Laboratory thermometers

Stable support for clamping test tubes, thermometers, pH electrodes and other laboratory instruments onto laboratory containers (e.g. beakers). Extensive chemical resistance, with strong flexible foam rubber plate perforated with 5 apertures of varying diameters. Metal components are corrosion-resistant. Applicable from -40 °C to 120 °C.

Alternative Thermometer holder, PP

Self-adhesive, temperature-sensitive films that respond to certain temperature increases by changing colour. If the respective temperature is exceeded, the corresponding field changes colour permanently within 2-3 seconds. For monitoring products or processes where a certain maximum temperature should not be exceeded.

Specifications
Dimensions:	diam. 15 mm
Storing conditions:	max. 25 °C (storage in freezer recommended)

10-step irreversible temperature measuring strips.
Dimensions: 51 x 18 mm.

Digital thermometer with extra large LCD.

• measurement of a second temperature (e.g. outside temperature) via cable
• high and low values with manual reset
• to hang or place (with fold-out stand)
• cable length approx. 300 cm

Specifications
Temperature measuring range indoor/outdoor:	-10 … 50 °C / -50 … 70 °C
Dimensions:	102 x 21(50) x 110 mm
Weight:	147 g
Power supply:	1 x 1,5 V AAA (Micro)

Alternative LLG-Min./Max. Thermometer with outdoor sensor

Digital thermometer with temperature alarm and waterproof outdoor sensor.

• Two-tier LCD, max./min. temperature, switchable to °F
• Indoor/outdoor measuring temperature range: -10 to 50 °C / -50 to 70 °C
• Display resolution: 0.1 °C
• Accuracy: ±1 °C (0 to 50 °C), otherwise ±2 °C
• Dimensions: 70 x 20 x 110 mm
• Weight: 90 g (only device)
• Incl. battery: 1 x 1.5 V AAA
• Cable length: approx. 290 cm

Alternative LLG-Min./Max. Thermometer with outdoor sensor Alternative Digital Min/Max Thermometer with sensor

For safe storage of laboratory thermometers.

Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX & Hold function. For control measurements in laboratories, food sector, storage and incoming goods. For temperature determination of air, liquids, plastic substances and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.

• Probes made of stainless steel, for temperatures up to +400 °C
• Accuracy: exceeds DIN IEC 584, class 1

Specifications:
Measurement range TFX 410-1 / TFX 420:	-50 ... +300 °C / -50 ... +400 °C
Accuracy:	±0.3 °C
Resolution:	0.1 °C
Sensor: Housing material: Certificate:	Pt 1000 (connection Lemo size 0) ABS 3-point factory calibration
Operating temperature: Storage temperature:	-25 °C to +50 °C -30 °C to +70 °C
Automatic switch-off:	After 2 hours, optional
Dimensions (L x W x H):	54 x 22 x 109 mm (without probe)
Weight:	Approximately 90 g
Power supply: Battery lifetime:	3.0 V Lithium, replaceable Approximately 5 years
IP code:	IP 67

For monitoring of cooling and tempering devices.

• Thermometers mounted in unbreakable plastic bottles filled with a special medium
• With attached magnets for easy wall or door mounting
• Traceable to international standards
• Serial number

1) DAkkS calibration certificate with 1 check point
2) DAkkS calibration certificate with 2 check points
3) DAkkS calibration certificate with 3 check points

Alternative

Glass, solid stem, white backed. Environmentally friendly thermometer, with blue filling. With serial number and certificate (conformity and accuracy). Single packed in plastic square shucks.

Well Scoop Thermometer and Tank Thermometer in brass armour, scooping vessel 70 x 32 mm, thermometer with milk glass scale, calibratable, red filling, capillary blue reflecting.

Accessories Replacement Thermometers for Well Scoop Thermometers