Dosing pumps

The extra compact peristaltic pump. Ideal for continuous dosing applications. Space-saving, robust and with a wide range of easily exchangeable pump heads.

• Stable flow rates
• Compact design
• Reversible working direction
• Pump heads easily exchangeable
• Various pump heads with different hose diameters available as accessory
• Low power consumption
• Corrosion-resistant ABS housing
• OLED display for indication of speed and working direction
• Working temperature range from 0 to 40 °C
• Max. humidity 80 %

Scope of supply: Pump, pump head, Pharmed^® hose connectors 3 mm ID, 5 mm AD

Specifications
Speed range: Speed accuracy:	0.1 ... 150 rpm ±0.1 rpm
Flow rate range:	0.004 ... 63.69 ml/min
Weight: Dimensions (W x D x H):	0.8 kg 180 x 115 x 125 mm
IP code: Working temperature range: Max. humidity:	IP 31 0 ... 40 °C 80 %
Power rating: Power supply: Warranty:	10 W 100 ... 240 V, 50/60 Hz 3 years

Accessories Accessories for LLG-uniPERISTALTICPUMP 1 and 3

The peristaltic pump with high pumping capacity. Ideal for continuous dosing applications. Space-saving, robust and with stable flow rate.

• High pumping capacity of 398 ml/min
• Reversible working direction
• Hose connectors easily exchangeable
• Low power consumption
• Corrosion-resistant ABS housing
• OLED display for indication of speed and working direction
• Working temperature range from 0 to 40 °C
• Max. humidity 80 %

Scope of supply: Pump, pump head, Pharmed^® hose connectors 6,4 mm ID, 9,6 mm AD

Specifications
Speed range: Speed accuracy:	0.1 ... 150 rpm ±0.1 rpm
Flow rate range:	0.08 ... 398 ml/min
Weight: Dimensions (W x D x H):	0.8 kg 190 x 128 x 135 mm
IP code: Working temperature range: Max. humidity:	IP 31 0 ... 40 °C 80 %
Power rating: Power supply: Warranty:	20 W 100 ... 240 V, 50/60 Hz 3 years

Accessories Accessories for LLG-uniPERISTALTICPUMP 1 and 3

Ideal for a wide range of applications in chemistry and medical laboratories.
Made of antistatic HDPE with PTFE tube inside, for a great chemical resistance, ESD-safe.
With hinged lid. Just touch the dispensing dish with a brush, cloth or other applicator and solvent is brought
to the surface the instant it is needed. Stainless steel valves seal contents in bottle until used, preventing spills, dripping and
escaping fumes from endangering the user. Fluid pumped into the dish does not drip back into the bottle, keeping
stored liquids uncontaminated.

• Application: Metering liquids
• Pump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)
• Additional safety diaphragm for maximum security
• Easy exchange of the transfer diaphragm by activating the maintenance command in the operating program

Advantages:

• Intuitive operation, easy calibration
• Adjustable to liquid characteristics
• Self-priming and dry-running
• Spray water protected IP 65
• Small size

Specifications
Pressure:	6 bar
Allowed ambient temperature:	+5 ... +40 °C
Allowed liquid temperature:	+5 ... +80 °C
Dimensions (WxDxH):	93 x 150 x 144 mm
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE
Valves:	FFKM
Weight:	0,9 kg

Accessories Accessories Chemically-resistant Diaphragm Dosing Pumps SIMDOS® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Accessories Parts Kits for Chemically-resistant Diaphragm Dosing Pumps SIMDOS® Alternative Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 10

• Application: Metering liquids
• Pump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)
• Additional safety diaphragm for maximum security
• Easy exchange of the transfer diaphragm by activating the maintenance command in the operating program

Advantages:

• Intuitive operation, easy calibration
• Adjustable to liquid characteristics
• Self-priming and dry-running
• Spray water protected IP 65
• Small size

Specifications
Pressure:	6 bar
Allowed ambient temperature:	+5 ... +40 °C
Allowed liquid temperature:	+5 ... +80 °C
Dimensions (WxDxH):	93 x 150 x 144 mm
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE
Valves:	FFKM
Weight:	0.9 kg

Accessories Accessories Chemically-resistant Diaphragm Dosing Pumps SIMDOS® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Accessories Parts Kits for Chemically-resistant Diaphragm Dosing Pumps SIMDOS® Alternative Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 02

• Application: Transferring liquids
• Self priming, dry running and maintenance free
• Pump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)

Specifications
Suction head: Pressure head:	3 mWg 10 mWg
Ambient temp.: Liquid temp.:	5 ... 40 °C 5 ... 80 °C
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE-coated
Valves:	FFKM
Tubing connection:	ID 8 mm
IP code:	IP65

Accessories Accessories for Chemically-resistant Liquid Pumps LIQUIPORT® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Alternative Chemically-resistant Liquid Pumps LIQUIPORT® NF 300 / NF 1.300

• Application: Transferring liquids
• Self priming, dry running and maintenance free
• Pump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)

Specifications
Suction head: Pressure head:	3 mWg NF 300: 10 mWg / NF 1.300: 40 mWg
Ambient temp.: Liquid temp.:	5 ... 40 °C 5 ... 80 °C
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE-coated
Valves:	FFKM
Tubing connection:	ID 12 mm
IP code:	IP65

Accessories Accessories for Chemically-resistant Liquid Pumps LIQUIPORT® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Alternative Chemically-resistant Liquid Pumps LIQUIPORT® NF 100 / NF 1.100

Modular syringe racks can be purchased to create a multichannel syringe pump.
These racks will work with the Legato^® 200 or Legato^® 210 only. All of them could be for infuse only as well.

Small Syringe Multi-Rack: The small syringe multi-rack will accommodate up to six 30ml to 60ml syringes or up to ten 0.5µl to 20ml syringes. For Infuse/Withdraw applications.
Large Syringe Multi-Rack: The large syringe multi-rack will accommodate up to four 60ml to 140ml plastic syringes. For Infuse/Withdraw applications.
Microliter Syringe Multi-Rack: The microliter syringe multi-rack will accommodate up to four 0.5µl to 10ml syringes. For Infuse/Withdraw applications.

Space-saving container pump for single use. The medium to be filled only comes into contact with the conveying pipe. The conveying pipe is made of one piece and can easily be shortened to the respective container height with the supplied cutter for good residual emptying. The disposable conveying pipe can be replaced quickly and easily after use.

Scope of supply: Pump ball, universal plug made of soft PVC for container openings of 30 - 70 mm Ø, cutter and 10 disposable conveying pipes

Accessories Conveying pipes, PE

Space-saving container pump for single use. The medium to be filled only comes into contact with the conveying pipe. The conveying pipe is made of one piece and can easily be shortened to the respective container height with the supplied cutter for good residual emptying. The disposable conveying pipe can be replaced quickly and easily after use.

Scope of supply: Pump ball, universal plug made of soft PVC for container openings of 30 - 70 mm Ø, cutter and 10 disposable conveying pipes

Accessories Conveying pipes, PE Alternative Disposable foot pumps OTAL®, with PE conveying pipes

For OTAL^® disposable pump, Ø 12 mm, immersion depth 900 mm.

With adapter for coupling (NW 7.2) or compressed air hose with an inner diameter of 9 mm.

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

• 100% oil-free pumping of gases
• gas ballast as standard for working with condensable vapours
• good vacuum even with gas ballast
• high vapour tolerance for water and solvents
• long service life, low maintenance

Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports

Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN^®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.

With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.

Alternative Chemistry Pumping Units VARIO® select Alternative Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic® Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

The three-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and turbomolecular pumps. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.

• For tubes with ID = 8 mm
• Chemically resistant
• Resistant to aggressive solvents and acid vapours
• Elastomer diaphragms with PTFE layer
• Pump and connection heads are carbon fibre reinforced
• Integrated motor protection switch
• Vibration isolating feet

Scope of delivery: 4-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).

Specification
Pump speed 50 / 60 Hz:	75.0 / 81.7 l/min
Final vacuum (abs.):	< 2 mbar
Suction / pressure connection:	Hose nozzle DN 8
Noise:	< 44 dB(A)
Motor power:	370 W
Voltage / frequency:	230 V / 50/60 Hz 230/400 V / 50/60 Hz
Dimensions (W x D x H):	380 x 230 x 170 mm
Weight:	18.3 kg
IP code:	IP 54

Oil-free compressed air pumps for small systems or in the laboratory area.

• High hydraulic performance
• Self-priming (even when dry)
• Maintenance-optimized design and easy installation
• Non-stalling operation

Highly resistant diaphragm made of TPV (EPDM-PP) and TFM (PTFE). Housing made of PVDF, carbon fiber reinforced.

Accessories Air connection set for double diaphragm pumps DMP 1/4" series Alternative Double diaphragm pump DMP 1/4" PPB Alternative Double diaphragm pumps DMP 1/4" PPT Alternative Double diaphragm pumps DMP 1/4" KNTC Ex

Oil-free compressed air pumps for small systems or in the laboratory area.

• High hydraulic performance
• Self-priming (even when dry)
• Maintenance-optimized design and easy installation
• Non-stalling operation

Highly resistant diaphragm made of TPV (EPDM-PP) and TFM (PTFE). Conductive version approved according to ATEX directive 2014/34/EU, category 4. Housing made of PVDF, carbon fiber reinforced.

Accessories Air connection set for double diaphragm pumps DMP 1/4" series Alternative Double diaphragm pump DMP 1/4" PPB Alternative Double diaphragm pumps DMP 1/4" KNT Alternative Double diaphragm pumps DMP 1/4" PPT

Oil-free compressed air pumps for small systems or in the laboratory area.

• High hydraulic performance
• Self-priming (even when dry)
• Maintenance-optimized design and easy installation
• Non-stalling operation

Highly resistant NBR diaphragm. Housing made of PP, glass fibre reinforced.

Accessories Air connection set for double diaphragm pumps DMP 1/4" series Alternative Double diaphragm pumps DMP 1/4" KNTC Ex Alternative Double diaphragm pumps DMP 1/4" KNT Alternative Double diaphragm pumps DMP 1/4" PPT

Oil-free compressed air pumps for small systems or in the laboratory area.

• High hydraulic performance
• Self-priming (even when dry)
• Maintenance-optimized design and easy installation
• Non-stalling operation

Reinforced elastomers and highly resistant thermoplastic diaphragm made of TPC-ET and TFM (PTFE). Housing made of PP, glass fibre reinforced.

Accessories Air connection set for double diaphragm pumps DMP 1/4" series Alternative Double diaphragm pump DMP 1/4" PPB Alternative Double diaphragm pumps DMP 1/4" KNTC Ex Alternative Double diaphragm pumps DMP 1/4" KNT

Feed pump for reproducible results. The speed is adjustable with the analog control knob, and the electronic speed control guarantees constant speeds even under changing loads.

• Speed, direction of rotation and on/off function is controllable with an analog interface
• A press of the max. button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional pump heads with convex rollers for cell protection are available for use in cell biology
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations

The flow rate depends on the used pump head. The pump head is not included. Please order separately.
Scope of supply: Pump drive, adapter for multi-channel pump heads