Microlitre Syringes

Point Style 2 (pst2): 12° bevelled non-coring needle point recommended for septum penetration. Ideal for gas chromatographic applications.

Point Style 3 (pst3): Blunt needle point (90°) for use with HPLC injection valves. Also recommended for applications where exact dosing is required (e.g. thin layer chromatographs).

Point Style 4 (pst4): 10-12° bevelled needle point recommended for life science applications; sharp point for animal injection.

Point Style 5 (pst5): Conical needle with side port for penetration of septa, thin-gauged vinyls and plastics without coring; minimizes septum damage

Point Style AS (pstAS): Special conical style needle point (8° taper) designed to withstand the demands of multiple injections; exclusively used on GC autosampler syringes
Hamilton Neuros™ syringe technology provides unprecedented functionality for controlled injections e.g. of tissues and animals. An industry first, the Neuros™ accurately dispenses 50 nL to 100 µL of liquid through an ultrafine needle protected by a custom-designed sleeve. Developed specifically for the neurosciences, the Neuros minimizes injection site damage by increasing needle rigidity and delivering a microvolume of liquid to an exact location.

• Adjustable needle exposure of 0 to 20 mm
• Almost no dead volume
• Needle rigidity improves insertion path accuracy
• Minimal tissue damage reduces injection variability
• Reduced sample loss saves money and materials
• Fine gauge needle creates smaller injection sites
• Compatibility with most infusion pumps and stereotaxic holders means an easy integration into existing processes
• Also available as beveled 12° point (point style 4)

Glass barrel with PTFE-coated plunger and seal, and Luer lock outlet. With 6-32 UNC female thread. Allows attachment to drive arm mechanisms, e.g. Microlab 500 Series diluters/dispensers. Gas-tight microlitre syringe without needle. TLLX= Plunger stop fitted to prevent damage to the PTFE seal. Prevents the plunger tip from reaching the end of the syringe.

Glass barrel with PTFE-coated plunger, seal and with Luer Tip (LT).
Gas-tight microlitre syringe without needle.

Point Style 2 (pst2): 12° bevelled non-coring needle point recommended for septum penetration. Ideal for gas chromatographic applications.

Point Style 3 (pst3): Blunt needle point (90°) for use with HPLC injection valves. Also recommended for applications where exact dosing is required (e.g. thin layer chromatographs).

Point Style 4 (pst4): 10-12° bevelled needle point recommended for life science applications; sharp point for animal injection.

Point Style 5 (pst5): Conical needle with side port for penetration of septa, thin-gauged vinyls and plastics without coring; minimizes septum damage

Point Style AS (pstAS): Special conical style needle point (8° taper) designed to withstand the demands of multiple injections; exclusively used on GC autosampler syringes
10µl to 250µl

• for use with gases and liquids
• removable needles (RN) or cemented needles (N)
• precision-machined PTFE-tipped plungers
• reinforced plungers
• plunger assemblies and glass barrels are replaceable

Type A: Standard plunger protection syringe
Type B: Guided plunger syringe

• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub made of Polypropylene
• Colour-coded hub conforms to ISO 6009
• Box of 100 pieces

• Graduation in ml for volume dosing, scale is extended over the nominal volume
• Material: Barrel: Polypropylene, Plunger: Polyethylene
• Highly transparent barrel with green plunger and black graduations for ideal readability, permanent marking
• Safe plunger backstop for easy pulling up to the maximum volume
• Silicone oil-free
• Luer Slip to put on the needle, centric or eccentric or Luer Lock conus, centric
• Latex- and PVC-free
• Sterile, single packed or non-sterile bulk packing
• Manufactured according to EN ISO 7886-1

Syringe barrel and plunger made of polypropylene (PP), double sealing ring made of green latex-free elastomer (TPE). All sizes with Luer concentric nozzle.

• EO sterilized, single packs
• Latex and PVC-free
• Plunger lubricant silicone oil
• Plunger stop by retaining ring
• Ribbed thumb rest surface

• Ultra sharp cut by Lancet Point technique
• Stainless steel cannula with special silicone coating
• Transparent and color-coded Luer-Lock thread acc. to EN ISO 6009

• Large volume range from 1 to 99 mL
• Same precision and accuracy as other Gilson pipettes
• Maintenance-free
• Reduction of workload
• Great versatility

With Luer push-on fitting for use with disposable syringes. Supplied sterile in boxes of 100. Colour-coded.

For 25 to 500 µl Syringes.

For 1 to 2.5 ml syringes and 500 µl eVol syringes.

Bevelled, Luer-Lock, autoclavable.

Bevelled, Luer-Lock, autoclavable.

With Luer-Lock fitting.

PTFE-coated plunger and seal, and Luer lock outlet. Gas-tight microlitre syringe without needle.

Point Style 2 (pst2): 12° bevelled non-coring needle point recommended for septum penetration. Ideal for gas chromatographic applications.

Point Style 3 (pst3): Blunt needle point (90°) for use with HPLC injection valves. Also recommended for applications where exact dosing is required (e.g. thin layer chromatographs).

Point Style 4 (pst4): 10-12° bevelled needle point recommended for life science applications; sharp point for animal injection.

Point Style 5 (pst5): Conical needle with side port for penetration of septa, thin-gauged vinyls and plastics without coring; minimizes septum damage

Point Style AS (pstAS): Special conical style needle point (8° taper) designed to withstand the demands of multiple injections; exclusively used on GC autosampler syringes

For Shimadzu AOC-14, AOC-17, AOC-20 and AOC-20i. Needle tip: cone.
Article 6.205 989 with GT plunger.

Removable, with Luer tip. Needle length: 51 mm.

For 10 µl syringes.

For 5 µl syringes.

For 5 µl syringes.

For 25 µl - 2.5 ml syringe valve.