-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Stirrer Heads
Dissolver stirrers, stainless steel 1.4571
The dissolver stirrers create a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations....
Crescent-shaped stirring rotors, PTFE
The stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrer shaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contact with PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. The stirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily....
Impellers for Overhead Stirrers
Powerful Stirring
Shaft diameter: 8mm
Blade and Half-Moon Impeller
- These impellers are recommended for applications which require an average speed
- For mixing products with average viscosity
- Models BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vessels
Propeller stirring rotors, 3-blade, stainless steel 1.4305
The 3-blade propellers produce axial flow, and reduce shear forces to a minimum, even at high stirring speeds, thanks to their optimised blade design. Recommended for medium to high speed operations.
Other sizes available on request....
Additional Stirrer Blades for Bola Stirrer Shafts, PTFE
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements....
Anchor stirrer, PTFE
The stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrer shaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contact with PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. The stirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily....
Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404
The 4-blade diagonal blade stirring rotor provides axial flow and creates increasing shear forces at higher stirring speeds. Recommended for medium to high speed operations.
Other sizes available on request....
BuddeMix Stirring System 1 - 4
This novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed....
Centrifugal stirring rotors, 2-blade, stainless steel 1.4305
The folding blades of this 2-blade centrifugal stirring rotor open with increasing speed, allowing use with narrow-neck vessels. The stirring effect it provides is similar to a standard diagonal blade stirring rotor. Recommended for medium to high speed operations....
Compressed air industrial stirrers BSR 64 with floor stand
BSR series stirrers perform routine mixing tasks up to 200 l.
General specifications:
- operating pressure max. 6 bar
- air consumption 800 l/min. at 6 bar
- power output 640 W at 6 bar
- clockwise rotation
- ATEX rating to Ex II 2G Ex h IIC T5 Gb
Compressed air powered stirrers, PLR, accessories
Connection couplings VK:
Fixed-diameter connection for motor/magnetic coupling drive shaft and stirring rod. Suitable for use in potentially explosive atmospheres. Material No. 1.4404.
Flexible glass stirring shaft couplings PK:
For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignment of motor and shaft, and evens out axial and height differences. Accepts 6mm to 10mm diameter shafts....
Dissolver stirring rotors, stainless steel 1.4404
The dissolver stirring rotor creates a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations....
Impellers VISCO JET®
The worldwide patented VISCO JET
® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.
- One system for literally all mixing tasks for low to high viscosity media
- Patented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®
- Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beaker
- This technology allows for de-gassing of gels while preventing air intake and foaming
- Reduce process times significantly while performing the best mixing result ever
Paddle stirring rotors, stainless steel
The paddle stirring rotor creates a tangential flow with minimum turbulence. Its design ensures a gentle action on sensitive products and good heat exchange. Recommended for low to medium speed operations.
Other sizes available on request....
PLR compressed air laboratory stirrers up to 30 L for use in potentially explosive atmospheres, without/with tachometer
PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric motor.
General specifications:
- operating pressure max. 6 bar
- air consumption 260 L/min. at 6 bar
- power output 200W at 6 bar
- clockwise rotation
- ATEX certification
Propeller, 3 blades, PTFE
The stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrer shaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contact with PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. The stirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily....
Safety limit switch SI 400
The SI400 consists of an end switch (normally closed contact / switch) and a magnetic switch contact (actuator) which is mounted either on the floor stand R472 with the fixing device SI472 or alternatively on the telescopic stand R474 with the fixing device SI474.
The stirring unit RW47 can only be switched on through the SI400, when the agitator is adjusted to the user-selected height within the mixing vessel....
Stands
Floor stand BS 1 with angled foot, plastic-coated, stand rod Ø 34 x 1000 mm
Floor stand BS 2 with angled foot, plastic-coated, stand rod Ø 34 x 1500 mm
Floor stand BS 3 with angled foot 600 mm, completely made of stainless steel, stand rod Ø 34 x 1000 mm
Wall bracket WS...
Turbine stirring rotors, 3-blade with guide ring, stainless steel 1.4305
The 3-blade turbine stirring rotor produces axial flow; the guide ring surrounding the blades reduces shear forces, and offers protection when contacting the wall or bottom of the vessel. Recommended for medium to high speed operations....
Accessories for Magnetic Stirrers - Heat-On Attachments
These attachments are by far the safest, fastest and most efficient method for heating and mixing solutions in round-bottom flasks from 10 ml to 5L. Heat-On fits precisely to every flask, thus insuring maximum surface contact and fast heat transfer. This eliminates the need for oil as a heat conductor....
PMC 120 compressed air container stirrers for Intermediate Bulk Containers (IBCs) up to 1500 L
Powerful and highly flexible container stirrers designed to be used across industries; compact and lightweight construction, easily detachable.
General specifications:
- operating pressure max. 6 bar
- air consumption 23 L/sec. at 6 bar
- clockwise rotation
- ATEX certification
Stirrer Shafts with One Paddle, PTFE
PTFE-jacketed stainless steel shaft, paddle completely made of PTFE with two 45° angled blades. Universal chemical resistance since the product is only exposed to PTFE. Temperature resistance: from -200 to +250 °C. The product is sucked bottom-up, very good axial flow with low shear force....
Sampler Mole
The soil sampler made from iron consists of 3 parts: a handle with rod, optional extensions and the hardened drill bits. For determining soil properties, moisture
and structure. Extension rods can extend the working depth of the Mole down to 5 m. Individually customisable.
Drill bits for different soil properties:...
Anchor stirrer, AR 19, 5091900000
Heidolph Instruments
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
9816557 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|