Micro Tubes

Filter

 Micro tubes, PP

LABSOLUTE®

The LABSOLUTE® micro tubes are made of high-quality PP and are resistant to mechanical and chemical stress. Simple and safe opening and closing of the vessel allow safe handling for greater comfort.

  • Free of DNase, RNase and pyrogens
  • Non-sterile
  • Guaranteed metal-free
  • Precise graduations lines on 1.5 and 2.0 ml reaction vessels
  • Puncturable cap
  • Matted cap with labelling field
  • Can be centrifuged up to 25000 x g (1.5 and 2.0 ml) and 20000 x g (0.5 ml)
  • Autoclavable at 121 °C
...

 Safe seal micro tubes, PP

LABSOLUTE®

The safe seal micro tubes from LABSOLUTE® have a special locking mechanism preventing unintentional opening of the lid during applications with thermal stress.

  • Frosted cover and labelling field
  • Graduation for easy volume determination
  • Non-sterile
  • Can be centrifuged up to 18000 x g (0.5 ml and 2.0 ml) and 30000 x g (1.5 ml)
  • Autoclavable
...

 Micro tubes 5 ml, PP

LABSOLUTE®

The LABSOLUTE® 5 ml micro tubes with attached snap-on cap are ideal for working with volumes up to 5 ml. For incubations above 80 °C, it is recommended to close the tube with the clip (7.696 749).

  • Low binding variant for maximum sample recovery
  • Amber vessels are ideal for lightsensitive materials
  • Free from DNase, RNase and pyrogens
  • Centrifugation up to 20000 x g
  • Cold-resistant up to -86 ° C
  • Autoclavable
...

 Micro tube with flip cap, PP

LABSOLUTE®

The 1.5 ml LABSOLUTE® micro tubes have a special flip cap that allows one-handed opening without touching the inside of the cap with your hand. This significantly reduces the contamination risk of the sample.

  • Non sterile
  • DNase, RNase and pyrogen-free
  • Autoclavable at 121°C
...

 LLG-Microcentrifuge tubes, PP

LLG

LLG-Microcentrifuge tubes are ideal for all test throughputs. These centrifuge tubes are very resistant to mechanical strain and highly resistant to temperature fluctuations and chemicals. The tubes have graduation marks for quick and easy volume checks. The ergonomic cap design with click-lock mechanism ensures a secure seal and makes opening and closing easier. With frosted labelling area on the housing....

 LLG-PCR-Tubes, 8 Strips with attached individual caps, PP

LLG

  • For 0.2 ml Thermocycler blocks
  • With domed or flat cap
  • Made of high quality polypropylene, RNase-, DNase- and Endotoxin-free
...

 LLG-Centrifuge tubes, 5 ml, PP, brown

LLG

The LLG-Centrifuge tubes, 5 ml, represent the perfect solution for all laboratory applications requiring incubation, centrifugation and sample handling in an intermediate volume range. For use with light sensitive samples.

  • Max. 25000 x g, suitable for high speed centrifugation
  • Graduations every 0.25 ml for easy volume estimation
  • A flat, frosted cap and large writing pad for sample labeling and identification
  • Autoclavable
  • Fits all rotors and racks that hold 15 ml conical tubes, no adapters needed
  • Certified free of RNase and DNase
...

 Reaction tubes, PP

ratiolab

  • Tight sealing cap
  • Safe and easy to be opened and closed
  • Autoclavable with opened cap
...

 Safe-lock reaction tubes, Biopur®, sterile

Eppendorf

Comply with the exacting requirements set by the medical, pharmaceutical and food industries, molecular biology and cell technology.

  • Sterile
  • Free from pyrogens, RNase, DNA and ATP
  • Independently checked and certified by an external laboratory.
  • Individually blister-packed
...

 Safe-lock reaction tubes, PP

Eppendorf

  • A small clasp on the patented cap locking device clips onto the rim of the tube
  • Autoclavable when open (121°C, 20min.)
  • Can be opened and closed easily with one hand
  • With frosted labelling area.
  • The clasp on the cap prevents the lid springing open accidentally (e.g. when heating)
  • Excellent mechanical stability for centrifugation
  • Graduated
  • Safe-lock reaction vessels are also available in Eppendorf Biopur® Quality
  • 0.5ml and 1.5ml capacity Safe-lock reaction vessels can be centrifuged up to 30 000 x g
...

 Microcentrifuge tubes, PP, with lid locking

BRAND

The microcentrifuge tubes are available with an additional lid locking to achieve especially effective sealing and prevent accidental opening.

  • Graduated
  • With attached lid
  • Autoclavable at 121 °C (2 bar), acc. to DIN EN 285
  • BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
...

 Micro test tubes, PP, strips of 8

BRAND

Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.

  • Autoclavable at 121 °C (2 bar), according to DIN EN 285
  • Suitable for storage up to -80 °C
  • BIO-CERT® CERTIFIED QUALITY
...

 DNA LoBind Tubes, with snap-on lid

Eppendorf

  • Less than 1% loss of DNA / RNA at low concentrations and critical conditions (high salt, short DNA-fragments)
  • No surface coating, e.g. silicone
  • Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
  • Novel PP, manufactured under optimized conditions
  • Highly transparent
...

 Protein LoBind Tubes, with snap-on lid

Eppendorf

  • Minimum protein loss (less than 3%, BSA 1µg/ml)
  • No surface coating, e.g. silicone
  • Free of DNA, DNase, RNase and PCR inhibitors (PCR clean)
  • Novel PP manufactured under optimized conditions
  • Highly transparent
...

 Eppendorf Tubes® 5.0 mL, PP, with hinged lid

Eppendorf

  • Simple, practical and ergonomic single-hand operation
  • Large labelling area
  • Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levels
  • Maximum safety and stability for centrifugation up to 25000 x g
  • Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used
...

 Eppendorf Tubes® 5.0 ml, PP

Eppendorf

  • Ergonomic operation: Simple, practical and ergonomic operation. Large labelling area.
  • Lid design: Screw cap for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 100 °C
  • Material: Exceptionally high-quality, transparent polypropylene, free of plasticizers, biocides or mold release agents, for reliable test results
  • Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean and sterile purity levels
  • Centrifugation safety: Maximum safety and stability for centrifugation up to 25 000 x g and fast and efficient protocols.
  • Conical shape: Compatible with accessories for conical 15 mL tubes - many existing adapters and racks can be used.
...

 Strips of 8 lids for micro test tubes, PE

BRAND

For 1.2 ml tubes. Caps are free from RNase, DNase and DNA....

 Reaction tubes, PP, with attached lid

BRAND

  • Graduated
  • With attached snap-on lid
  • Autoclavable at 121 °C (2 bar), acc. DIN EN 285
  • BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
...

 Standard reaction tubes, 3810 X, PP

Eppendorf

  • Flat, frosted cap and marking patch on the body of the tube provide generous space for labelling
  • Simplified opening and closing due to improved neck/cap geometry
  • Graduated from 0.1 to 1.5 ml on the tube body
  • Autoclavable when open (at 121 °C for 20 mins.)
  • Can be centrifuged up to 30000 x g in fixed angle rotors (up to 70000 x g in swing-out rotors)
  • Compatible with Micropestle
...

 Tamper-evident caps, PP, for micro tubes

BRAND

  • Tamper-evident screw caps with silicone seal
  • Operating range: -196 °C to 121 °C
  • BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
...

 96-tube racks, for use with robots

BRAND

Thanks to the stable connection between the mounting plate and the racks, the stackable SBS racks are especially well-suited for use with robots and other automated dispensing systems. Coded tubes (A1 - H12) and rack sides suitable for barcode labels simplify sample organization.

  • Tubes and rack are autoclavable at 121 °C (2 bar), acc. DIN EN 285
  • Tubes, racks, and lids can withstand temperatures as low as -80 °C
  • The seal of the tubes is pressure-tested
...

 Cap inserts, PP, for reaction tubes

BRAND

For caps without tamper-proof closure....

 Capping systems Matrix™ SepraSeal

Thermo

The Matrix™ SepraSeal sealing mats are suitable for securely sealing sample tubes with or without 2D code. For sample access, the caps can be removed with the practical cap removal tool (Cat.-No. 6.254 390, please order seperately) or pierced once. The pre-slit versions are suitable for multiple piercing. The self-sealing function of the pre-slitted elastomer maintains sample integrity....

 Eppendorf Tubes® 5.0 mL, starter pack, with snap caps

Eppendorf

  • Simple, practical and ergonomic single-hand operation
  • Large labelling area
  • Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levels
  • Maximum safety and stability for centrifugation up to 25000 x g
  • Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used
...

 Eppendorf Tubes® 5.0 mL, PP, with hinged lid, amber

Eppendorf

  • Simple, practical and ergonomic single-hand operation
  • Large labelling area
  • Certified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levels
  • Maximum safety and stability for centrifugation up to 25000 x g
  • Compatible with accessories for conical 15 ml tubes - many existing adapters and racks can be used
...

Add to shopping cart