Vortexer

Compact vortexer with brushless motor and infinitely variable speed control up to 4200 rpm for optimal mixing results. The digital display alternately shows the set speed and time.

• Programmable Pulse mode
• 3-way switch (on/off/touch)
• Timer adjustable from 1 min up to 999 min

Compact test tube shaker with outstanding price-performance ratio and new, improved design.
Ideal for mixing small sample volumes in vessels up to 30 mm diameter.

• Touch function for short-time operation
• Adjustable speed control for excellent mixing results
• Suction cups ensure a secure hold during vortexing
• Extremely small footprint

The attachments enable vigorous mixing of samples. Vessels are fixed vertically.

Robust and reliable shakers for speedy mixing and shaking of samples. Multiple accessories: e.g. attachments for test tubes, beakers, centrifuge tubes etc. Attachments can be changed easily with the snap fit system.

• Tough metal housing
• Touch or hands-free mode possible
• Can be used in cold rooms and incubators

Test tube shaker with infinitely adjustable speed range. Specially for mixing small sample volumes with touch function.

Vortex shaker especially for short time operation (Touch function) or continuous operation.

Replacement rubber cover with nubs for shaker platform (Ø 76 mm).

Inexpensive, compact test tube vortex shaker. Designed for mixing small test samples by touch function.

• Small, compact and reliable
• For small containers up to 30mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes
• Fixed speed (2800rpm)
• Excellent mixing
• Top of housing and the test tube accessories are made from chemically inert plastic. The bottom section is a coated, zinc die-casting.
• Includes lightweight 12V mains adapter

Replacement shaker platform with rubber cover for shaking and mixing beakers, flasks, and tubes.

Vortex shaker suitable for intermittent operation (touch function), activated by pressing shaker attachment, or for continuous operation.

• Wide speed range, infinitely adjustable
• Versatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates, 250ml Erlenmeyer flasks etc.), please order separately
• Attachments securely click onto shaker in any position
• Strap clamp (VG3.36) ensures easy holding of round/Erlenmeyer flasks
• Sturdy, die cast zinc casing
• Stable at high speeds due to special feet (silicone base with ultra-high vibration damping)
• Eccentric drive with ball bearings
• Self-ventilated motor allows continuous operation with minimal warm-up of the housing

Compact, universal small shaker suitable for shaking tasks with all small vessels and microtitre plates.

Two operating modes:
Mode A (safe mode with attachment detection): The maximum speed of 3000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1300 rpm.
Mode B (without attachment detection): A speed of 3000 rpm is possible with all attachments, depending on the application.

• Wide range of attachments
• Attachment detection
• Stable in all speed ranges
• Sturdy zinc die cast casing
• Continuous or touch operation (with standard attachment)

Ideal for mixing samples in Eppendorf tubes, vials and similar vessels of different diameters at extremely high speed rates. The strong 5 mm vibration orbit yields the best results even with high viscosity media or solids out of solution and quickly gives a smooth and even dispersion. Short time and continuous mode.
-Features an analog dial speed control, no settings of specified rpm numbers


Scope of supply: Test tube shaker incl. attachment diam. 20 mm

Optional attachment for vessels up to 50 mm available.

To attach the microtube holder to the Genie^® series vortexers, the TurboMix™ attachment is required. Please order separately.

In combination with foam inserts, suitable for shaking and mixing samples in reaction vessels or microtitre plates.

Please order foam inserts separately.

The attachments enable vigorous mixing of samples. Vessels are fixed horizontally.

For use with the shaker platform. Ideal for shaking and mixing samples in reaction vessels or microtitre plates.

Please order shaker platform separately.

With low profile and small footprint for gentle mixing to vigorous re-suspension of cell or chemical pellets.

• variable speed: 750rpm to 3000rpm
• continuous or touch operation
• for tubes up to 28.5 mm (50 ml) diameter

Pulsing model features a unique pulse action that reduces heat generation, while providing more effective mixing and cell disruption.

• Auto/Standby/On Rocker Switch
• LED Displays for Speed/Time
• Up/Down Buttons for Set-Point Control
• Continuous or TOUCH mode operation
• Pulse Button
• Timer from 1 s to 999 min

Analogue model offers variable speed control.

• Auto/Off/On Rocker switch
• Speed knob: variable 1 to 10 dial marks
• Continuous or TOUCH mode operation

Digital model allows input of the exact speed and time to achieve reproducible results.

• Auto/Standby/On Rocker Switch
• LED Displays for Speed/Time
• Up/Down Buttons for Set-Point Control
• Continuous or TOUCH mode operation
• Timer from 1 s to 9999 min

Fixed speed model offers one-touch, high-speed mixing.

• Fixed high speed mixing
• TOUCH mode operation

• Low profile, ergonomic design
• Robust, die-cast housing avoids unnecessary movement during use
• Powerful vortex mixing action, ideal for a range of tubes
• Economic fixed speed model V-100
• Variable speed model V-200 with choice between intermittent or continuous operation
• Integral retort rod fixing
• Range of accessory heads available

Multi-Tube vortexers are ideal for high throughput sample processing. Holds up to 50 samples simultaneuosly. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. Analogue and digital models, both microprocessor-controlled and run in continuous or timed mode.
-Analogue model offers an economical alternative when exact speed/time is not required

• Timer to 60 s

Multi-Tube vortexers are ideal for high throughput sample processing. Holds up to 50 samples simultaneuosly. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. Analogue and digital models, both microprocessor-controlled and run in continuous or timed mode.
-Digital model is ideal for applications that require accuracy and repeatability

• Pulsing mode on digital model to enhance vortexing action
• Timer from 1 s to 9999 min

Compact, universal small shaker suitable for shaking tasks with all small vessels and microtitre plates.

Two operating modes:
Mode A (safe mode with attachment detection): The maximum speed of 3000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1300 rpm.
Mode B (without attachment detection): A speed of 3000 rpm is possible with all attachments, depending on the application.

• Wide range of attachments
• Attachment detection
• Stable in all speed ranges
• Sturdy zinc die cast casing
• Continuous or touch operation (with standard attachment)

Robust and reliable shaking device for mixing and shaking of samples in Erlenmeyer flasks, vials, tubes, beakers, or microplates.

• Digital display for speed and time
• Robust metal case
• Secure stand at high speed thanks to supports with high vibration damping
• Can be loaded with e. g. max. 6 Erlenmeyer flasks 250 ml or 2 multi racks each for 12 test tubes (max. tube diameter 29 mm)
• Timer from 1 to 99 min

Attachment for test tube inserts.

Test tube inserts for basic holder VX 11.

Versatile Test tube shaker with 3 mm vibration orbit, accomplishes excellent results especially in large vessels. The Multi Reax allows for rigid to smooth dispersion of viscous media and solids.

• Short term and continuous run
• Stepless speed adjustment
• Digital display
• Timer function allows for unattended operation and can be set from 1 to 999 minutes. With acoustic alarm when the operation stops.

• Attachment for 26 vessels with diameters from 10 mm to 16 mm
• Attachment for 12 vessels with diameters from 16 mm to 32 mm

Ideal for mixing samples in Eppendorf tubes, vials and similar vessels of different diameters at extremely high speed rates. The strong 5 mm vibration orbit yields the best results even with high viscosity media or solids out of solution and quickly gives a smooth and even dispersion. Short time and continuous mode.
-Features analog dial speed control with accurate rpm numbers setting

• Electronic speed control provides constant rpm output even at very low speed and under changing loads
• Precise speed control with settings of specified rpm numbers

Digital vortex mixer with patented IR sensor for sample recognition: the shaking process starts automatically when the sample tube approaches the mixing cup head. This enables fatigue-free working, as the sample doesn't have to be pressed on the device.

• For IR sensor and continuous operation
• Electronic speed control
• Adjustable shaking speeds up to 3000 min^-1
• Very good chemical resistance
• With timer (up to 999 minutes 59 seconds)
• Large, bright LCD display

For use with the recessed platform. Ideal for shaking and mixing several test tubes with different diameters.

Please order recessed platform separately.

Sample set for shaking and mixing beakers, flasks, and test tubes with different diameters.

Scope of supply: Recessed platform, elastic bands, foam insert for 12 x Ø 9 to 16 mm test tubes, foam insert for 8 x Ø 14 to 29 mm test tubes, foam insert for 4 x Ø 29 to 37 mm test tubes, blank foam insert

In combination with foam inserts, suitable for shaking and mixing several test tubes with different diameters.

Please order foam inserts separately.

Starter set for shaking and mixing samples in reaction vessels and microtitre plates.

Scope of supply: Shaker platform (Ø 152 mm), foam insert for 60 reaction vessels, foam insert for 1 microtitre plate

Elastic bands for attaching various sample vessels to the recessed platform. Suitable for microtitre plates, as well as vessels up to 500 ml.

The attachments enable vigorous mixing of samples in tubes or ampoules.

Optoelectronically controlled small shaker with a very wide speed range.

• Suitable for continuous operation
• New design and improved drive system
• Circular shaking motions
• Slow speeds are well maintained
• Attachments are interchangeable

VX 1 one-hand attachment: For shaking single vessels 1 ml to 250 ml
VX 2 test tube attachment: For up to 36 test tubes or centrifugal tubes with a diam.of 16 mm
VX 2E.n "Eppendorf" attachment: For shaking of max. 64 "Eppendorf" tubes (1.5ml)
VX 7 Dish attachment: For mixing of culture bottles, Petri dishes, etc.
VX 8 Universal attachment: For rapid and secure clamping, e.g. 2 Erlenmeyer flasks up to 500 ml

Robust and reliable shakers for speedy mixing and shaking of samples. Multiple accessories: e.g. attachments for test tubes, beakers, centrifuge tubes etc. Attachments can be changed easily with the snap fit system.

• Tough metal housing
• With digital control and display of speed and time
• Timer function: 1 to 99 seconds (touch mode), 1 to 99 minutes (hands-free mode) or continuous
• Can be used in cold rooms and incubators