-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Half masks
Half masks have a very wide range of applications. They are a simple and inexpensive way to protect you against aerosols, vapours, gases, microorganisms, viruses and and similar hazards. The respirators are available with replaceable or integrated filters, as disposable or reusable products. Most of the FFP2 or FFP3 type fine dust masks for single-use by Dräger, 3M, Ekastu and other brands follow EN 149:2001.
Half Mask 620 N and 620 S
All masks approved according to EN 140 and certified according to council directive 89/686/EEC. Standard thread connection according to EN 148-1 which allows cost-efficient use of standard screw-filters besides insert filters and reusable holders. The masks can be used as pure filtration device and also as a mask for light airline systems. Two exhalation valves ensure low respiratory resistance. Ergonomic design of the mask bodies and sealing zone as well allow one single size of mask for all faces....
Half Mask Series 6000
Economical and easy to wear. The 3M™ 6000 Series half masks have a good price and performance ratio. They are low- maintenance, easy to handle and extremely lightweight . Available in 3 sizes.
- Extremely lightweight mask body
- Unobstructed view due to compact design
- Double filter system for good weight distribution
- Wide range of filters for a variety of uses
- Compatible with 3M ™ goggles
Half mask, Polimask BETA
- double filter half mask made of EPDM offering optimum protection during any type of activity
- 2 inhalation valves minimise the inhalation resistance
- 1 large exhalation valve ensures low exhalation resistance
- comfortable head harness with neck clip
- by turning the filter holder it is possible to change the angle of vision or expand the field of vision
- careful airflow routing allows use with spectacles
Respiratory Protection - Plug-In Filters for Half Mask 620 N and 620 S
Tested and approved to EN 143 / EN 14387 standards with CE mark. Insert filters are connected to the mask by a filter adapter. The filter adapter is fitted with thread connector acc. to EN 148-1. Particle filters consist of a light PE housing with a built-in glas fibre filter. Special folding provides a large filter surface area in a confined space. A pre-filter collects aerosol mist and dust and prevents rapid accumulation of dirt particles in the main filter, thereby prolonging its lifespan. Easy to exchange by inserting into the outer chamber of the filter mount. Flame resistant....
Respirators silv-Air c, Moulded Masks
These filter classes are minimum requirements and simply serve as a guide. It is the wearers" responsibility to make sure the breathing apparatus conforms to the requirements in terms of hazardous materials and concentration before use!
FFP 1: for particles that are neither toxic nor associated with fibrosis. For protection up to 4 times the corresponding threshold limit value...
X-plore® 3300, 3500 and 5500
Safe and easy bayonet connection. A unique two-point bayonet connector
attaches both filters to the mask using the same technique. Compact, low-profile design. The swept-back position of the filters guarantees a wide field of vision free from obstruction and ensures optimal fit for use under protective visors. Three sizes (S, M, L) ensure a perfect fit for every type of face. High grade materials provide extreme comfort when worn. Innovative, X-guided, strap system. Cross-over straps ensure an even weight distribution....
Filters for half mask polimask 230
Particle filter 230 P3R D*
- protection against particles of toxic and highly toxic substances
- with innovative BIOSTOP treatment
- protection against organic gases and vapours with a boiling point > 65°C, inorganic gases and vapours, sulphur dioxide, ammonia and particles as well as particles of toxic and highly toxic substances (P3), with innovative BIOSTOP
Filters for polimask BETA half masks
Gas Filter 200 A1
- Protection against organic gases and vapours with a boiling point > 65°C
- Protection against particles of toxic and highly toxic substances, with innovative BIOSTOP
Fine Dust Filtering Half Mask silv-Air High Performance
FFP 3 - climatec half-mask High Performance with triple cavity system
- triple cavity system for maximum filter performance with lowest breathing resistance
- extended operation because of the larger filter surface incorporating two additional cavities
- effective regulation of the temperature in the mask by climatec - comfort
- innovative, shape-optimised design
- highest safety (certified according EN149 safety-level FFP3)
- anatomical design and soft-compound edges avoid bruising to the face
- easy to differentiate by colour coding (black - FFP3)
- compatible with safety spectacles because of the optimised nosebridge
- circulatory venting via the soft-compound edges prevents fogging of safety spectacles
- seamless, continuous headband for comfortable and secure mask fit
- flexible textile headband with neck clip for individual adjustment
Half Mask Polimask 330
- with standard thread connection acc. to DIN EN 148-1
- mask body with exhalation valve and chin support
- made of soft EPDM
- especially suitable for use over prescription spectacles
- the connector allows the half mask to be used with screw filters up to 300g, pressure hose devices and turbo unit respiratory systems