Burners

With heart screw.

Alternative Hook connector

Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.

• Heats up quickly, constant heating
• No open flames, no soot, odourless
• Integral continuous electronic power adjustment between 0% and 100%
• Casing safe to touch even when hot
• Built-in casing handles for safe transport
• Inert ceramic, long-life heating element
• Built-in overheat monitor
• Protection of electrical components against spilled liquids
• Additional side safety shield on burner element
• Includes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod

Specifications:
Connector:	800W / 230V
Dimensions (W x D x H):	150 x 150 x 170mm
Weight:	approx. 2.5kg
Max. temperature:	900°C
Heated area:	100 x 100mm

Accessories  Alternative Infrared burner, PowerCube IRB1

The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.

Advantages:

• Particularly safe as no open flame is used
• Stable thanks to practical cube shape. The casing itself only gets slightly hot in use
• Accelerated heating-up rate in comparison with other electrical heating devices
• Heating element sealed in ceramic, therefore insensitive to external influences (spillages)
• Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°C

Specifications:
Heating power:	250 W
Overall (W x D x H):	100 x 105 x 105 mm
Weight:	approx. 700 g
Max. temperature:	700 °C
Heated area:	60 x 60 mm

Accessories Accessories for Infra-red burner, PowerCube IRB1 Accessories  Alternative Infrared burner PowerCube IRB2

Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.

• Sturdy and maintenance-free
• No gas, no open flame - Works with standard electrical power
• Intuitive, easy to use
• Instant, ready-to-use, no warm-up time, no waiting
• Sterilization temperature: 900 to 1300°C
• Touch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)
• For use in Laminar Flow Cabinets
• Ideal for mobile operation in the field

The schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).

Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)

Specifications
Dimensions (W x D x H):	152 x 195 x 210mm
Weight:	approx. 2500g

With stopcock. Air regulation, max. 1300°C. An anti-slip rubber coating under the base ensures absolute stability.

Maximum temperature 1300°C, with needle valve, thermo safety element (bimetallic flame sensor with magnetic lock), air regulator and pilot light. Nickel-plated brass and steel. An anti-slip rubber coating under the base ensures absolute stability.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Teclu burner, Ms-Ni

Flat conical form. With ground on cover. Without filling inlet, without wick or nozzle (please order separately).

Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories  Alternative Spirit burner, 18/10 steel

Nickel-plated brass and steel. DIN 30665. max. 1300°C, with needle valve, air regulator and pilot light. An anti-slip rubber coating under the base ensures absolute stability.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper

Teclu burner with stopcock and pilot flame DIN (NG-2411 BO0033)

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Teclu burner, Ms-Ni

DIN 30665. Air regulation, spar flame.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners Alternative Teclu burner, Ms-Ni

Acc. to DIN 30665, with air regulation, without low flame.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Teclu burner, Ms-Ni

Acc. to DIN 30665, with air regulation, with low flame.

Please order safety base (shown in image) separately.

Accessories Gas safety tubing, rubber Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

Burners according to DIN 30665 cannot be switched off completely. A small flame remains burning even if needle valve or stop cock are turned off. The gas flow shall be disconnected by means of the central stop cock in the laboratory.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Bunsen burners Alternative Bunsen burners with air regulator and needle valve

Customize your water purification system with the Thermo Scientific™ Barnstead™ Easypure™ RoDi Accessories and Consumables that best suit your application. Cartridge kit includes pre-filter, ultrapure mixed bed cartridge and Easypure high purity/low TOC cartridge.

Accessories Accessories for pure water purification system Barnstead™ Pacific TII and RO Alternative Pure water purification system Barnstead™ Pacific™ RO Alternative Pure water purification systems Barnstead™ Pacific™ TII

For metallic gas cartridges according to DIN EN 417:2012. Outside thread M 10 x 1.

• Volume 150 ml
• Adjustable

Alternative Spirit lamp, soda-lime glass Alternative Spirit burner, 18/10 steel

DIN type. With thread connection, ignition protection, thermocouple, G1/4 left-hand thread, air regulation, pilot flame and needle valve. Burnerhead Ø 17 mm

Accessories Tubing Connection for Teclu burners with thread connection Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Accessories for Bunsen and Teclu burners

Other connection threads available.