-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Minicentrifuges
Microcentrifuge 5430 / 5430 R (General Lab Product)
These centrifuges are used with e.g. rotors for Eppendorf Tubes
® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes
® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).
Microcentrifuge 5430...
Centrifuge CVP-2
The CVP-2 enables the simultaneous sample preparation of multiple samples at one time. Versatile through being able to hold non-, semi- and fully-skirted PCR plates with no additional accessories required.
- Centrifuge and vortex mixer combined for significant time saving
- Independent vortex and centrifuge timers with up to 999 cycles
- Adjustable rpm or 4 programmable presets
- Consistent preparation of up to 192 samples continuously
Minicentrifuges MiniSpin® and MiniSpin® plus (General Lab Product)
The powerful and user-friendly MiniSpin ® and MiniSpin ® plus microcentrifuges are extremely compact and have a small footprint. Depending on your needs, you can choose between two models. MiniSpin ® plus provides the speed required for molecular biology separations....
Centrifuge Multi-spin PCV-6000
Combined centrifuge/vortex mixer for microtubes and 0.2ml strips. For independent centrifuge and vortex mixing operations, or a programmable sequence of spin and mix phases of multiple tubes.
- Vortex mixing intensity: three stage adjustment (soft, medium and hard)
- Interchangeable rotors for 2.0ml, 1.5ml, 0.5ml, 0.2ml microtube combinations and 0.2ml strips
- Timed vortex mixing: 1sec to 20sec
- Supplied with 2 rotors: 12 x 1.5/2.0ml and 12 x 0.5ml plus 12 x 0.2ml
Centrifuge/vortexer, Combispin PCV-2400
Combined centrifuge/vortex mixer for microtubes and 0.2 ml strips. For independent centrifuge and vortex mixing, or mixing of an individual tube concurrently with spinning of multiple tubes. The vortex cup, located at the top of the central shaft, emerges through an opening in the closed lid. In spin-mix-spin applications, the Combispin can be used with very low reagent volumes....
Micro Centrifuge Microspin 12
Compact high-speed benchtop micro centrifuge with a built-in rotor for 12 x 1.5/2ml
microtubes. Ideal for biomedical laboratories.
- Fixed angular aluminium rotor accommodates 12 x 1.5/2 ml microtubes, supplied with 12 adapters for 0.2ml and 0.5ml tubes and fixing lid (rotor autoclavable, lid not autoclavable)
- Timed operation (1 to 30 minutes), with automatic switch-off
- Suitable to use in cold rooms, operating temperature ambient 4°C to 25°C
- Metal protective inserts inside the lid and casing, automatic imbalance switch-off and locking of a lid provide safe operation
- Constant airflow around the rotor reduces risk of samples overheating during centrifugation
- Simple push-buttons and a clear 2-line LCD status display shows actual and set values of time, set and actual speed and relative centrifugal force (g-force)
- Low voltage cord easily fits through refrigerator or workstation door gaskets
- Compact design and quiet in operation
- Fits neatly and unobtrusively into the workspace
Microlitre centrifuge Z 167 M
The Z 167 M is ideally suited for the routine centrifugation of reaction tubes. Equipped with a powerful drive, it accelerates the 18 x 1.5/2.0 ml rotor in a very short time to approx. 16000 xg. Color visual representation of the operating state such as standstill, sleep mode or centrifugation.
- Microprocessor with large LCD display
- Electromagnetic lid lock
- Active imbalance identification and cut-off
- Air Cooling System
- Permanent indication of pre-set and actual values
- Storage of up to 99 runs
- Noise level < 57 dBA, at max. speed
- Splash-proof foil keyboard with touch function
- Manufactured in accordance to International Safety Regulations, i.e. IEC 61010
Microliter Centrifuge Z 207 M
The Microliter Centrifuge, Z 207 M was designed specifically for small, compact spaces, suitable in any laboratory setting. Option for two different rotor types: a Fixed-angle rotor for 24 x 1.5/2.0 ml (also hermetically sealed available) and a rotor for Spin Column Kits.Distinct control panel "Touch" function for easy operation, also with gloves. Optimum air cooling of the samples even at maximum speed....