Syringe filters

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process.

Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids . Protection against the risk of chemical contamination.

Mini-Spike^® Chemo

• With integrated 0.2 µm ventilation filter
• With integrated 5 µm particle filter
• With snap cap

Mini-Spike^® Chemo V

• possesses an integrated two way valve which protects against free-flow when the system is turned upside down.

Mini-Spike^® Chemo with micro tip

• offers a thinner spike to perforate smaller vials to prevent small rubber stoppers from being pushed into the vial.

Mini-Spike^® 2
Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids from containers

• Protection against the risk of chemical contamination
• Integrated air vent making over-pressure release techniques unnecessary

Applications:
Filtration of aqueous samples with the regulation of COD, TOC, DOC.
Properties:
Low blank value, due to pre-rinsed, hydrophilic cellulose acetate membrane.

The filter is suitable for food products and it reliably retains particles and microbes reliably. It can be steam sterilized or autoclaved separately. The air inlet and outlet openings are configured to ensure optimum flow. The integrated splash guard prevents premature blockage of the membrane.

• DIN 11.851
• Retention rating 0,2 µm, nominal
• Height 80 mm
• Outer diameter 110 mm

Alternative Membrane filters, Cellulose mixed ester Alternative Syringe Filters, Mixed Cellulose Esters (MCE)