Cooling incubators

Filter

 Accessories for cooled incubators BK 6160

Thermo

...

 Constant climate chambers series KBF-S Solid.Line

BINDER

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.

  • Electronically controlled APT.line™ preheating chamber with cooling system
  • Inner chamber made completely of stainless steel
  • 2 stainless steel racks incl. shelf support
  • Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording
  • Humidity control with capacitive humidity sensor and vapor humidification
  • Independent temperature safety device class 3.1 (DIN 12880) with optical and audible alarm
  • Access port with silicone plug diam. 30mm, left side
  • LCD display for indication of temperature, humidity, alarms and additional information
  • Internal data logger with USB interface
  • Independent water supply via canisters
  • Models from 240 l capacity with double swivel castors and brake
...

 Cooled incubators with compressor cooling ICP

Memmert

The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.

Standard equipment :

  • PID microprocessor control with integrated auto-diagnostic system
  • Interior stainless steel, material 1.4301 (ASTM 304) very stable and easy to clean
  • Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)
  • High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
  • Internal data logger with a storage capacity of at least 10 years
  • German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
  • Digital backwards counter with target time setting adjustable between 1 minute and 99 days
  • The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
  • Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT
...

 Cooling incubator KB

BINDER

Cooling incubator with compressor technology for safe and reproducible incubation even at high ambient temperatures. Thanks to extensive programming options and homogeneous incubation conditions, the cooling incubator is suitable for a wide range of applications.

  • APT.line™ preheating chamber technology
  • Hot air disinfection at 100 °C
  • Adjustable fan speed
  • Controller with time-segment and real-time programming
  • Inner door made of tempered safety glass
  • 2 stainless steel racks
  • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible alarm
  • Computer interface: Ethernet
...

 Cooling incubator KT

BINDER

Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.

  • APT.line™ preheating chamber technology
  • Hot air disinfection at 100 °C
  • Adjustable fan speed
  • Controller with time-segment and real-time programming
  • Inner door made of tempered safety glass
  • 2 stainless steel racks
  • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
  • Computer interface: Ethernet
  • Data recording and USB interface
...

 Incubators BF Avantgarde.Line

BINDER

Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.

  • High temperature accuracy thanks to APT.line™ technology
  • 100 °C disinfection routine
  • High process reliability
  • Controller with LCD display
  • Electromechanical control of the exhaust air flap
  • Inner door made of tempered safety glass
  • 2 chrome-plated racks
  • Chambers up to 115 l are stackable
  • Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
  • Ergonomic handle design
  • USB connection for data recording
...

 Incubators BD Avantgarde.Line

BINDER

Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.

  • High temperature accuracy thanks to APT.line™ technology
  • 100 °C disinfection routine
  • High process reliability
  • Controller with LCD display
  • Electromechanical control of the exhaust air flap
  • Inner door made of tempered safety glass
  • 2 chrome-plated racks
  • Chambers up to 115 l are stackable
  • Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
  • Ergonomic handle design
  • USB connection for data recording
...

 Incubators BD Classic.Line

BINDER

Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.

  • APT.line™ preheating chamber technology
  • Safe and reproducible results even with high batch throughputs in long-term operation
  • Disinfection routine at 100 °C
  • Adjustable exhaust air flap
  • Controller with timer functions
  • Inner door made of tempered safety glass
  • 2 chrome-plated racks
  • Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm
  • Computer interface RS 422
...

 Incubator BF Classic.Line

BINDER

Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.

  • APT.line™ preheating chamber technology
  • Safe and reproducible results even with high batch throughputs in long-term operation
  • Disinfection routine at 100 °C
  • Adjustable exhaust air flap
  • Controller with timer functions
  • Inner door made of tempered safety glass
  • 2 chrome-plated racks
  • Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm
  • Computer interface RS 422
...

 Peltier-cooled incubators IPP

Memmert

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.

  • Extremely quiet, vibration-free and space saving as no compressor is required
  • No condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchanged
  • LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)
...

 Peltier-cooled incubators IPPplus

Memmert

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.

  • Extremely quiet, vibration-free and space saving as no compressor is required
  • No condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchanged
  • LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)
...

 Refrigerated incubators IMP

Thermo

  • Outstanding temperature uniformity and stability to keep the samples in a safe environment
  • CFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation prevention
  • Sophisticated timer function with weekly/daily or real time mode
  • Intuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycle
  • Adjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)
  • Fan speed adapts automatically to achieve optimal temperature performance
...

 Refrigerated incubators IMP, with internal socket EU

Thermo

  • Outstanding temperature uniformity and stability to keep the samples in a safe environment
  • CFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation prevention
  • Sophisticated timer function with weekly/daily or real time mode
  • Intuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycle
  • Adjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)
  • Fan speed adapts automatically to achieve optimal temperature performance
...

 Refrigerated incubator RI-150/RI-250

Thermo

For incubation and test applications below ambient temperature as well as standard incubation applications at 37 °C in warm environments.

  • Available in 2 sizes as tabletop or standalone unit
  • Standalone unit has lockable casters for easy mobility
  • Door with viewing window
  • Microprocessor control for precise temperature adjustment
  • Timer function
  • Temperature alarm, overtemperature shutdown
  • Port hole on the right side of the device for inserting monitoring probes or cables
  • RS232 data interface for temperature monitoring (software not included in delivery)
  • IQ and OQ documentation and qualification service available
  • Automatic defrosting
  • Overheating protection in fan motor
...

 Shaking incubators SIC-200D-C

Kautex Textron

These incubators with integrated orbital shaker are ideal for cell culturing procedures, especially suspension culture applications. Compact units for bench-top use.

  • Microprocessor controlled
  • Forced air circulation for uniform chamber temperature
  • Digital display for temperature and speed
  • Timer from 1 second to 9 days
  • USB connection
  • Unique retractable platform for easy loading and unloading
  • With alarm function
...

 Cooling incubator INC 125 FC

IKA-Werke

Ideal for microbiological applications thanks to the wide temperature range and precise temperature control. Resource and environmentally friendly thanks to powerful compressor cooling technology.

  • Decontamination mode with 100 °C
  • Internal air circulation can be influenced by electronically adjustable fan speed
  • Use of the natural refrigerant R290
  • Excellent temperature management and optimised energy consumption thanks to very good insulation of the inner chamber
  • Additional inner glass door
  • Easy cleaning of the spacious interior thanks to rounded corners and smooth surfaces
  • Defrost function with continuous water drainage through drain opening
  • Door hinge on the right, can be changed on request
  • Optional lockable door
  • Installation and operation qualification (IQ/OQ) available on request
...

 Accessories for CO2 Incubators ICOmed

Memmert

  • Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continuously regulated
  • Two gas connections with quick release connectors for automatic switch-over of gas cylinders
...

 Environmental chambers, stainless steel, with humidity control

Thermo

The units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature and humidity control.

  • Stainless steel interior and shelves
  • Glass door
  • Directed horizontal airflow system
  • Adjustable defrost timer
  • Over- and under-temperature protection
  • Refrigerant R-513A
  • Access port Ø 54 mm
...

 Dynamic climate chambers MK

BINDER

Environmental chambers are ideal for material testing under dynamic conditions. The standard rapid alternation speeds of approx. 5 K/min enable standard-compliant testing.

  • Homogeneous climate conditions thanks to APT.line™ preheating chamber technology
  • Touchscreen controller with time-segment and real-time programming
  • Internal data logger, measured values can be read out via USB
  • Programmable condensation protection
  • Troubleshooting system with visual and acoustic alarms
  • CFC-free refrigerant R-452A
  • Heated viewing window with LED interior lighting
  • 1 stainless steel rack
...

 Constant climate chambers series KBF-S ECO Solid.Line

BINDER

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.

  • Homogeneous climate even with full load
  • Electronically controlled APT.line™ preheating chamber technology
  • Temperatures up to 28 °C below ambient temperature possible
  • Inner chamber made completely of stainless steel
  • 2 stainless steel grids incl. shelf support
  • Access port with silicone plug Ø 30 mm, left side
  • Unit self-test for comprehensive status analysis
  • LCD display for indication of temperature, humidity, alarms and additional information
  • Internal data logger with USB interface
  • Independent water supply via canisters
...

 Cooling incubators KB ECO

BINDER

Cooling incubator with environmentally friendly Peltier technology and APT.line™ preheating chamber technology for optimal incubation conditions. Ideal for applications in biotechnological, medical and pharmaceutical laboratories.

  • Condensate and dry-out protection for all operating conditions
  • Fail-safe operation due to intelligent thermoelectric temperature control
  • Programmable temperatures for intermitted incubation and refrigeration
  • APT.line™ preheating chamber technology
  • Adjustable condensate protection
  • Minimal energy consumption thanks to Peltier technology
  • Inner door made of safety glass
  • Inner chamber completely made of stainless steel
  • Insertion grids made of stainless steel
  • LCD display shows temperature, additional information and alarms
  • Internal data logger, measured values can be read out in open format via USB
  • Device self-test for status analysis
...

 Door lock for Cooling incubators KB ECO

BINDER

Lockable door handle for safe storage of samples in the cooling incubator....

 Feed-throughs for Cooling incubators KB ECO

BINDER

...

 Shelves for BINDER chambers and incubators, stainless steel

BINDER

Shelves made of stainless steel, perforated.

If you are ordering replacement shelves, please provide the serial number prior to ordering, since it might be necessary to order other shelves with different dimensions....

 Peltier-cooled incubator IPPeco

Memmert

Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.
Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.
The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient....

Add to shopping cart