Syringe filters

Filter

 Millex® Syringe filter, PTFE, 25 mm

Millipore

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process....

 Millex® Syringe filter, PVDF, 13 mm

Millipore

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process....

 Accessories Chemically-resistant Diaphragm Dosing Pumps SIMDOS®

KNF

...

 Compressor for Mini-UniPrep™ syringeless filters

Cytiva

The compressor can process up to 8 samples at any one time, further improving sample processing time....

 Disposable Filtration Capsules, Hepa-Cap

Cytiva

Laminated hydrophobic glass microfibre filter. Ideal for the sterilisation of large volumes of air at low pressure. Available in two sizes, depending on the volume of air or gas to be filtered. Non-sterile, separately available. Autoclavable.

  • Maximum operating pressure 4.1 bar
  • Wide range of chemical compatibility
  • High loading capacity and high through-put filtration media
  • 99.97% of particles of 0.3µm or larger are retained
  • Autoclavable at up to 132 °C for one hour
  • Connectors: stepped barb (SB) and female national pipe thread (FNPT)
...

 In-line filters Midisart® 2000

Sartorius

For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure).

  • Stepped horse-barb of 6-12 mm on either sides
  • sterile single packed filters, autoclavable
...

 Microlitre syringes, 1000 series, with TLL/ TLLX and gas tight

Hamilton Bonaduz

Glass barrel with PTFE-coated plunger and seal, and Luer lock outlet (TLL). With UNC female thread. Allows attachment to drive arm mechanisms, e.g. Microlab 500 Series diluters/dispensers. Gas-tight microlitre syringe without needle. TLLX= Plunger stop fitted to prevent damage to the PTFE seal. Prevents the plunger tip from reaching the end of the syringe....

 Millex® Syringe filter, PTFE, 13 mm

Millipore

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process....

 Millex® Syringe filter, PTFE, 4 mm

Millipore

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process....

 Millex® Syringe filter, Nylon, 13 mm

Millipore

The Millex® Syringe Filter has been specially manufactured for sterilization or clarification of biological solutions. To increase throughput and flow rate, the filter has a larger filtration surface. This also reduces the pressure required to emtpy the syringe. The filters are provided with a quality certification because they are manufactured under a controlled environment and an automated process....

Add to shopping cart