Magnetic stirrers with heating and motor

Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 1000 temperature sensor is included with purchase of RET control. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, "HOT" sign flashes when the unit is switched off but surface is still hot.

RET^® control-visc white with chemically resistant hot plate.

• BNC socket for connection of a pH electrode
• Adjustable temperature control mode: rapid heating and very accurate temperature control
• Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature
• Timer and countdown functions
• Display of viscosity change trend
• Detached magnet detection
• Intermittent operation
• Several modes of operation available
• Safety circuit adjustable from 50 to 380°C
• Transparent protective cover included
• Error code display for easy troubleshooting
• Exact temperature and speed adjustment by means of digital display; even when function switched off
• Digital display of the safety temperature limit
• Suitable for unsupervised operation
• Sealed casing (IP 42) ensures a long service life

For synchronous stirring and heating at homogeneous temperatures up to 120 °C.

• CerAlTop™ plate - easy cleaning and maximum resistance
• Brushless motor guarantees constant speed
• SpeedServo™ technology maintains speed constant when viscosity of the medium changes
• Digital speed and temperature display
• Aluminium heating plate with ceramic coating
• Digital interface with icons
• Integral timer
• Programmable auto-reverse of the stirring direction
• Hot plate warning when the plate temperature is above 50 °C
• Lock feature prevents unintentional changes
• Max. medium temperature 70 °C (depending on the vessel)

The magnetic stirrer C-Mag HS 7 control has a square top made of ceramic which offers excellent chemical resistance. The C-Mag HS 7 control improves over time with regular firmware updates. Control of kinetics and sensitive reactions are supported by the integrated timer and counter function.

• Alteration of the stirring direction possible
• Clearly arranged LCD display
• Temperature control directly in the media with PT1000 temperature sensor
• Adjustable safety circuit up to 650 °C
• IKA SmartTemp^® hot surface warning to prevent burns
• Elevated control panel for protection against leaking liquids
• Timer
• USB / RS232 interface
• 10 years warranty

With 3 independently adjustable aluminium hotplates, Overheat protection mechanism and warning light which switches on when the plate temperature exceeds 50°C. With facility for mounting a 12.5mm retort rod at the rear of each plate and 3mm x 25mm PTFE coated followers.
With BioCote, silver-based, antimicrobial protection.

Without heating.

• High power
• Flat stable stainless steel housing
• Non-locking motor
• Adjustable speed
• LED digital speed display
• 0 to 56 minute timer, or continuous operation

Digital magnetic hotplate stirrers with 5, 10 or 15 positions, designed for synchronous heating and stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. The surface temperature is infinitely adjustable up to 120°C, producing a maximum medium temperature of 70°C (depending on type of vessel). Speed remains constant, even when load changes.

• Homogeneous temperature distribution across heating plate
• Adjustable reverse operation
• Eco-mode for a low self-warming of the surface
• Wear free magnetic coils
• Error code display
• Easy operation with touch keypad
• Suitable for continuous operation
• Adjustable speed in increments of 10rpm

With non-mechanical, electronic induction drive and dust / watertight housing. Ideal for batch series stirring and for use in water baths. Choice of 6-place stirring position models (06.xx) which can stir up to 6 x 1 litre erlenmeyer flasks, 15-place models (15.xx) for up to 15 x 250 ml beakers and 60-place models (60.xx) for small sample containers and, using appropriate test tube stands, up to 60 test tubes or centrifuge tubes. Can be remotely operated and is supplied with controller. Available as standard, high-power 20 watt or ultra high-power 40 watt versions.

Stirring - Powerful 15 stirring points, maintenance-free and wear-free by 2mag inductive drive, extremely wide speed range of 100 rpm to 2,000 rpm, 100 % synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.

Heating - Heating plate made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, fast heating-up by powerful integrated electrical heater, homogenous temperature distribution, maximum heating temperature +200 °C, Power Detect for automatic compensation of physically determined loss in stirring power which can come up to 40 % at high temperatures, independent over-temperature protection inside the plate.

Small, lightweight magnetic stirrers for volumes up to 5 l. Ideal for titration, BOD determination, microbiological and biochemical applications.

• Set-up-plate remains cold even in continuous use
• Stirring speed up to 1100 min-1
• Pale set-up-plate
• Accurate speed control even at low speeds
• Splash-proof housing