CO2-Incubators

Comfort module:
two gas connections with quick release connectors, automatic switch-over gas cylinders (impossible in combination with O₂module)
Hygiene module:
electropolished interior, seamlessly welded by laser
Communication module:
USB interface, "Celsius" standard software for the control and logging of temperature, CO₂; O₂ (with O₂ module) and relative humidity; internal log memory 1024 kB as ring memory for all setpoint values, actual values, errors, settings with real time and date: logging approx. 3 months at 1 min. logging interval; parallel printer interface for all PCL3-compatible printers
CO₂ module:
extended CO₂ range from 0 to 20%
Premium module:
includes Comfort, Hygiene, Communication and CO₂module (impossible in combination with O₂ module)
O₂module:
control of oxygen concentration by N2 inlet, adjustment range 1% bis 20% O₂, setting accuracy 0,1%

Combination O₂ module with Comfort and Premium module impossible

Accessories Special equipment for Memmert Universal, Heating and Drying ovens

The Thermo Scientific Midi 40 CO₂ incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40 l) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO₂ incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.

• Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO₂ and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.
• Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.
• Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1 °C.
• Precise and reliable CO₂ control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.
• Removable water reservoir: generates relative humidity values up to 95 % with rapid recovery rates that promote optimal cell growth.
• Heated inner glass door: provides sample security while preventing unwanted condensation.
• Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.

Accessories Accessories for Midi 40 CO2Incubator

BBD 6220 provides stable growth conditions and a high degree of security and protection against contamination. Typical applications are for IVF or pathogenic work. Range: ambient + 5 °C to 50 °C, humidity greater than 95 % R.H. and CO₂ concentrations between 0 and 20 % Vol are reliably achieved via a microprocessor controlled measuring and control system. An automatic disinfection routine at 180 °C, which safely eliminates bacteria, fungi and spores, decontaminates the entire interior space including the sensors and fittings. The humidity water reservoir is located outside the chamber. The water is sterilised before it is used for humidification. The stainless steel chamber is crevice-free with rounded corners for easy cleaning. Includes "Heraeus CO₂ Autozero System" overtemperature protection with separate probe and RS232 interface.

External dimensions (W x D x H):	920 x 775 x 855mm
Internal dimensions (W x D x H):	607 x 585 x 669mm
Internal capacity:	220l
Power supply:	230V, 50/60Hz.

The CelCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature and CO₂
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
-ULPA filtration system with internal blower

• 90 °C moist heat decon system

The CelCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature and CO₂
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
-ULPA filtration system with internal blower

• 90 °C moist heat decon system

The CelCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature and CO₂
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
-90 °C moist heat decon system

The CO₂ incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO₂ control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO₂, O₂, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO₂ incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).

• fully insulated stainless steel door and heated inner glass door

Model variant TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

Specifications
Working temperature range:	at least 5 above ambient up to +50°C (standard sterilisation programme: 60 minutes at 180°C)
Setting temperature range:	+18 °C up to +50 °C
Setting accuracy temperature:	0,1°C
Humidity limitation thanks to a Peltier element:	when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/-2,5 %
Setting range active humidity control:	40 to 97 % rh and rh-Off
Setting accuracy humidity:	0,5 % rh
CO2-concentration:	0 to 20 %
O2-concentration:	1 to 20 %
Setting accuracy CO2:	0,1 %
Setting accuracy O2:	0,1 %
Power supply:	230 V, 50/60 Hz

Accessories Accessories for CO2 Incubators ICOmed Alternative

The Galaxy 48 R CO2 incubator is a medium-sized incubator with a capacity of 48 litres. It is specially designed for small laboratories and applications requiring a higher degree of isolation. The 48 R features a large backlit display with on-screen display of a help menu, control and data logging of temperature, CO2, door openings, alarms and optional O2 levels and humidity monitoring.

Features & Benefits:

• 48 litres (1.7 ft3) offer medium capacity in a small footprint
• options: High temperature decontamination (4 hours at 120 °C), O2 control (e.g. for hypoxic experiments), also available with split inner door
• Fanless design offers more usable space
• direct heating of all six walls ensures even and gentle
• Incubation conditions
• deep-drawn, easy-to-clean stainless steel chamber without seams or welds
• Low gas consumption due to the separately insulated inner door
• Integrated alarm relay

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

The base frame equipped with casters is used for the secure positioning and leveling of CO₂ incubators.

A CO2 incubator with a particularly uniform atmosphere, fast recovery and effective contamination protection. The C170 is easy to clean and simple to use and offers a high usable volume in relation to the footprint. The CellXpert C170 is the basic version of the C170i.

Features & Benefits:

• Verification of temperature homogeneity at 27 points (based on DIN-12880).

through four temperature sensors and four individually controlled heating circuits.

• CO2 recovery times < 5 min without exceeding setpoint due to microprocessor control
• Vibration and turbulence protection due to fanless design
• High-temperature decontamination at 140 °C
• Easy cleaning thanks to seamless deep-drawn chamber, quick removal
• Fanless construction
• No Hepa filters inside that could contaminate the chamber after HTD
• Up to 25% more usable space thanks to fanless design
• Accelerated workflow for handling and cleaning

The 170-litre class CO2 incubator that offers flexibility for the future, makes monitoring and documentation child's play and provides optimised growth conditions even for your sensitive cells. An incubator that also saves money and is produced to the highest quality standards. With VisioNize® touch interface for easy and full control of parameter settings, monitoring, documentation, user-defined tasks and alarms.

Features & benefits:

• On-site changeable position of the door handle

(left/right)

• O2-control can be retrofitted on site later
• Two housing bushings for incubator experiments with user-validated devices
• Homogeneous temperature distribution verified at 27 points (based

to DIN standard 12880) by four temperature sensors and four individually controlled heating circuits

• 5 min without exceeding the setpoint by microprocessor control
• High temperature decontamination with 180 °C
• Vibration and turbulence protection through fanless construction
• Definitely reduced gas consumption through intelligent gas control
• Accelerated workflow for handling,

Cleaning and documentation

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Humidification system with condensation protection

• Touchscreen controller
• Fail-safe CO₂ system for protecting the pH of cell cultures

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Divided inner doors for CO2 incubators CB / CBF Accessories Quick sample access for CO2 incubators CB / CBF Accessories Door hinge on the left for CO2 incubators CB series Accessories Access port with silicone plug for CO2 incubators CB series

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Humidification system with condensation protection

• PID controller with LCD display

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Copper interior for CO2 incubator CB-S 170 Accessories Door hinge on the left for CO2 incubators CB series Accessories Access port with silicone plug for CO2 incubators CB series

Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.

• Cleanroom class ISO 5 through HEPA filtration
• High-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfaces
• Integrated water reservoir with protective cover for max. relative humidity without condensate formation
• Easy filling and emptying of the water reservoir without removing shelves
• Bright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigation
• Programmable access code provides additional security
• Language selection facilitates operation: English, German, Spanish, French, Italian, Japanese, Mandarin
• Standard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves

-Stacking adapter and base with castors included


The specified values refer to one chamber.

Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.

• Cleanroom class ISO 5 through HEPA filtration
• High-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfaces
• Integrated water reservoir with protective cover for max. relative humidity without condensate formation
• Easy filling and emptying of the water reservoir without removing shelves
• Bright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigation
• Programmable access code provides additional security
• Language selection facilitates operation: English, German, Spanish, French, Italian, Japanese, Mandarin
• Standard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves

-Stacking adapter and base with castors included


The specified values refer to one chamber.

Accessories Options for CO2 incubator Heracell™ VIOS Accessories Accessories for CO2 inkubatoren Heracell™ VIOS

Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.

• Cleanroom class ISO 5 through HEPA filtration
• High-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfaces
• Integrated water reservoir with protective cover for max. relative humidity without condensate formation
• Easy filling and emptying of the water reservoir without removing shelves
• Bright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigation
• Programmable access code provides additional security
• Language selection facilitates operation: English, German, Spanish, French, Italian, Japanese, Mandarin
• Standard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves

Dimensions, external (W x D x H):	637 x 880 x 900 mm
Capacity:	165 l
Weight:	83 kg
Nominal consumption:	0.56 kW

Accessories Options for CO2 incubator Heracell™ VIOS Accessories Accessories for CO2 inkubatoren Heracell™ VIOS

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Humidification system with condensation protection

• Touchscreen controller
• Fail-safe CO₂ system for protecting the pH of cell cultures

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Divided inner doors for CO2 incubators CB / CBF Accessories Quick sample access for CO2 incubators CB / CBF Accessories Door hinge on the left for CO2 incubators CB series Accessories Alternative O2 control range for CO2 incubators CB / CBF Accessories Access port with silicone plug for CO2 incubators CB series

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Contamination-safe humidification system without water pan

• Touchscreen controller
• Fail-safe CO₂ system for protecting the pH of cell cultures

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Divided inner doors for CO2 incubators CB / CBF Accessories Quick sample access for CO2 incubators CB / CBF Accessories Door hinge on the left for CO2 incubators CB series Accessories Alternative O2 control range for CO2 incubators CB / CBF Accessories Access port with silicone plug for CO2 incubators CB series

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Contamination-safe humidification system without water pan

• Touchscreen controller
• Fail-safe CO₂ system for protecting the pH of cell cultures
• Inner door divided into 8 parts with cell therapy compartmentalization
• Stainless steel inner door with 8 separate glass doors
• 4 shelf levels with 8 inserts
• Individual inserts can be pulled out completely
• Each level is physically separated by an additional partition wall

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Divided inner doors for CO2 incubators CB / CBF Accessories Quick sample access for CO2 incubators CB / CBF Accessories Door hinge on the left for CO2 incubators CB series Accessories Alternative O2 control range for CO2 incubators CB / CBF Accessories Access port with silicone plug for CO2 incubators CB series

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O₂ control are available.

• Anti-contamination concept with 180 °C hot air sterilization
• CO₂ sensor with single-beam infrared technology
• Seamless inner chamber made of stainless steel
• Fanless interior with Venturi CO₂ gas mixing nozzle
• Internal data logger, measured values can be read out via USB
• Troubleshooting system with visual and acoustic alarms
• Interfaces: Ethernet, USB, zero-voltage alarm contact

-Contamination-safe humidification system without water pan

• Touchscreen controller
• Fail-safe CO₂ system for protecting the pH of cell cultures

Accessories Shelves for CO2 incubators CB Accessories Stacking adapters for CO2 incubators CB series Accessories Stacking frames for CO2 incubators CB series Accessories Base frames for CO2 incubators CB series Accessories Divided inner doors for CO2 incubators CB / CBF Accessories Quick sample access for CO2 incubators CB / CBF Accessories Door hinge on the left for CO2 incubators CB series Accessories Access port with silicone plug for CO2 incubators CB series

Protect valuable samples while optimizing cell growth. CO₂ incubators with stainless steel or copper chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.

Alternative CO2 Incubator Midi 40 with small volume

Made of stainless steel, perforated.