Elemental analysis

This test paper allows the quick and easy detection of strong oxidizers such as nitrite and free chlorine. Potassium iodide starch paper is also used to control diazotization reactions. Nitrite or free chlorine oxidize potassium iodide to form elemental iodine which reacts with starch to a blue-violet complex. Potassium iodide starch paper may be used by dipping it into the sample or by applying drops of the sample onto the paper. To detect gaseous oxidizers, the paper is moistened with distilled water and then exposed to the gas in question.

For rapid detection of oil in water and/or soil.
Box of 100 strips.

These test kits are specially developed for testing boiler, cooling and industrial process water. They make use of both colorimetric and titrimetric techniques. Each test kit contains all the necessary chemicals and reagents in liquid
or powder form to conduct the tests. The detailed instructions contain a step-by-step explanation of the test procedure. The kits are supplied in a sturdy, compact plastic case.

• Fast quantitative determination
• For testing boiler, cooling and industrial process water
• Suitable for field and laboratory testing
• Cost-effective use due to keenly priced refill packs

• Reliable and precise
• Non-bleeding
• Easy and quick analysis
• Made in Europe

The test paper allows the quick and easy detection of hydrogen sulphide. This gas occurs in the processing of raw oil. It is toxic even in low concentrations. Therefore, critical points are carefully checked. Sulphide containing solutions also give a positive reaction. Lead acetate is toxic and the test paper needs to be declared as hazardous. The technically equivalent Sulphide test paper is a non-toxic and safe alternative.

Most of our special test papers are semi-quantitative. They have a high-quality colour chart that allows quick and easy determination.

Arsenic-test paper. 200 strips. Dimension: 20 x 70 mm

Initial equipment for HPLC with b.safe-Caps for bottles with thread GL 45. Furthermore fittings for easy connection of capillary tubing, blind fittings for closing unused connections and air valves for a trouble-free withdrawal of solvents are included. For up to 4 storage bottles.

Scope of supply:
Starter Box 1:

• 3 x b.safe-Cap GL 45 with 2 connections UNF ¼" 28G
• 1 x b.safe-Cap GL 45 with 3 connections UNF ¼" 28G
• 4 x Air valve with service life indicator
• 5 x Fittings yellow for tubing O.D. 3.2 mm
• 1 x Blind fitting

• 4 x b.safe-Cap GL 45 with 3 connections UNF ¼" 28G
• 4 x Air valve with service life indicator
• 8 x Fittings yellow for tubing O.D. 3.2 mm
• 4 x Blind fittings

• 4 x b.safe-Cap GL 45 with 4 connections UNF ¼" 28G
• 4 x Air valve with service life indicator
• 12 x Fittings yellow for tubing O.D. 3.2 mm
• 8 x Blind fittings

Simple, completely impregnated indicator papers without colour scale. For orienting measurements and adjustments in different pH ranges.

CMS"s electronic microchip-measurement system is currently one of the most accurate and reliable on-site detection systems for the measurement of gas concentrations. It comprises a substance specific microchip and an analyzer which takes measurements and displays the results on a digital screen. With one chip it is possible to take 10 different measurements of a known substance. Each measurement is carried out using the display menu operated by a single switch. Even new users will find its operation easy and trouble-free. 50 individual measurements can be stored in the integral data recorder at any one time.

The test kits have been specially developed for the analysis of boiler, cooling and service water.

As complete spectrophotometers, the NANOCOLOR^® VIS II and NANOCOLOR^® UV/VIS II meet all requirements of your daily laboratory work. They come with the well-known barcode technology for NANOCOLOR^® tube tests for fast measurements. Besides, they offer the possibility of extensive CIE-conform color measurements and scan-performance in real time. In addition to turbidity measurements, the devices offer comprehensive and free of charge brewery analysis according to MEBAK.

NANOCOLOR^® VIS II and NANOCOLOR^® UV/VIS II reduce the complexity of your daily laboratory work with easy menu guidance and icon-based procedures of the cuvette tests stored in the instrument. The clear result window enables an easy assignment of sample information to the measurement result. The step-by-step menu guidance for the calibration of special methods creates a simple entry level into user specific analytics even for inexperienced users.

Scope of delivery: Spectrophotometers, the NANOCOLOR^® VIS II or NANOCOLOR^® UV/VIS IIincl. manual (Quickstart guide), protective covering, power cable, USB cable, USB stick, calibration cuvette, touchpen, cleaning cloth and certificate

Powder reagents in individually sealed packages.

Swimming Pool Test 3 in 1
This test allows the quick and easy determination of the water quality in swimming pools. It provdies valuable results about the total alkalinity, free chlorine and pH.

Free chlorine: 0.5 - 1 - 3 - 5 - 10 mg/L Cl₂
Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO₃
pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4

Swimming Pool Test 5 in 1
Test strip for semi-quantitative determination of free and total-chlorine, alkalinity, pH and total-hardness in pool water.
Chlorine, free: 0.5 - 1 - 3 - 5 - 10 mg/L Cl₂
Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO₃
pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4
total Chlorine: 0 - 1 - 3 - 5 - 10 mg/L Cl₂
total Hardness: 0 - 100 - 250 - 500 - 1000 mg/L CaCO₃

Ozone Test
This test is used for the quick and easy determination of ozone in air.
Range: <90, 90 - 150, 150 - 210, 210 µg/m3 ozone

For retrofitting compression-proof deionisers from Evoqua (For other manufacturers on request).

The reference standards are designed to check the accuracy and the reliability of the results. The shelf life of reference standards is two years from the date of production, provided that storage and use are in accordance with the instructions provided.
Applications: Water Treatment, Waste Water, Cooling/Boiler Water, Pool-Water, Beverage Industry, Laboratory and Field Testing.

Standard solutions are solutions with a defined concentration and are provided to check the operation methods and devices of the cuvette tests as well as the condition of optical filters and the instrument.