Dynamic Temperature Control Systems

Forte HT30-M1 and Forte HT60-M2

Julabo High Temperature Circulators have a compact, closed design and are ideally suited for wide working temperature ranges.

• rapid heating
• high pump capacity, reducible via adapter
• small footprint
• minimal filling volume
• cooling water connections for applications at particularly high temperatures (cooling zone in unit)
• wide working temperature range without changing bath fluids
• avoids oxidation and cracking of the bath fluid. This ensures a prolonged lifetime of the bath fluids recommended by Julabo
• can be easily integrated into a miniplant installation
• time-saving filling process for the entire system with permanent air purge

Forte HT30-M1 and Forte HT60-M2 with C.U. cooling unit

Using the optional C.U. cooling unit, the working temperature range can be further extended downwards. Additionally a high cooling capacity is available if
constant tap water cooling is carried out.

• temperature applications from +40°C with controlled tap water cooling
• rapid cooling to low temperature values
• dynamic control characteristics: Automatic control of exothermic reactions in the connected system

Accessories Temperature hoses, stainless steel 1.4404, single insulation Accessories Temperature hoses, stainless steel 1.4404, triple insulation Accessories ProfiNet Interface

Highly dynamic temperature control systems suitable for high-precision, external temperature control tasks, such as reactor temperature control, material tests, or temperature simulation.

• Space-optimised, compact design
• Short heating and cooling times
• Large working temperature ranges without changing heat transfer media
• Minimized floor space due to side panels without ventilation slits
• 5.7" TFT touch screen
• SD card slot
• Interfaces for USB, Ethernet, RS232, Modbus
• Connections for alarm output, Pt100 external sensor, and standby-input
• ICC cascade temperature control
• Electronic level indicator
• Integrated programmer for 8 x 60 steps
• Class III (FL) acc. to DIN 12876-1

-With air-cooled refrigerating machine

• A 38, A 41, and A 70 with natural refrigerants

Specifications
Temperature stability:	±0.01 … 0.05 °C
Pump capacity
Flow rate:
A30	25 l/min
A40 / W40 / A80 / W80	16 ... 40 l/min
A45 / A45t / W50 / W50t	35 ... 76 l/min
A85 / A85t	35 ... 80 l/min
Pressure:
A30	0.5 bar
A40 / W40 / A80 / W80	0.3 ... 1.7 bar
A45 / A45t / W50 / W50t / A85 / A85t	0.48 ... 3.2 bar

Accessories Temperature hoses for highly dynamic temperature control systems PRESTO™, stainless steel 1.4404, triple insulation Accessories ProfiNet Interface Alternative Highly dynamic temperature control systems PRESTO™, water-cooled

Highly dynamic temperature control systems suitable for high-precision, external temperature control tasks, such as reactor temperature control, material tests, or temperature simulation.

• Space-optimised, compact design
• Short heating and cooling times
• Large working temperature ranges without changing heat transfer media
• Minimized floor space due to side panels without ventilation slits
• 5.7" TFT touch screen
• SD card slot
• Interfaces for USB, Ethernet, RS232, Modbus
• Connections for alarm output, Pt100 external sensor, and standby-input
• ICC cascade temperature control
• Electronic level indicator
• Integrated programmer for 8 x 60 steps
• Class III (FL) acc. to DIN 12876-1

-With water-cooled refrigerating machine

• W 41, W 93, and W 93x with natural refrigerants

Accessories Temperature hoses for highly dynamic temperature control systems PRESTO™, stainless steel 1.4404, triple insulation Accessories ProfiNet Interface Alternative Highly dynamic temperature control systems PRESTO™, air-cooled

The 3-in-1 mixer for plates, tubes and vortex mixing. High speed instrument for the complete resuspending of pellets, mixing PCR setups, mixing viscous liquids and suspensions (incl. beads), mixing restriction digestions, immunoassays, colorimetric assays, reporter gene assays, vortexing numerous tube formats (e.g. 15 and 50 ml conical tubes). Fully mixing in plates (96 or 384-wells) or reaction tubes in seconds.

• High-speed mixer for fast and efficient mixing of small volumes in all common vessel formats up to 50 ml
• 5 soft keys with pre-defined standard mixing parameters for easy usage
• Integrated vortex function for individual sample mixing
• 2DMix-Control (planar mixing orbit) and anti-spill technology for controlled mixing in seconds, without lid wetting and cross-contamination
• Timer (15 s to 99.3 h)
• Minimal hand/arm vibration transfer during vortexing (PhysioCare Concept^®)
• Very stable, remains stationary even at maximum mixing speed
• Whisper quiet operation

Specifications
Type of movement:	orbital
Orbit:	3 mm
Speed range:	300 ... 3000 rpm
Touch vortex frequency	3500 rpm
Timer:	15 s ... 99.5 h, continuous
Noise level	<50 dB(A)
Dimensions (W x D x H):	170 x 230 x 130 mm
Weight:	4.2 kg
Max. power consumption	40 W
Power supply:	230 V, 50/60 Hz

• With graduation
• Laboratory flange LF
• With groove
• Two connectors with threads GL 14 or GL 18
• Made of DURAN^® tubing

Other sizes on request.

Alternative Reaction vessels, cylindrical, with thermostatic jacket

Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.

• 3.5" TFT colour display with multilingual user interface
• Integrated programmer for 8 x 60 program steps
• Easy pump switching between internal and external circulation
• External pump connections (M16x1)
• Infinitely adjustable pressure pump
• USB connection
• Space-saving cooling coil design yields more usable space in the bath tank
• External Pt100 connection
• Stainless steel bath tank including bath lid and drain tap
• Removable ventilation grid
• 2 hose olives each suitable for hose inner diameter 8 and 12 mm included
• Class III (FL) acc. to DIN 12876-1

Temperature stability:	±0.01 °C
Heating capacity:	2 kW
Flow rate:	8 ... 27 l/min
Pump pressure:	0.1 ... 0.7 bar
Timer:	0 ... 99 h 59 min

Accessories Hose olives for Refrigerated circulators Accessories Tubing insulations for refrigerated and heating circulators Accessories Test tube racks for heating and refrigerated circulators MAGIO™ / DYNEO™ / CORIO™ Accessories Lockable bath cover for heating and refrigerated circulators MAGIO™ / DYNEO™ / CORIO™ Accessories Telescopic bridges for heating and refrigerated circulators Accessories Variable platform for heating and refrigerated circulators MAGIO™ / DYNEO™ / CORIO™ Accessories Temperature hoses, stainless steel 1.4404, single insulation Accessories Temperature hoses, stainless steel 1.4404, triple insulation Accessories ProfiNet Interface Alternative Refrigerated circulators DYNEO™ DD, with analogue interface Alternative Refrigerated circulators DYNEO™ DD, with RS232 interface

The Hydro water baths are optimally equipped for every application in the laboratory. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories. The H 8 A and H 16 A models are also equipped with a circulation system for optional mixing.

• Interior made of high quality stainless steel
• Applications in the boiling range possible (temperature range: 25 to 100 °C)
• TFT color display for intuitive operation, temperature display in °C and °F
• Programmable timer
• Optical and acoustic alarm in the event of an error

Accessories LLG-Floating pellets, PP Accessories Inserts, stainless steel for Water baths Hydro

Temperature hoses with special triple insulation and two connections. The ends are covered with silicone caps for protection.