Filtration apparatus

PP monofilament depth filters for use as prefilters or for the filtration of samples in water or organic solvents. The high loading capacity allows the purification of solutions with a high particle load.

• Choice of filtration areas and porosities
• Maximum operating pressure 4.1 bar forward, 3.0 bar reverse
• Capsules may be used in either direction
• Low hold-up volume with air purge
• Autoclavable
• Operating temperature max. 60 °C
• Connectors: stepped barb (SB), hose barb (HB) and female national pipe thread (FNPT)
• Filter PP

Alternative Disposable Filtration Capsules, Polycap TF™

Bottle shape. Vacuum resistant. Not in accordance with the equipment and product safety regulation.

• ISO 6556
• USP Standard
• Olive diameter 11 mm

Thick body with reinforced rim. Incl. an acid resistant sintered glass disc.

Alternative Filter funnels VitraPOR®, Borosilicate glass 3.3 Alternative Filter funnels, glass DURAN® Alternative Filter crucibles, DURAN®

If you want your liquids and gases to be ultra-cleaned or sterilized during pressure filtration, then the stainless steel filter holders are perfectly designed for you. Autoclaving with membranes is no problem thanks to the PTFE-coated supporting sieve.

A reusable, autoclavable filter holder for determining colony and particle counting in connection with a filter flask or manifold. For use with Sartorius membrane filters and nutrient pad sets.
Capacity: 250 ml.

Type 310.
For use with any filtering flasks or vacuum distributors. With vacuum seal which can be used instead of a rubber stopper. Nominal filtration area 11 cm² (adapted for 47 - 50 mm filter). With support plate.

Ideal for biological and pharmaceutical sterile filtration. PES membrane features low protein binding, low level of extractables and a high flow rate. Now available in three pore sizes: The best filter units with 0.20µm and 0.45µm pore size and new to the protection of valuable cell cultures from mycoplasma with 0.10µm pore size. Filter top and filtrate bottle are graduated. Blue color-coded collar with cellulosic vent plug side arm and quick-disconnect tubing adapter. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.

The WHEATON^® filtering apparatus are available with fritted glass support, with stainless steel support or with PTFE support. The glass components are manufactured from WHEATON^® low extractable borosilicate glass 3.3. that conforms to ASTM E 438 Type I, Class A requirements. The 25 mm filtering apparatus are designed to handle small volumes of liquids, the 47 mm filtering apparatus are suitable for volumes up to 1000 ml. The 90 mm filtering apparatus are recommended for large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required.

Furthermore, the following versions are offered:

Filtration assemblies with stopper connections:

• Designed for analysis of particulate or microbiological contamination
• For flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubing

Filtration assembly with standard taper 40/35 joint connection:

• Recommended for routine filtration of organic solvents, corrosive liquids and the removal of particulates from HPLC solvents
• Ground glass connection eliminates phthalate contamination that can occur from silicone or neoprene stoppers
• Drip tip on the support bases extends below the hose connection preventing filtrate from entering the vacuum line
• For flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubing

Filtration assembly with GL45 thread connection:

• Designed to collect the filtrate directly into a standard laboratory bottle
• Connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ring

Recommended for general filtration.

Includes a coarse porosity (40-60 µm) fritted glass support base and graduated funnel.

The WHEATON^® filtering apparatus are available with fritted glass support, with stainless steel support or with PTFE support. The glass components are manufactured from WHEATON^® low extractable borosilicate glass 3.3. that conforms to ASTM E 438 Type I, Class A requirements. The 25 mm filtering apparatus are designed to handle small volumes of liquids, the 47 mm filtering apparatus are suitable for volumes up to 1000 ml. The 90 mm filtering apparatus are recommended for large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required.

Furthermore, the following versions are offered:

Filtration assemblies with stopper connections:

• Designed for analysis of particulate or microbiological contamination
• For flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubing

Filtration assembly with standard taper 40/35 joint connection:

• Recommended for routine filtration of organic solvents, corrosive liquids and the removal of particulates from HPLC solvents
• Ground glass connection eliminates phthalate contamination that can occur from silicone or neoprene stoppers
• Drip tip on the support bases extends below the hose connection preventing filtrate from entering the vacuum line
• For flasks with a No.2 hose connection for 1/4" (6mm) I.D. tubing

Filtration assembly with GL45 thread connection:

• Designed to collect the filtrate directly into a standard laboratory bottle
• Connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ring

Designed to filter viscous or proteinaceous solutions or produce an ultra clean filtrate.

Includes a 316 stainless steel support with 120 mesh screen, PTFE support screen gasket, support base and graduated funnel.

Accessories Compnent parts for Filtering apparatus with stainless steel support

The indispensable tool for your laboratory. The sophisticated multi-purpose design of the glass filter holder makes it suitable for a variety of applications. To meet your specific application requirements, the holder is available in three different materials.

Single-use, disposable filter units for sterile filtration of media and other reagents, and for other highly sensitive cell culture lines. With polystyrene (PS) upper and lower chambers and nylon membrane. Colour code: red. For cell culture. Gamma-irradiated sterile. Extremely low in extractable substances, no wetting agents. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.

Alternative Filter units Nalgene™ Rapid-Flow™, SFCA Membrane, sterile Alternative Filter Units, Cellulose Nitrate Membrane, sterile Alternative Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile

Microsart^® @filter 100 and 250 filter units are a sterile and ready-to-use combination of funnel made of PP with 47 mm diameter, filter base and gridded membrane in one unit. They have been specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. The membrane filters can also be used in conjunction with Sartorius Stedim Biotech nutrient board discs.

With this dispenser you can choose between three operating modes. Operation by push button, sensor or foot switch. With the model 16713----BO (Art no. 6.289 058), wireless operation is also possible only with battery.

• Capacity for up to 250 membrane filters
• Cleaning with standard disinfectants possible
• Low weight and convenient handle for easy transport

Milliflex® cassettes for the pharmaceutical and cosmetics industry. As a liquid or agar culture medium, it is the product of choice for convenient, fast and reliable bioburden testing. A wide range of ready-to-use, pre-filled cassettes is available.
These are manufactured and QC tested according to the requirements of the pharmaceutical industry.

A lightweight, wireless pipette filler that allows longer and fatigue-free pipetting. For use with graduated and volumetric serological pipettes made of glass or plastic. Separate control of aspirating and dispensing speeds allows precise control of pipetting speeds and reduces the risk of overpipetting for smaller pipettes and volumes.

• Separate switches for aspiration and dispensing
• Large backlit LCD display with indication of remaining battery life and speed settings
• 8 speed levels
• Quick charge function (fully charged after 3 hours)
• Individual labelling field
• Suitable for wall mounting or table stand
• With pipette adapter for the use of 1 ml pipettes

Scope of delivery: S1 pipette filler, universal charger, table stand, holder for wall mounting, 1 ml pipette tray, operating instructions and warranty card

Specifications
Membrane filters:	0.45 µm standard
Capacity:	1 ... 100 ml
Weight:	220 g
Accu:	Rechargeable Li-Ion battery, 20 h continous operation
Power supply:	100 ... 240 V, 60-50 Hz

Sartolab^® P20: for sterile filtration of cell culture media. Ready-to-use, disposable filtration units. Surfactant-free, 0.2µm cellulose acetate membrane (SFCA) with minimal protein adsorption. With Luer lock inlet and filling bell on the outlet.
Sartolab^® P20 plus: with additional, binding agent-free, glass-fibre (GF) pre-filter for media which are difficult to filter.

Accessories Accessories for pressure filtration units Sartolab® P20 / plus

Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL45 screw connection for all standard bottles.
Caution: Only use sterile bottles authorised for use in low pressure applications.

Accessories

Filter units with receiver for sterile filtration of aqueous solutions and media, particularly cell culture. Simple and safe to handle. The integral polyethersulfone (PES) membrane guarantees extremely good throughput times and low protein binding, making it ideal for filtering proteinaceous solutions. The receiver is supplied with a flexible vacuum tubing adapter (for sterile versions only) and a lid.

Alternative

Made of stainless steel, funnel volume 500ml. Connection to faucet creates a vacuum and thereby accelerates the filtration.

Included in delivery:

• 1 x Filtering funnel
• 1 x Filter sieve, diam. 28 mm
• 3 x Gaskets
• 1 x Water jet pump
• 1 x PVC tubing, diam. 10/14mm, length 2m

Combisart^®Multibranch System with modular structure: For microbiological analysis. Basic system without outlet for holding all dismountable Sartorius vacuum funnels either completely or by using appropriate adapters

Accessories Accessories for Filter Manifold system Combisart® Accessories Biosart®100 monitors Alternative Filter holders, vacuum, Type 162. Stainless steel

Without any filtrate transfer, you can filter into a 50 ml centrifuge tube with the Steriflip® filter unit. Simply screw the filter unit onto your centrifuge tube, tilt it 180 degrees and apply vacuum. The second tube, which is attached to the filter unit, now contains your sterile filtrate.

For fast and uncomplicated sterile filtration of aqueous solutions in bottles with narrow or wide threads, the Steritop™ bottle top filter with large filter surface is ideal. Inside the funnel there is a small tab with which you can securely attach a separately available pre-filter during filtration. In order to provide optimum protection against contamination, the thread of the bottle cap is slightly set back.

• Fast flow rates and low protein binding
• Gamma sterilized
• Click-seal closure signals correct closure
• Quick Release: unscrewing the bottle with only a quarter turn
• Easier labeling due to frosted writing surface/bright cap color