Heating-Thermostats

Filter

 Heating blocks for digital dry bath LLG-uniBLOCKTHERM

LLG

...

 Digital dry bath LLG-uniBLOCKTHERM

LLG

Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uni BLOCKTHERM.

  • Digital control with LED display
  • Can be used up to 120 °C
  • For timer and continuous operation
  • Can be used with different heating blocks
  • 1 x block unit
  • With overheating protection
...

 Heating block set for digital dry bath LLG-uniBLOCKTHERM

LLG

Heating block with aluminium beads as an alternative to exchangeable blocks with borings.
The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uni...

 Open Tanks

PolyScience

For use with Immersion circulator LX and MX....

 Accessories for water baths Optima™ series

Grant

Drain syphon SY1: For the rapid draining of baths.

Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.

PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used....

 Assembly frames

JULABO

Stainless steel bridge for the new CORIO™ series....

 Circulator Baths, CORIO™ CD

JULABO

CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications....

 Cooling circulators

Huber

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models....

 Dry Baths, AccuBlock™

Labnet

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

  • Single, dual and four block capacity
  • Dual display
  • USB connectivity enables traceability of data
  • Molded block chamber
...

 Dry Block Heaters, digital

Ohaus

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention....

 Thermoregulator DYNEO™ DD

JULABO

For internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 litres.

  • Easy switching between internal and external circulation
  • Large colour TFT Display
  • Easy to operate via central controller
  • Integrated programmer for 8 x 60 program steps
  • Continuously adjustable, powerful pressure pump
  • USB interface
  • External Pt100 sensor connection
  • Class III (FL) acc. to DIN 12876-1
...

 Lift-up gable bath covers for bath tanks, stainless steel

JULABO

...

 Flat bath covers for bath tanks, stainless steel

JULABO

...

 Function upgrade for Huber circulators

Huber

E-grade - innovative activation keys for the functionality to suit your budget and process requirements

Every application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update....

 Heating circulator MAGIO MS/MX

JULABO

For precise temperature control of internal and external applications.

  • Simple control of complex applications
  • Infinitely adjustable, extremely powerful pressure and suction pump
  • Large, high-resolution TFT touch display with multilingual user interface
  • Medium-contacting parts made of stainless steel
  • Integrated programmer
  • External Pt100 connection
  • USB interface
  • RS232 interface
  • Ethernet interface
  • High quality thermal insulation of the bath tanks
  • Integrated drain cock for easy and safe emptying
  • Classification III according to DIN 12876-1
...

 Heating bath circulator CORIO™ CD-BT, with transparent bath tank

JULABO

Heating bath circulator for internal and external temperature applications with transparent bath tank and pump connections.

  • Bright, white, easy to read display
  • Very quiet
  • Pump change-over between internal and external circulation
  • USB connection
  • Class III (FL) according to DIN 12876-1
...

 Heating bath circulator, CORIO™ CD-B, with stainless steel bath tank

JULABO

Heating bath circulator for internal and external temperature applications with stainless steel bath tank and pump connections.

  • Bright, white, easy to read display
  • Very quiet
  • Pump change-over between internal and external circulation
  • USB connection
  • Integrated drain screw (except for B5)
  • Class III (FL) according to DIN 12876-1
...

 Heating bath circulators

Huber

Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath....

 Heating bath circulators, CORIO™ C with stainless steel bath tanks

JULABO

CORIO™ C Open Heating Bath Circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.

  • For internal applications
  • Bright, white, easy to read display
  • Whisper quiet
  • Integrated drain screw (except for B5)
...

 Heating bath circulators, CORIO™ C with transparent bath tanks

JULABO

CORIO™ C Open Heating Bath Circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.

  • For internal applications
  • Bright, white, easy to read display
  • Whisper quiet
...

 Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters

Ohaus

...

 Heating circulators

Huber

Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra....

 Heating Circulators Accessories

JULABO

...

 Telescopic bridges for heating and refrigerated circulators

JULABO

Telescopic bridges are extendable from 330 to 680 mm....

 Heating circulators with stainless steel baths

Huber

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications....

Add to shopping cart