Peristaltic pumps

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Alternative Peristaltic pump tubing, Tygon® LMT-55 with 2 colour-coded bridges Alternative Peristaltic pump tubing E-LFL with 2 colour-coded bridges Alternative Nominal tubing for pumps, Tygon® LMT-55 without collars

With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Alternative Peristaltic pump tubing E-LFL with 2 colour-coded bridges

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.

Specifications
Control accuracy motor:	± 0.5 %
Motor power:	100 W
Volume dosing:	0.001 ... 9999 ml
Interval dosing:	0.001 ... 9999 ml in breaks 0.1 s ... 750 h
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Specifications
Speed range:	5 ... 120 rpm
Flow rates single-channel pumps:	0.38 ... 813 ml/min
Flow rates multi-channel pumps:	0.005 ... 364 ml/min
Flow rate accuracy (water without counter pressure):	± 1 %
Weight:	7.7 kg

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Multi-channel Pumps for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Analog Pump drive Hei-FLOW Core 120 Alternative Analog Pump drive Hei-FLOW Core 600 Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Smooth start operation prevents from spills and splashing media
• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
With an optional pump head adapter the Hei-FLOW Core 120 can be upgraded for multi-channel operation.

Specifications
Control accuracy motor:	± 2 %
Flow rate accuracy (water without counter pressure):	± 5 %
Motor power:	100 W
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Weight:	7.6 kg
Specifications
Speed range:	10 ... 120 rpm
Flow rates single-channel pumps:	0.83 ... 861 ml/min
Flow rates multi-channel pumps:	0.005 ... 364 ml/min

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Multi-channel Pumps for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Smooth start operation prevents from spills and splashing media
• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
This pump drive is only suitable for use with single-channel pump heads.

Specifications
Control accuracy motor:	± 2 %
Flow rate accuracy (water without counter pressure):	± 5 %
Motor power:	100 W
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Weight:	7.6 kg
Specifications
Speed range:	50 ... 600 rpm
Flow rates single-channel pumps:	4.0 ... 4151 ml/min

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

• 100% oil-free pumping of gases
• gas ballast as standard for working with condensable vapours
• good vacuum even with gas ballast
• high vapour tolerance for water and solvents
• long service life, low maintenance

Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports

Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN^®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.

With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.

Alternative Chemistry Pumping Units VARIO® select Alternative Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic® Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

Simple Click'n'go mini tubing assembly cartridges.

• 3-stop colour-coded tubing
• Fixed-speed motor

Alternative Pumps, peristaltic, Reglo-Analogue Alternative Pumps, peristaltic, Reglo-Digital

The behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.
They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.
The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended.
These PLP pumps have angle connectors to which tubing can be attached either with or without additional brackets, depending on the tube size.

Alternative

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 300 mm in length but can be trimmed shorter to a desired length.

• Simple, fast tubing changes
• Fixed occlusion eliminates adjustment after tubing changes and assures operation against pressure up to 30 PSIG
• Contamination free pumping fluid contacts only the tubing material
• Controls are mounted on front panel with a separate single-turn speed control
• Flow direction switch with center "OFF" position
• Green LED power "ON" indicator
• "Prime" button runs pump at maximum speed to rapidly prime or flush tubing
• Reversible pump direction permits purging of tubing prior to use
• Flow rates less than 2 ìl/min to 105 ml/min
• Pressure up to 2.5 bar (30 PSIG)
• Accurate and repeatable flow delivery
• Filtration, up to 60 PSIG
• Address a wide range of critical applications with tubing materials that are approved to USP class VI, FDA and NSF standards
• Accommodates all sizes and formulations of microbore flow rated tubing ergonomic design
• Space efficient low profile, stackable design
• Remote capability actuate unit with a foot switch or contact closure

Specifications
Operating temperature:	0 to 40ºC
Storage temperature:	-25 to 65ºC
Housing materials:	Powder-coated steel
IP rating	IP 22
Agency approvals:	UL, cUL, CE, ROHS Power Supply
Controller dimensions (L x W x H):	17.8 x 13.4 x 11.4cm
Weight:	1.5kg
Voltage (50/60 Hz):	90-130 or 160-260V AC (auto selected)
Motor type:	PMDC
Control type:	PWM (Pulse Width Modulated)