Eye wash stations

Ideal for the lab, filling stations or all work places where aggressive substances are used. "Eyes Fresh" can be attached to any standard cold water tap. For normal use of the tap, just press the button and the function changes back from the eye wash (returns automatically to eyewash-function when the tap is closed). Can be fitted onto taps with M22x1, 1/2" or 3/8" outer thread....

Two sprays in one. The hose can be used as a fixed eyewash when fitted into the mount. This allows the injured person to use both hands to hold open the eyes. The hose can also be removed from the mount so that other body parts and reclining patients can be treated.

• For wall and table mounting
• Wall-/ table mount included
• according to DIN 1988 und DIN EN 1717
• according to DIN EN 15154-2:2006 and ANSI Z358.1-2014
• DIN-DVGW tested and certificated
• DIN certification label included
• The spray heads ensure a wide distribution of water so that areas around the eyes are also covered and the exact positioning of the eyes is therefore not critical
• Large holes in the spray heads protect against limescale. The spray heads can be removed for cleaning purposes
• Rubber shrouds on the nozzles help prevent accidental injury
• Self-closing valve with squeeze lever operation
• Lightweight dust caps fall off automatically on operation
• Integral jet regulator keeps the water jet constant independent of the water pressure
• Built-in non-return valve prevents any backflow of contaminated water

• table mounting dimensions: M28 x 80mm
• installation dimension: 30mm
• fastening-parts kit: for surface mounting
• seal to table surface: with joint ring

• With two high performance spray heads
• Dust caps, which open automatically on operation, protect against dirt inside the spray heads
• Rubber sleeves protect the person seeking help against further injuries
• Table and wall mounting bracket
• Stainless steel covered hose 1500 mm
• Flow rate: 7 liter / minute / spray head
• Integrated flow regulation which guarantees uniform jet of water independent from water pressure
• According to ANSI Z358.1-2014 and DIN EN 15154-2:2006
• DIN-DVGW tested and certified

PremiumLine eye-/face wash unit with bowl and lid, wall mounted

• Housing, lid and bowl made of UV and impact resistant ABS plastics
• Integrated protective cover against dust
• Actuation by pulling down the lid
• Ball valve 3/8“ of stainless steel, with lever actuation by lid, DIN-DVGW tested and certificated
• Aerators made of brass with a very limited spray pattern, chrome-plated
• With integrated flow regulation valve 3/8” for setting the desired spray height and flow rate
• Inclusive sign for eye shower according to DIN EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metres
• Mounting height (lower edge) 910 mm (± 200 mm)
• According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
• According to ANSI Z358.1-2014 and DIN EN 15154-2:2006
• DIN-DVGW tested and certificated