Electrodes and accessories for oxygen determination

Sensor for polarographic oxygen measurement with high accuracy and repeatability. For use in laboratory, field and industry. Robust construction. Diaphragm mechanically protected by steel mesh, shaft made of glass-fibre reinforced PPS. With integrated temperature sensor.

• InLab^® oxygen sensors are designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 6 meters
• InLab^®-ISM oxygen sensors are equipped with Intelligent Sensor Management, which enables simple calibration in the air and permanent monitoring of the sensor status

Designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 68 dual-channel instruments.

Specifications
Sensor type:	Polarographic sensor
Measuring range oxygen:	0 ... 200 % / 0 ... 20 mg/l
Measuring range temperature:	0... 60 °C
Connections:	BNC (IP 67) / Cinch (RCA)
Shaft diameter:	12 mm
Shaft length.	120 mm

All Blaubrand^® volumetric flasks are delivered with batch number and one batch certificate included per pack. They are also available with individual certificates or DAkkS calibration certificate upon request.

• DIN EN ISO 1042
• DE-M marking
• Graduation and inscriptions in highly contrasting blue enamel
• Calibrated to contain (IN)

Wireless module for connecting to MultiLine^® 3310/3510/36x0 IDS, inoLab^® Multi IDS and MonoLine. Connects up to three sensors at the same time (depends on meter capabilities). Also for operation of OxiTop^®-IDS.

Flow vessels for conductivity measuring cells for applications to prevent air from entering or measurements in closed circuits. Flow vessels for conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

D 3Sen: Designed for everybody who has to perform flow-through measurements in the field, i.e. ground water pumping tests. It consists of a rugged flow-through vessel in holder and a tripod , also suitable for pole mounting. With hose fittings for standard hoses with a diameter of 3/4" (19 mm). Three places are available for pH/ORP, conductivity and dissolved oxygen sensors (CellOx/FDO). Including mounting accessories.

Accessories Accessories for Oxi

Sensor-specific vessels to test, calibrate and store dissolved oxygen sensors (galvanized and optical).

• Easy handling
• Standard conform calibration
• Perfect transport protection

Accessories Accessories for Oxi

Optical DO-probes with cable, incl. bottle for storage and calibration and Micro SD card with calibration data.
Maintenance Kit consists of membrane cap and Micro SD card with software and calibration data.

Accessories Galvanic Dissolved Oxygen Sensor CellOx® 325

710: 4 platinum poles
720 + 751-4 + 752-6: 2 platinum poles
731 + 738: 4 graphite poles
741 + 742: 2 steel poles
ISM^® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip.

All Conductivity sensors with integrated probe sensor (NTC 30 kΩ), shaft length 120 mm, schaft diameter 12 mm, only type 751-4 has diam. 4 mm and 752-6 diam. 6 mm.