Burners

Bunsen burner with needle valve DIN (NG-2411 BO0031).

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burners with air regulator and needle valve

Bunsen burner with needle valve and pilot flame DIN (NG-2411 BO0031).

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burners with air regulator and needle valve

Bunsen burner with stopcock and pilot flame DIN (NG-2411 BO0032)

Accessories Gas cartridge Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Alternative Bunsen burners with air regulator and needle valve

DIN 30665. Air regulation, spar flame.

Accessories Gas safety tubing, rubber Accessories Safety gas hoses, rubber, without reinforcement Accessories Gas lighter Accessories Piezoelectric gas lighter, Clipper Accessories Accessories for Bunsen and Teclu burners Alternative Bunsen burners with air regulator and needle valve

Electrothermal"s Electric Bunsen, combines the advantages of a regular gas burner with the clean, easy operation of their Electromantles. The Electric Bunsen is ideal for non-contact heating of test tubes, crucibles, small flasks and beakers, regardless of their shape.

• Conical shaped heating element directs radiant heat to the top cavity
• Top cowl deflects heat away from your hand
• Air circulation from the vented housing keeps the base cool enough to hold during operation
• Corrosion-resistant

Specifications
Power consumption:	400W
Dimensions (diam. x H):	120 x 177mm
Weight:	0.5kg
Temperture range:	800 to 1000°C

With heart screw.

Alternative Hook connector

Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.

• Heats up quickly, constant heating
• No open flames, no soot, odourless
• Integral continuous electronic power adjustment between 0% and 100%
• Casing safe to touch even when hot
• Built-in casing handles for safe transport
• Inert ceramic, long-life heating element
• Built-in overheat monitor
• Protection of electrical components against spilled liquids
• Additional side safety shield on burner element
• Includes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod

Specifications:
Connector:	800W / 230V
Dimensions (W x D x H):	150 x 150 x 170mm
Weight:	approx. 2.5kg
Max. temperature:	900°C
Heated area:	100 x 100mm

Accessories  Alternative Infrared burner, PowerCube IRB1

The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.

Advantages:

• Particularly safe as no open flame is used
• Stable thanks to practical cube shape. The casing itself only gets slightly hot in use
• Accelerated heating-up rate in comparison with other electrical heating devices
• Heating element sealed in ceramic, therefore insensitive to external influences (spillages)
• Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°C

Specifications:
Heating power:	250 W
Overall (W x D x H):	100 x 105 x 105 mm
Weight:	approx. 700 g
Max. temperature:	700 °C
Heated area:	60 x 60 mm

Accessories Accessories for Infra-red burner, PowerCube IRB1 Accessories  Alternative Infrared burner PowerCube IRB2

Sterilisation with light. Sterilisation of inoculating loops, tweezers and small instruments within seconds.

• Sturdy and maintenance-free
• No gas, no open flame - Works with standard electrical power
• Intuitive, easy to use
• Instant, ready-to-use, no warm-up time, no waiting
• Sterilization temperature: 900 to 1300°C
• Touch-free START, with IR- sensor and adjustable timer (5 to 7 seconds)
• For use in Laminar Flow Cabinets
• Ideal for mobile operation in the field

The schuett solaris is the perfect solution if an open flame should be avoided or gas cartridges etc. are not available. Used with standard electrical power. Reaches the safe working temperature of 900 to 1300°C within a split second. No excess heat, no energy consumption between work cycles. START is generated by an infra-red sensor, which allows for efficient one-handed operation. Pathogenic material is kept inside the sterilization chamber. No spreading, no splashing. Working angle adjustment (4-steps).

Scope of supply: schuett solaris inoculation loop sterilizer, 2 x quartz glass tubes, 1 x inoculation loop holder with inoculation loop (sample)

Specifications
Dimensions (W x D x H):	152 x 195 x 210mm
Weight:	approx. 2500g

With stopcock. Air regulation, max. 1300°C. An anti-slip rubber coating under the base ensures absolute stability.