Glass cuvettes

LLG-Cuvettes are most frequently used in analytical laboratories.

They have two clear windows, two side walls and are available as optical glass or quartz variants. The walls and the base are polished inside and frosted outside. The thickness of the windows and the base is 1.25 mm. The overall height of standard type cells is 45 mm or 48 mm for those fitted with a stopper. Each cuvette is supplied with a PTFE lid.

• Optical Glass: 335 to 2500 nm
• Quartz: 200 to 2700 nm

Quartz glass High Performance 200 - 2500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE lid
Type B: with small glass lid
Type C: with regular glass lid
Type D: with PTFE stopper / from 40 mm with 2 PTFE stoppers

Accessories Holder for Absorption Cells Alternative Cells for Absorption Measurement, UV-range Alternative Ultra micro cells for absorption measurement, UV-range, quartz glass High Performance

Wavelength Range:	Optical material:
260nm - 2500nm	HOQ 310H (UV)
320 nm - 2500 nm	Special optical glass (OS)
360 nm - 2500 nm	Optical glass (OG)

Wavelength Range: 200 nm - 2500 nm
Optical material: Quartz glass High Performance

Accessories Holder for Cells for Fluorescence Measurement

Special optical glass 320 - 2500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE-Falzdeckel
Type B: with small glass lid
Type C: with regular glass lid

Accessories Holder for Absorption Cells Alternative Cells for Absorption Measurement, UV-range Alternative Ultra micro cells for absorption measurement, UV-range, quartz glass High Performance

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP).
Your benefits:

• High quality of the measurement results
• International comparability of measurement results
• Meeting the requirements of the major pharmacopoeias (EP, DAB, USP)
• Results traceable to NIST primary standards
• 30 years warranty on the reference materials

Scope of delivery:

• Certified reference materials (Calibration Standards) in quality storage box
• DAkkS Calibration Certificate (DIN 17025)
• Handling guidelines

Wavelength Range: 200nm - 2500 nm. Optical material: Quartz glass High Performance

Accessories Holder for Absorption Cells

High precision standard cells for routine analysis. Suitable for most spectral photometers, using rectangular cells. Available with cover or with stopper for a liquid-tight seal. Cover and stopper made of PTFE.

Glass types
Type G: Optical glass, 334 to 2500 nm
Type SOG: Special optical glass, 320 to 2500 nm
Type Q: Spectrosil^® Far UV Quartz glass, 190 to 2700 nm

Specifications
Windows parallel to:	< 3 arcmin
Window polish:	60/40 scratch/dig
Window thickness:	1.25 mm

Quartz glass Extended Range, Wavelength range: 200 - 3500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE lid
Type B: with small glass lid
Type D: with PTFE stopper / from 40 mm with 2 PTFE stoppers

Accessories Holder for Absorption Cells Alternative Cells for Absorption Measurement, UV-range Alternative Ultra micro cells for absorption measurement, UV-range, quartz glass High Performance

Quartz glass High Performance 200 - 2500 nm.
Type A: with PE stopper
Type B: open pipette tips

Accessories Holder for Absorption Cells Alternative Cells for Absorption Measurement, UV-range Alternative Macro cells for absorption measurement, UV-range, quartz glass High Performance

Optical material:
QS: Quartz glass High Performance, wavelength range: 200 - 2500 nm.
OS: Special Optical Glass, wavelength range: 320 - 2500 nm.

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP).
Your benefits:

• High quality of the measurement results
• International comparability of measurement results
• Meeting the requirements of the major pharmacopoeias (EP, DAB, USP)
• Results traceable to NIST primary standards
• 30 years warranty on the reference materials

Scope of delivery:

• Certified reference materials (Calibration Standards) in quality storage box
• DAkkS Calibration Certificate (DIN 17025)
• Handling guidelines

Check the wavelength accuracy

Dust-proof, rigid container for storing clean cells. Accommodates cells up to 55mm in height. Cells are immediately ready for use when required.

Küvibox 1 holds up to 16 x 10mm path length cells
Küvibox 2 holds up to 8 x 10mm and up to 4 x 20mm path length cells.

300 Wavelength Range: 200nm - 3500nm
Optical material: Quartz glass Extended Range

Wavelength: 200nm - 2500nm
Optical material: Quartz glass High Performance

Cells made of optical glass or Borosilicate glass 3.3, 21 mm x 40 mm, for instument Models Fs, PFXi/PFX195, 880, 950 and 995. (Note: PFXi/PFX-195 max. path length 50 mm).

W600/OG/xx for unheated samples (up to 40 °C)
W600/B/xx for heated samples (up to max. 100 °C)

Further versions available on request.

Cells made of optical glass 17 mm x 75 mm, for Comparator 2000+ and Comparator 3000 using unheated samples (up to 40 °C).

Further versions available on request.

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP).
Your benefits:

• High quality of the measurement results
• International comparability of measurement results
• Meeting the requirements of the major pharmacopoeias (EP, DAB, USP)
• Results traceable to NIST primary standards
• 30 years warranty on the reference materials

Scope of delivery:

• Certified reference materials (Calibration Standards) in quality storage box
• DAkkS Calibration Certificate (DIN 17025)
• Handling guidelines

Glass Filters 666-S000: For testing spectrophotometers. Photometric accuracy and wavelength accuracy in the visible spectral region.

Liquid Filters 667.033-UV: For testing spectrophotometers according to European Pharmacopoeia, wavelength accuracy, photometric accuracy, stray light behaviour, resolution.

Wavelength Range: 200nm - 2500nm
Optical material: Quartz glass High Performance

96-well-plates. Quartz glass, with synthetic quartz glass base. Ideal for use with aggressive media, for UV-range measurements, in microscopy, or in fluorescence studies.

Grey. DIN 12871.

PE construction. Practically unbreakable. Glass cuvettes are washed and dried in a few seconds during one operating cycle, using a simple process. All that is required is a filter flask (with pierced rubber bung, 13 mm hole and pressure tubing) and a slight vacuum.

Accessories Filter flasks, glass DURAN® Accessories Vacuum tubing, rubber (NR) Accessories Stoppers, natural rubber, with single hole

Accessories Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II Alternative Micro Volume Analysis TrayCell

Cuvettes for photometric routine and water analytics in the UV-VIS and VIS range. Cells with matt side surface are suitable for the automatic cell detection of the photoLab^® filter and spectral photometer. The glass and quartz cuvettes have a marking in order to place the cuvettes into the photometer in the same direction for an even higher precision.

• Automatic cell detection
• Glass and quartz cells with marking for higher precision
• High quality optical glass for VIS
• High quality quartz glas for UV-VIS

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP).
Your benefits:

• High quality of the measurement results
• International comparability of measurement results
• Meeting the requirements of the major pharmacopoeias (EP, DAB, USP)
• Results traceable to NIST primary standards
• 30 years warranty on the reference materials

Scope of delivery:

• Certified reference materials (Calibration Standards) in quality storage box
• DAkkS Calibration Certificate (DIN 17025)
• Handling guidelines

Check for photometric accuracy

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP).
Your benefits:

• High quality of the measurement results
• International comparability of measurement results
• Meeting the requirements of the major pharmacopoeias (EP, DAB, USP)
• Results traceable to NIST primary standards
• 30 years warranty on the reference materials

Scope of delivery:

• Certified reference materials (Calibration Standards) in quality storage box
• DAkkS Calibration Certificate (DIN 17025)
• Handling guidelines

Check for stray light