Cylinders

Filter

 Measuring cylinders USP, borosilicate glass 3.3, tall form, class A, blue graduated

BRAND

DIN EN ISO 4788, DE-M marking. Calibrated to contain (IN). Ring marks at major graduations. Marks and inscriptions in high contrast blue enamel. With spout and hexagonal base. Incl. USP batch certificate. On request, also available with USP individual certificate....

 Standing cylinder, DURAN®, rim roughly ground

DWK

With base. Autoclavable....

 Glass cylinders with knob lid, DURAN®

DWK

With knob lid and polished rim....

 Standing cylinder, DURAN®, rim flanged and surface-ground

DWK

With base. Autoclavable....

 Measuring cylinders USP, borosilicate glass 3.3, tall form, class A, blue graduated

BRAND

DIN EN ISO 4788, DE-M marking. Calibrated to contain (IN). Ring marks at major graduations. Marks and inscriptions in high contrast blue enamel. With spout and hexagonal base. Incl. USP batch certificate. On request, also available with USP individual certificate....

 Volumetric flasks, boro 3.3, class A, amber, white graduation, with glass stopper

BRAND

All BLAUBRAND ® volumetric flasks are supplied with a batch number and an accompanying batch certificate in the original packaging. On request also available with individual certificate or DAkkS calibration certificate.

  • DIN EN ISO 1042
  • DE-M marking
  • Marks and inscriptions in high contrast white enamel
  • Calibrated to contain (IN)
...

 Bell jars, DURAN®

DWK

With ground joint neck, for vacuum use. Ground joint height: 50 mm....

 Cloning cylinder, PS, sterile

Bel-Art

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth....

 Measuring cylinders, PMP, tall form, class B, white graduations

Kartell

Clear. Conforms to ISO 6706 - 1981 (E).

  • Good chemical resistance
  • For liquids up to 170 °C
  • Pentagon base
  • Food-safe
  • Autoclavable
...

 Measuring cylinders DURAN®, tall form, class A, blue graduations

DWK

Calibrated to contain (IN). With spout, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer's website....

 Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations

BRAND

  • Silberbrand Eterna
  • DIN EN ISO 4788
  • With spout and hexagonal foot
  • Graduations and inscriptions in Eterna permanent amber stain
  • Calibrated to contain IN
...

 Measuring cylinder with plastic socket, DURAN®, class A, blue graduation

Hirschmann

With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788....

 Dewar flasks, cylindrical, with side grip

KGW-Isotherm

DURAN ®. DIN EN ISO 16496. With blue coated protective casing out of metal and side grip....

 Measuring cylinders DURAN®, tall form, class B, white graduations

DWK

  • Calibrated to contain IN
  • With spout and hexagonal base
  • Short line
  • DIN EN ISO 4788
...

 Mixing cylinders DURAN®, tall form, class A, blue graduations

DWK

Calibrated to contain (IN). With PE stopper, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer's website....

 Accessories for Motor-driven piston burettes

Metrohm

...

 Graduated cylinders, PMP, Class A, tall form

VITLAB

Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate....

 Measuring Cylinder, DURAN®, class A, Blue Graduation, USP

Hirschmann

According to USP error limits.

  • With dated batch identification
  • Main point ring graduation
  • Additional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com
...

 Hydrometer jars, glass

Geco

Hydrometer jars made of glass....

 Measuring Cylinder, DURAN®, class A, Blue Graduation

Hirschmann

Schellbach stripe for enhanced legibility and exact meniscus configuration, acc. to DIN EN ISO 4788. Calibrated for IN.

  • Certified conformity
  • With dated batch identification
  • Main point ring graduation
  • With spout
  • Hexagonal glass socket
  • Additional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
...

 Measuring Cylinder with Plastic Socket, DURAN®, class B, Blue Graduation

Hirschmann

With spout, removable plastic socket and protective ring, graduation marks, calibrated for IN, DIN EN ISO 4788....

 Measuring cylinders, borosilicate glass 3.3, tall form, class A, brown graduated

BRAND

All Blaubrand ® cylinders are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate, or DAkkS calibration certificate.

  • BLAUBRAND® ETERNA
  • DIN EN ISO 4788
  • DE-M marking
  • Graduations and inscriptions in ETERNA amber stain
  • Calibrated to contain (IN)
  • Ring marks at major graduations
  • With spout and hexagonal base
...

 Mixing cylinders, DURAN®, class A, blue graduated, with glass stopper

Hirschmann

With hexagonal foot. Blue graduated. Calibrated to contain (IN). DIN EN 4788. With standard ground joint and glass stopper. Certified conformity, with dated batch identification. Additional batch certificates can be generated and printed on the manufacturer's website....

 Nessler cylinders, Soda-lime glass

Marienfeld

With spout and white circular mark. Calibrated "In"....

 Museum jars, DURAN®

DWK

Cylindrical. With ground-in knob lid....

Add to shopping cart