Thermoblocks

Alternative Block Heaters, analogue and digital, BH-200 series

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23

Accessory features: Interchangeable blocks

• Excellent heat insulation, safe to touch (no direct contact with hot surfaces)
• Interchangeable thermoblocks for 24 x 0.5ml, 1.5ml or 2.0ml microtubes: Each supplied with a work rack and cooling pack for rapid cooling to 0°C (instead of an ice bath)
• Interchangeable thermoblock for microtitration plates of all well forms incl. deep well microplates; Adapter plate for 96 x 0.2ml PCR tubes for use with the microtitration plate block
• Block with lid for headspace and other laboratory tubes with diameter 11mm to 12mm, height 30mm to 76mm
• CombiBox, interchangeable thermoblock for universal temperature control of various sizes of tubes; can be attached easily, without locking

Accessories Microtube thermoshaker PHMT

Accessories Block Heaters, analogue and digital, BH-200 series

Accessories Dry Block Heater

• choice of either analogue or digital models
• digital models available with either 130 or 200 °C maximum temperature
• three block model for extra capacity
• dual control models have two blocks with independent temperature control
• uniform and stable block temperatures

Designed for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.
Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.
Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.
Heats to 100°C in <12 mins.
Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.
With BioCote, silver-based, antimicrobial protection.

Specifications
Temperature stability at 37°C:	± 0.1°C
Uniformity within block at 37°C:	± 0.1°C
Uniformity within block at 130°C:	± 1°C
Electrical supply:	230V 50Hz
Number of blocks: Temperature range : Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:	BH200-2 // BH-200D-2 // BH-200D-2-HT 2 Amb.+8°C to +130°C // Amb.+8°C to +130°C // Amb.+8°C to +200°C Calibrated knob // LED // LED 10°C // 0,1°C // 0,1°C 235 x 280 x 115mm 2.1kg // 2.3kg // 2.3kg 300W
Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:	BH-200D-3 // BH-200D-3-HT 3 Amb.+8°C to +130°C // Amb.+8°C to +200°C LED 0,1°C 310 x 280 x 115mm 3.2kg 450W
Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:	BH-200DC-2 // BH-200DC-2-HT 2 (independent control) Amb.+8°C to +130°C // +50°C to +200°C LED 0,1°C 310 x 280 x 115mm 2.9kg 300W

Accessories Aluminium blocks for block heaters BH-200 series Accessories Safety covers for Block heaters BH-200 series Alternative Block thermostats,QBD and QBH series

Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.

Temperature range:	-10 to +100°C
Heat up, amb. to 100°C:	15 min
Cool down, 100°C to amb.:	15 min
Cool down, amb. to -10°C:	21 min

Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP

Not required with QDP-FL mictrotiter blocks

Accessories Block thermostats,QBD and QBH series Accessories Digital block thermostats QB, for QBD, QBH series

For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:

• Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocks
• Fast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.
• Built-in timer, programmable delayed start and RS232 output for data monitoring
• Includes block removal tool

Requires but does not include interchangeable QB-series blocks

Specifications
Temperature range:	ambient 5 to 130 °C, QBH2: ambient 5 to 200 °C
Stability at 37 °C: Uniformity	±0.1 °C
within the block at 37 °C: across similar blocks at 37 °C:	±0.1 °C ±0.2 °C
Supply requirements:	230 V, 50/60 Hz, single phase

Accessories Digital block thermostats QB, for QBD, QBH series Accessories Block thermostats, QBD, QBH series, accessory covers Alternative Block Heaters, analogue and digital, BH-200 series

The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.

Specifications Thermostats:	HeatingBlock TH 21 // Heating/CoolingBlock TK 23
Temperature operation range:	Amb. +3°C to +130°C // Amb. -16°C to +90°C
Temperature adjustable range:	0°C to +137°C // -10°C to +105°C
Accuracy/ resolution:	±0.1°C / 0.1°C // ±0.3°C / 0.1°C
Max. heating time:	9.5°C / min // 4°C / min
Max. cooling time:	-- // 7°C / min
Dimensions (W x D x H):	220 x 330 x 109mm // 220 x 330 x 144mm
Capacity:	2 exchangeable blocks (not included)
Weight (with block / blocks):	approx. 3.5kg // approx. 7.5kg
Electrical heating/ cooling power:	350W // 130W
Supply requirements:	230V, 50Hz
Easy Control // Smart Control:	Timer 19h 59min // 30 program steps

Accessories Exchangeable blocks for Thermomixers and BlockThermostats Accessories Accessories for ThermoMixers and BlockThermostats Successor  Alternative Digital Dry Bath AccuBlock™Mini Alternative Dry Baths, AccuBlock™ Alternative Block thermostats PCH-1 / PCH-2 / PCH-3 Alternative Block thermostats,QBD and QBH series Alternative Block Heaters, analogue and digital, BH-200 series Alternative

The ideal device to accurately set and maintain temperatures. Precise temperature control is achieved using optimally balanced heating and cooling elements (peltier technology). The cooling and heating temperature keys provide quick access to five important experimental temperatures (4°C, 16°C, 37°C, 56°C and 95°C). You can also individually store 15 programs.

• Excellent temperature accuracy
• Precise temperature control from -10 to +110°C (+110°C can be set when using 12mm and cryo SmartBlocks™)
• Prevent condensation and improve temperature homogeneity with the new ThermoTop
• Comprehensive range of program functions

Specifications
Temperature operation range:	min: +30°C below RT, max: +110°C
Temperature adjustable range:	-10 to +110°C (+110°C can be set when using 12mm and cryo SmartBlocks™)
Accuracy/ resolution:	±0.5°C at +20 to +45 °C
Max. heating time:	5.5°C/min
Max. cooling time:	5°C/min between +110°C and RT
Dimensions (W x D x H):	206 x 304 x 131 mm
Capacity:	dependent on Eppendorf SmartBlock™
Weight:	4.3 kg
Power consumption:	200 W (max.)
Power supply:	220 - 240 V ±10%, 50/60 Hz

Accessories Exchangeable blocks Eppendorf SmartBlocks™ and accessories for Eppendorf ThermoMixer™ C and ThermoStat C

Accessory blocks for QB series only. Interchangeable. Aluminium. Block dimensions (L x W x H): 140 x 50 x 63 mm. For e.g. test tubes or microliter vials from 0.2 ml to 2.0 ml.

Accessories Block thermostats, QBD, QBH series, accessory covers Accessories Block thermostats,QBD and QBH series

AccuBlock™ Mini combines digital control, a fast heating microtube block and a convenient AccuRack™ transfer system, all in an ultra compact footprint. With a temperature range to 100°C which can be set in increments of 0.1°C, AccuBlock™ Mini is suitable for a range of uses in life science, molecular biology, environmental and industrial laboratories and a variety of applications including incubation, enzyme reactions, immunoassays.

• Accepts up to 12 x 1.5 ml tapered microcentrifuge tubes
• With thermometer well for temperature confirmation and calibration
• Microprocessor controlled heating element
• Easy to read 4 digit LCD display
• Built in calibration mode allows end users to calibrate the bath as needed

The included AccuRack™ allows quick loading or unloading of all sample tubes simultaneously. It is self standing and can be used to hold samples while they are prepared for loading. Samples can also be loaded directly into the AccuBlock^™Mini without the AccuRack™.

Specifications:
Temperature range:	Ambient +5 °C ... 100 °C, resolution 0.1 °C
Temperature uniformity:	±0.2 ºC
Temperature accuracy:	±0.2 ºC
Timer:	0 ... 19h 59 min or continuous
Block material:	Anodized aluminum
Block capacity:	12 x 1.5 ml tubes
Dimensions (W x D x H):	140 x 120 x 60 mm
Weight:	1.3 kg
Supply requirements:	230 V 50/60 Hz

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

• Single, dual and four block capacity
• Dual display
• USB connectivity enables traceability of data
• Molded block chamber

Please order blocks separately.

Specifications
Temperature range: Temperature uniformity: Temperature resolution: Temperature accuracy:	Ambient +5 to +150°C, adjustable in 0.1°C steps ± 0.2°C ± 0.1°C ± 0.3°C
Temperature control:	Microprocessor
Timer:	1 ... 99h 59 min or continuous
Block material:	Aluminium
Dimensions (W x D x H)
Single / Dual Block: 4 Block:	210 x 290 x 120 mm 210 x 390 x 120 mm
Weight
Single / Dual Block: 4 Block:	3.2 kg 4.4 kg
Power supply:	230 V, 50/60 Hz

Accessories Accessories for Dry Baths, AccuBlock™ Alternative Block Heaters, analogue and digital, BH-200 series

Digital block heaters for 1, 2, 3 or 4 aluminium blocks provides precise temperature control in small vessels. Included PT 1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.

• Stepless adjustable temperature up to 120°C
• Timer: Countdown, adjustable from 1min to 99h 59min
• Counter: Display of heating time
• Highly versatile with a large number of blocks
• Error code display
• Fixed safety circuit
• Acoustic signal at end of test

Without blocks. Please order separately.

Specifications
Temperature range	RT to +120°C
Display:	LED
Heat control accuracy:	±1K
Connection for ext. temperature sensor:	DIN 12878
Control accuracy with sensor:	±1K
Temperature constancy in medium:	±1K
Temperature stability within the blocks at 37°C:	±0.2°C
Temperature stability within the blocks at 60°C	±0.4°C
Fixed safety circuit:	+150°C
Protection class acc. to DIN EN 60529:	IP 21
Power supply:	220-240V, 50/60Hz

Accessories Aluminium blocks for Dry Block Heater

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.

• Microprocessor Control
• LED Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Audible Alarm

Without blocks. Please order separately.

Specifications
Temperature range: Temperature stability at 37 °C:	ambient +5 to 120 °C ±0.2 °C
Uniformity within block at 37 °C:	±0.2 °C
Uniformity across blocks at 37 °C / Heat up time to 100 °C
1 block: 2 blocks: 4 blocks: 6 blocks:	- / 45 min ±0.1 °C / 50 min ±0.2 °C / 60 min ±0.3 °C / 65 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Temperature Probe Kit for Dry Block Heaters Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23

An important step in photometric water analysis is the digestion of the sample. The heating blocks NANOCOLOR^® VARIO 4 and NANOCOLOR^® VARIO C2 guarantee a fast and safe performance of all required sample digestions in water and waste water analysis.

Thanks to its active cooling function, the new NANOCOLOR^® VARIO HC features, in addition to its quick heating phase, an equally fast cool-down time. Thereby, the instrument provides an even faster sample digestion, which leads to a siginifcant saving of time.

With the new NANOCOLOR^® VARIO Mini, its compact size and flexible power supply, sample digestions on the road are no longer a challenge.

Grantás block heating system BTD with fixed block is designed for rapid and precise heating of microtubes up to 100ºC.

• Digital temperature control for optimum precision
• Heating block holds combinations of four microtube sizes simultaneously - up to a total of 49 tubes: 24 x 1.5/2.0 ml, 15 x 0.5 ml, 10 x 0.2 ml
• Flexible tube sizes and rapid heat-up time enables swift change of application
• Convenient integral timer for time-sensitive incubations
• Sturdy, durable, easy-to-clean plastic construction; compact design with small footprint
• 2-line display for simple and precise setting of temperature/time and for monitoring current status during operation

Specifications
Temperature range:	ambient +5 to 100°C
Stability at 37°C:	±0.1°C
Uniformity:	±0.1°C
Heat-up times:	25ºC to 100ºC in 15 min 25ºC to 37ºC in 4 min
Timer:	1 min to 96 h
Power supply:	230V, 50/60Hz

Powerful thermoshakers available for samples with smallest volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples, DNA/RNA samples or Elisa assays. Without cross-contamination and with an optimal mixing result. Thermo shaker Orbital Δ + with heating / cooling function (cooling rate 2.5 K/min).

• Large and clear display with a convenient menu structure allows for intuitive operation
• Two different speed modes for optimal mixing
• Speed adjustment according to insert, attachment and filling volume
• Robust aluminum die cast housing

Specifications	Orbital Δ // Orbital Δ +
Temperature range:	ambient +5 ... 100 °C // ambient -15 ... 100 °C
Temperature control:	1 ±K
Uniformity:	0.5 °C
Orbit:	1.5 mm
Display: Programs: Timer:	TFT 2 1 s ... 6000 min
Capacity:	0.3 kg
Dimensions (W x D x H):	220 x 350 x 150 mm // 220 x 350 x 125 mm
Weight:	9.5 kg // 8.8 kg
Power consumption:	100 W
Power supply:	100 ... 240 V, 50/60 Hz
IP code:	IP 21