Stands, Fittings

Made of stainless steel 304. For spherical ground joint connections. With set screw.

Made of stainless steel 304. For spherical ground joint connections. With set screw.

Made from natural agglomerated cork which can be easily cleaned. Non-allergenic, anti-fungal, anti-bacterial and antistatic material. Heat and erosion resistant and also reduces noise and vibration.

To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.

Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.

Prongs with cork.

Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.

To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.

Double bosshead malleable iron, epoxy coated. With M8 brass thumb bolt.

To DIN 12892. Steel, powder-coated, 8 mm thick. Rubber feet. With an M10 bore hole in the middle of one shorter side.

Graduations and meniscus line of the burette are clearly visible. They can be used on support rods of 10 - 12 mm diameter.

LABOMECA. With hexagon socket screw.

DIN 12895. With thumb screw M8/M10.

Graduations and meniscus line of the burette are clearly visible. They can be used on support rods of 10 - 12 mm diameter.

Manufactured from chrome plated cast steel with two prongs which are PVC coated for gentle hold of the objects. Two separately adjustable clamps enables perfect control of holding pressure and precise positioning of the objects. Clamps can be opened and closed smoothly with a grip width of 0-70 mm.
Available as 2 types:

• With solid stem of 12 mm rod diameter with the holding angle and distance from the support rod can be adjusted by a separate bosshead
• With swivel mechanism which enables the object freely swivel 360° and lockable at any desired angle. Complete with an integral bosshead usable for rods maximum diameter of 21 mm

Same rod can be placed either at the centre or at the rear of the base offering multi advantages. White base colour guarantees perfect visual observation of colour changes during titration applications.

• Rectangular base made of ABS.
• Delivered complete with a screw-in M10 support rod of 600 mm height

Malleable cast iron with chrome finish. DIN 12895. 90° and 180° angle with lug screw.

Standard to DIN 12894. With round jaws.

To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.

Chrome plated cast steel with two PVC coated prongs for gently holding the objects. Two separately adjustable clamps enable perfect control of holding pressure and precise positioning of the objects. With swivel mechanism which enables the object to freely swivel 360° and lockable at any angle. Complete with an integral bosshead, usable for rods maximum diameter of 21 mm.

Lacquered steel with green finish, M10 thread hole on one short side, 1 foot adjustable. To DIN 12892. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

18/10 stainless steel.

Chrome plated cast steel with two PVC coated prongs for gently holding the objects. Two separately adjustable clamps enable perfect control of holding pressure and precise positioning of the objects. With a solid stem of 12 mm rod diameter, the holding angle and distance from the support rod can be adjusted by a separate bosshead.

To DIN 12895. Material number 4301. Electrolytically polished, with heart screw.

Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".