Filter paper, qualitative

Slow < 2 µm. Blue ribbon.

• for very fine precipitates and small particles
• for soil analysis
• for BaSO₄ (hot precipitate), PbSo₄, Cu₂O, ZnS, NiS
• Weight: 84 g/m²
• Thickness: 0.16 mm

CHROMAFIL^® syringe filters are used for filtration of suspended matter from liquid samples. HPLC-Certification available on the internet
Polypropylene housing
Better solvent stability compared to acrylate and polystyrene filters
Shells ultrasonically sealed, not glued
No extractable components from glues
Filtration in both directions possible, the liquid cannot bypass the membranes
Luer lock on side of entry
Safe connection on the "high pressure" side
Luer exit
Standard luer for 3mm and 25mm filters, minispike luer with low dead volume and small OD for 15mm filters
Deflector
The stream of liquid is broken and distributed, and does not directly hit the membrane: this prevents rupture of the membrane
Star-shaped distribution device
The liquid is evenly distributed to the whole membrane surface: this results in a better utilisation of the total area; the filter is not rapidly clogged up; high flow efficiency
Colour coded
Filters with 0.2µm pores have a yellow upper housing, for filters with 0.45µm pores this is colourless; the different membrane types are distinguished by different colours
Low dead volume
~80µl for 25mm, 35µl for 15mm, 5µl for 3mm.

Specifications
The membrane housing consists of polypropylene (PP). This material is very resistant towards most solvents and has a very low extractable substances content. Thus it can be used with almost all solvents, acids and bases (see table). The especially thick rim of the housing is ideal for use with laboratory robots (e.g. Benchmate™). Filter inlet and filter outlet can be fitted to the CHROMABOND^® columns for selective sample preparation with the aid of a special adaptor. All filters can be autoclaved at 121°C and 1.1bar for 30min.

Chromafil™Xtra:
Labelled for method validation and certification. Colour-free plain polypropylene housing. Imprint for direct identification of the membrane type, diameter and pore size.
A hydrophobic membrane. Ideal for filtration of non-polar liquids and gases. It is very resistant to various solvents as well as acids and bases. By flushing with alcohol, followed by water, the original hydrophobic membrane can be made more hydrophilic.

SEPARA integrates in one single device auto-sampler vial, filtration membrane, plunger, and cap/septa. The single step filtering process is efficient and saves time. Fast and simple to use. Reducing sample loss. After filtration the sample is ready to use in most standard autosampler. The pre-slit cap ensures easy and clean transfer of sample. 5 different septa material, PP vial with Ø 12 x 33 mm, Filtering capacity 0.48 ml, dead volume <30 µl, maximum operating temperature 50 °C

The strips remove excess liquids on microscope slides and thus dry quickly, cleanly and easily stained specimens for microscopy. 1 block = 50 strips.

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Filter papers in a flat, quadrant folded format to fit conical filter funnels. Easy and time-saving handling for analyses with high sample throughput.

Wet strength. Suitable for analytical purposes, general laboratory work and for pressure and vacuum filtration.

Smooth. For analytical and technical purposes, such as clarification, analytical sample preparation and particle analysis.

Thick filter card. Fast.
For technical application which range from the filtration of beverages to the purification of electroplating baths.

• Material: Cellulose
• High wet strength
• High flow rate
• Retains medium to coarse particles
• Particle retention from 8 to 15 µm
• Filtration speed 27.5 sec.

Recommended for identification of substances, clarification of liquids and for the preparation of samples in a broad range of chemical analysis.

• Creped filter papers have a particularly large surface area and correspondingly shorter filtration times
• For quick separation of large particles
• For reliable clarification of viscous liquids

Recommended for filtration of fine precipitates used for further analysis according to Kjeldahl. Extremely low content of nitrogen, approx. 0.05 mg / 110 mm disc.

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Highly pure filter paper (approx. 0.08% ash) recommended for precise identification of materials and for sample preparation prior to sensitive detection methods. These filter papers are perfectly qualified for food control according to LFBG paragraph 64 para. 1 and 2, beverage analysis and environmental monitoring.

• Made of the same raw materials (super-refined cotton linters and cellulose) like quantitative filter papers
• High stability and durability due to alpha-Cellulose content above 95%

Creped, medium-fast filtration, for general applications.

Recommended for identification of substances, clarification of liquids and for the preparation of samples in a broad range of chemical analysis.

• Creped filter papers have a particularly large surface area and correspondingly shorter filtration times
• For quick separation of large particles
• For reliable clarification of viscous liquids

Recommended for identification of substances, clarification of liquids and for the preparation of samples in a broad range of chemical analysis.

• Creped filter papers have a particularly large surface area and correspondingly shorter filtration times
• For quick separation of large particles
• For reliable clarification of viscous liquids

These glass microfiber filters are made from borosilicate glass and strengthened with an organic binder to provide high mechanical stability.

• Temperature resistance up to 180 °C
• Medium filtration speed
• Can be used as a roll filter in automated applications

High wet strength.