Nitrile gloves

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free

The powder-free, blue LABSOLUTE® disposable gloves Protective made of nitrile with a rolled cuff are the best supplement to the LABSOLUTE® Sensitive gloves for a higher protection level.

The silicone-free gloves with an AQL value of 1.5 are textured on the outside and comply with the following standards and directives

• EN 420, EN 421, EN ISO 374-1, -2, -4, -5 and EN 16523-1
• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• UV transmission less than 0.1 % at 360 nm
• Delivered in handy dispenser boxes of 100 (S, M, L) or 90 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.30 mm, palm min. 0.22 mm, cuff min. 0.20 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The powder-free LABSOLUTE® disposable gloves nitrile GREEN are flat with a rolled cuff and offer excellent elasticity and wearing comfort. The gloves have textured finger tips.

They are extremly skin-friendly, because they are free from chlorine and natural rubber proteins. The gloves use less water, energy and carbon dioxide during the production process as similar disposable gloves making these gloves a more sustainable option.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN 420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Free from rubber accelerators
• Storage life: 3 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Easy to don thanks to a synthetic inner coating
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free Alternative Disposable gloves, nitrile Sensitive, powder-free

The ergo disposable, protective, nitrile gloves combine the comfort and "feel" of latex with the physical and chemical endurance of nitrile, with no risk of allergies. The ideal glove for all applications requiring high tactile sensation and protection against chemicals.

• Thin - very comfortable to wear
• Excellent tactile sensitivity - similar to latex
• Tried and tested quality product made of nitrile
• Excellent resistance to skin irritants in foodstuffs
• Specially formulated for a more resilient glove
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates / softeners and allergenic latex proteins
• Powder-free
• Easy to wear and particularly skin-friendly through special finishing process
• Colour: Lavender Blue
• Suitable for areas subject to HACCP standards
• Cat. III. AQL 1.5

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	lavender blue
Outside:	textured fingers
Inside:	powder-free halogenated
Size:	XS, S, M, L, XL
Thickness (measured in double layer):	0.12mm

Disposable, nitrile, heavy-walled, protective glove offering an enhanced resistance time against many chemicals. A protective glove for applications with higher safety requirements, but providing greater comfort in use than traditional chemical protective gloves.

• Very sturdy - higher material thickness
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Powder-Free
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards

Cat. III. AQL 1.5.


According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 240mm
Thickness (measured in double layer):	0.22mm

Disposable protective glove in nitrile with enhanced comfort in use and greater chemical protection - the standard glove for the laboratory.

• For forearm protection, 300 mm length
• Very comfortable to wear
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Powder-free
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards
• Cat. III. AQL 1.5.

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 300mm
Thickness (measured in double layer):	0.16mm

Disposable protective glove in nitrile with enhanced comfort in use and greater chemical protection - the standard glove for the laboratory.

• Comfortable to wear
• Good tactile sensitivity
• Tried and tested quality product made of nitrile - excellent resistance to skin irritants in foodstuffs
• More resilience through special formulation
• For single use in applications with an increased need for safety when handling chemicals
• Free from phthalates/softeners and allergenic latex proteins
• Easy to don and particularly skin-friendly through special finishing process
• Colour blue - suitable for areas subject to HACCP standards
• Cat. III.

According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 421, EN 420 Suitable for food handling.
You can find the appropriate compatibility list on www.llg-labware.com in the Downloads section.

Glove shape:	flat with rolled edge (ambidextrous)
Material:	nitrile
Colour:	blue
Outside:	textured
Inside:	powder-free halogenated
Size/total length:	S, M, L, XL / med. 240mm
Thickness (measured in double layer):	0.16mm