Heating baths

Filter

 Heating bath HB 1500

Juchheim

The heating bath HB 1500 is developed for varied tasks. The bath can be filled with water, oil or sand. Modern microprocessors control the temperature. With measuring circuit monitoring for over- and under-temperature, sensor and line short-circuit, as well as sensor and line breakage.

  • Microprocessor controller with 4-digits 7-segment display, 10 mm high, green
  • Freely configurable
  • Self-optimising temperature control
  • Measuring and control range up to 260 °C
  • Setting of heating power from 1 to 99 %
  • Overtemperature switch-off >10 K + setpoint
  • Wear-free internal temperature sensor at the bottom of the pot
  • On-Off switch 2-pole, green, illuminated
  • Switchable to external sensor
  • Material bath/housing stainless steel, front and rear anodised aluminium
...

 Heating bath HB 1500-S

Juchheim

The heating bath HB 1500-S is developed for varied tasks. The bath can be filled with water, oil or sand. The appliance is equipped with 2 temperature controllers with microprocessor. The upper temperature controller serves as a safety temperature limiter. If the safety temperature is exceeded, the heating is switched off at all poles. The temperature is measured via an internal temperature sensor at the bottom of the pot....

 Heating Bath HB Digital

IKA-Werke

Compact and ergonomic heating safety bath for all tempering media.

  • Ergonomic handles
  • Key button to lock heating bath temperature
  • Clear, black-and-white display
  • Permanent set-point/actual temperature display
  • 3 different safety operating modes
  • USB interface
...

 Heating Bath HB eco

IKA-Werke

Compact and ergonomic heating safety bath.

  • Ergonomic handles
  • Clear, black-and-white display
  • Alternating set-point/actual temperature display
  • USB interface
...

 Accessories for Heating bath HBR 4 control

IKA-Werke

Set of rings H 240: To cover the heating bath.
Intermediate base H 159: Allows insertion of vessels into the bath, without affecting the stirrer motion....

 Heating circulators with stainless steel baths

Huber

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications....

 Sand bath ST with performance control and thermostatic controller

Gestigkeit

For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug....

 Cooling/heating bath circulator CBC visc lite

IKA-Werke

Designed for combination with the IKA ROTAVISC viscometers and covers a wide temperature range.

  • A second beaker (600 ml) can be pre-tempered during the measurement
  • Optimised water flow management in the insulated bath for fast and precise temperature control.
  • Equipped with environmentally friendly natural refrigerant R290
  • External pump connection for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakers
  • Easy to maintain thanks to easily removable and therefore easy-to-clean air filters
...

 Ultrasonic baths Elmasonic Easy, with heating, without stopcock

Elma

Powerful and high-quality entry-level series for a wide range of applications. Intensive cleaning in dynamic mode or gentle and economic cleaning with quiet operation in eco mode.

  • Splash-proof housing and cleaning tank, made of stainless steel
  • Electronic selector switch on wipeable membrane keypad.
  • LED display of all operating states
  • Timer from 1 to 30 min or continuous operation
  • Automatic safety switch-off with wake-up function
...

 Hotplates C-MAG HP 7/C-MAG HP 10

IKA-Werke

Made of glass ceramic which offers excellent chemical resistance.

  • Fixed safety circuit of 550 °C
  • Hot Top indicator: Hot surface warning to prevent burns
  • Exact temperature setting via digital display (LED)
  • Digital error code display
  • Raised control panel for protection against spilt liquids
...

Add to shopping cart