Şırınga pompaları

The simple and easy to use Legacy^® pumps are a high value solution for delivering precise and smooth flow in research and production applications. The KDS 100 pump gives customers the most cost effective solution for infusing fluids. Alternatively, the KDS 200 gives advanced features with RS232 and TTL interfaces and can be daisy chained together to create a pumping network. KDS 220 holds up to 10 syringes.

• Vibration Elimination System
• Flow Direction Indicator
• Fast Forward/Reverse
• Power Recovery Diagnostics
• Syringe Library
• Flow Rate Selection
• Volume Dispense Mode
• Direct Entry Syringe Diameter
• Optional: Foot Pedal Interface, NIST Certificate, Alarm

KDS 100 Single-Syringe Infusion Pump: Economical pump combining precision flow with outstanding ease-of-use and exceptional durability.
KDS 101 Two-Syringe Nanoliter Pump: For microdialysis and similar applications which require virtually pulseless flow at very low flow rates.
KDS 200 Two-Syringe Infusion Pump: Programmable pump for daisy chain connection. Feature-laden and with a broad speed range and a wide range of syringe sizes it meets the requirements of most laboratory applications.
KDS 220 Multi-Syringe Infusion Pump: For applications requiring multiple syringes. This pump has been modified to hold up to 10 syringes.

Alternative Syringe Pumps Legato®

The Legato^® series syringe pumps provide the smoothest most accurate flow available. The intuitive, chemically resistant touch screen enables the user to quickly create configurations and recall them for ease of use. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent).

• Single and dual syringe infuse, infuse withdraw & continuous models
• Holds syringe sizes from 0.5ul to 140 ml (Model dependent)
• Flow rates down to the picoliter/min (Model dependent)
• Programmable interface without the need for a PC (Model dependent)
• USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato^® 200 Series Only)
• Rugged construction with cold rolled steel chassis

Applications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic Injections

Legato^® 100 Single Syringe Infusion Pump: This pump is ideal for applications where a single syringe is used.
Legato^® 101 Dual Syringe Nanoliter Pump: This infusion only pump is ideal for applications where dual syringes are required with small volumes under 10ml.
Legato^® 111 Dual Syringe Nanoliter Pump: Based on the Legato^® 101 model, suitable for infusion and withdrawal of liquids.
Includes multi-mode operations and multi-step programs.
Legato^® 110 Single Syringe Infusion/Withdraw Pump: The Legato^® 110 is based on the Legato^® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation.
Legato^® 110 DRS Dual syringe pump combination: Two Legato^® 110 pumps connected by an input/output cable. Both pumps can be started synchronously and operated at different flow rates.
Legato^® 180 Dual Syringe Picoliter Infusion/Withdraw Pump: For low flow with program options for 2 programs. 50 steps each. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Legato^® 185 Single Syringe Infusion/Withdraw Pump: It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation. Minimum flow rate only 0.54 pl/min.
Legato^® 200 Dual Syringe Infusion Pump: This unit supports infuse only. User definable flow rates with selectable target volumes or time values to control the total infusion volume.
Legato^® 210 Dual Syringe Infusion/Withdraw Pump: This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes.
Legato^® 210P Dual Syringe Infusion/Withdraw Pump: as Legato^® 210, features additional multi-step programming with user defined configurations/programs of up to 1000 steps. Up to 40 programs of 25 steps each can be stored in memory.
Legato^® 270P Dual Push/Pull Syringe Pump: as Legato^® 210, features additional user defined configurations/programs of up to 800 steps. Up to 40 programs of 20 steps each step can be stored in memory.

• Luer Lock fitting enables compatibility to all pump syringes
• Pressure proof up to 2 Bar
• Type Standard is available in different lengths
• Type Opaque (black) offers light protection
• Centric Luer Lock cone

3-piece syringe for infusion pump

• Made of Polypropylene
• Plunger stopper with double sealing ring for slow aspiration
• High contrast graduation, permanent marking
• Centric Luer Lock cone
• Reduced residual volume
• natural latex-free

Accessories Microlab® 700 Series

Verdünnung/Dispensierung mit einer Genauigkeit von über 99 %, unabhängig von der Viskosität einer Flüssigkeit, dem Dampfdruck und der Temperatur.
Der Microlab® 700 Diluter/Dispenser ist eine hochpräzise Spritzenpumpe mit grafischer Bedienoberfläche, mit der Volumen von 10 μl bis 50 ml schnell und leicht verdünnt und abgegeben werden können.
Erhältlich als System mit einer oder zwei Spritzen und mit Advanced Controller oder Premium Controller.

Die Software bietet eine Vielzahl von Sicherheits Schutzmaßnahmen:

• Vereinfacht die Einhaltung der FDA GXP Vorschriften
• Fähigkeit zur Verwaltung von Benutzerkonten und Passwörtern
• Erstellen von Logdateien Konform mit 21 CFR Part 11
• Verwaltung von Protokolldateien auf einem PC mit der LyncStore-Anwendung ausschließlich für die Premiumversion.

Drucker-Set optional erhältlich

Merkmale der Spritzenpumpe

• Ventilmotor mit hohem Drehmoment
• Präzisions-Spritzenantriebe mit einer Schrittauflösung von 48.000 über 60 Millimeter
• Beleuchtete Ein-/Aus-Schalter und Taste „Vorpumpen“
• Unabhängige linke und rechte Trigger-Ports
• Lüfterloser Wärmeabzug
• 24 V-Leistungsaufnahme
• CAN Daisy Chain-Eingang/-Ausgang
• RS-232 -Konsolenanschluss
• Power over Ethernet (PoE)
• TTL-Eingang/Ausgang

Zwei-Spritzen-Diluter

• Erzeugt eine Verdünnung von bis zu 1:50,000 in einem Schritt
• Reduziert Vorbereitungszeit und Pufferverschwendung
• Spült Schläuche zwischen jeder Probe

Spezifikationen
Genauigkeit:	±1 %
Präzision:	±0,2 %
Flussrate:	0,003-6000 μL/Sekunde (abhängig von Spritzengröße)
Kompatible Spritzen:	10, 25, 50, 100, 250, 500 μl,1, 2,5, 5, 10, 25 und 50 ml BFP-Spritzen
Volumenbereich:	1,0 μl bis 50 ml
Abmessungen:	177,8 x 139,7 x 266,7 mm
Gewicht:	5.9 kg
Stromversorgung:	100-240 V, 50-60 Hz

Accessories Zubehör für Microlab® 700 Serie