracy ±5%. Thermal shock resistance of 160K (tested by the German TÜV and with GS mark). Bottle and screw cap in accordance to USP/EP guidelines (Glass Type I / Neutral glass, screw cap raw material USP Class VI, seal FDA). Screw cap material is similar to PFA and highly resistant against chemicals. The material is free from colourants and therefore no leaching takes place. DMF available upon request. Premium bottle and screw cap fulfil highest requirements of the pharmaceutical, chemical and food industry. With Retrace code (Batch identification). Certificate available via the Internet (available for cap and bottle). Autoclavable.

With PTFE / silicone seal made of PPS (polyphenylene sulphide). With PTFE / silicone seals having a particularly high level of mechanical resistance, even in temperatures up to 250°C. The non-slip, knurled outer surface ensures the screw cap can be closed securely and opened easily. The closure incorporates a PTFE-faced silicone seal wad and the substance in the container only comes in contact with PTFE. The silicone wad levels out any unevenness in the container neck.

Transparent. With PP screw cap. Good chemical resistance, ideal for storage of liquids. Autoclavable at 121 °C (2 bar) according to DIN EN 285 (except 5000 ml). Food-safe product according to regulation (EU) No. 10/2011. Size 5000 ml with a carrying handle made of HDPE.

The GLS 80^® quick release thread allows opening and closing of bottles with three-quarters of a turn. This closure contains dyestuffs. There is a lower risk of contamination due to the double-sided PTFE-coated silicone seal. The medium only comes in contact with PTFE. The matching pouring ring made of PTFE allows clean, drip-free working. Please order separately.

• Good mechanical stability
• High chemical resistance
• Autoclavable / suitable for hot-air sterilisation
• Tmax: 180°C

DURAN^® reagent bottles, DIN thread, ISO 4796. Pressure resistance, as a result of amended shape, in the range of -1 up to +1.5 bar (tested by the TÜV in accordance with DIN EN 1595, with GS mark). Neutral / Type 1 glass in accordance with USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. Autoclavable.
Please order cap and pouring ring separately.

Cap from PP, membrane made of PTFE with 0.2 µm pore size. Ideal for autoclaving processes because the membrane permits pressure equalisation and tight sealing, reducing the risk of contamination. Temperature resistant up to 140°C. Typical applications: storage or transport of gas generating media, autoclaving of media.

For cell culture, Greiner Bio-One offers standard and filter cap cell culture flasks with growth areas of four different sizes. Suspension culture flasks complete the range in another sizes.They are made of high-grade polystyrene. The special design of our cell culture flasks makes it possible to efficiently reach the cell lawn with a cell scraper, whilst still providing optimal access with a pipette. The special neck
design reduces the risk of wetting the inside of the cap with medium, thus providing additional protection against contamination. The stacking rim on the top of the flasks ensures firm standing and easy stackability in the incubator.

Properties:

• Hydrophobic surface, ideal for suspension cultures, hybridoma and embryonic stem cells
• Suspension culture flasks with filter screw cap
• Canted neck
• Graduation on both sides
• Sterile and user-friendly packaging
• 50 ml, 250 ml, 550 ml and 650 ml volumes available

With white HDPE screw closure. Reduced permeability to CO₂/O₂ which reduces pH-shift. Bottles and closures are radiation-sterilised and pyrogen-free to eliminate costly washing, depyrogenation and autoclaving steps. Heatshrink band around closure and neck provides tamper-evident seal. Packed in shrink-wrapped trays. 2L size has molded-in handgrips and a 53-mm (53B) white closure. Bottles are sterile to 10-6 SAL, non-pyrogenic, non-cytotoxic and comply with USP Class VI guidelines. Sterile. Transparent. Leakproof. Graduated.