Ovens, Furnaces

Filter

 Ashing/Burn off furnaces LV 3/11 - LVT 15/11

Nabertherm

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.

  • Tmax 1100°C
  • Heating from two sides
  • Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace
  • Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
  • Housing made of sheets of textured stainless steel
  • Dual shell housing for low external temperatures and stability
  • Optional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operator
  • Solid state relays provide for low noise operation
  • Air exchange of more than 6 times per minute
  • Good temperature uniformity due to preheating of incoming air
  • 220-240 V 1/N/PE 50/60 Hz connector as standard
...

 Chamber furnaces

Nabertherm

The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems....

 High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series

Nabertherm

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace...

 Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller

Snoltherm UAB

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller

UMEGA

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller

Snoltherm UAB

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller

UMEGA

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller

Snoltherm UAB

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller

Snoltherm UAB

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

 Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller

Snoltherm UAB

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

  • Side, top or down-opening door depending on model
  • Outer casing made of powder-coated sheet metal
  • Ceramic bottom plate
  • Control panel in the lower part of the oven
  • Incl. door safety switch
  • Fast heating time
  • Good stability and temperature distribution
  • Low power consumption
...

Add to shopping cart