Air sampling and analysis

Filter

 Dräger Sampling Tubes

Dräger Safety

Using the Dräger activated charcoal tubes or silica gel tubes, hazardous substances in the air are collected using a suitable medium via adsorption or chemisorption. The sample is then analysed in the laboratory by means of various analytical methods such as gas chromatography (GC), high performance liquid chromatography (HPLC), UV-VIS photometry, or IR spectroscopy....

 Dräger Aerotest Alpha

Dräger Safety

The Dräger Aerotest Alpha allows the quality of breathing air supplied by a compressor or compressed gas cylinder to be determined. Use of the test system performs a reliable check in accordance with the breathing air standard EN 12 021.

Dräger Aerotest Alpha
comprising of 1 pressure reducer, measuring device for 4 tubes, impactor adapter, coupling, barbed nipple, stopwatch, tube opener Dräger TO 7000, bubble test hose, pack of 5 sintered filters, instruction for use, transport case (black)...

 Air Flow Tester

Dräger Safety

In many fields, such as mining or industry, it is very important to detect even the smallest air flows, in order to quickly and reliably evaluate the possible diffusion of dangerous substances. With the air flow test tubes, the source, direction and speed of the air flow are visible immediately....

 Dräger-Tubes®

Dräger Safety

The Dräger-Tubes ® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes ® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro...

 Dräger-Tubes®

Dräger Safety

The Dräger-Tubes ® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes ® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro...

 Dräger-Tubes ®

Dräger Safety

The Dräger-Tubes ® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes ® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro...

 Gas Pump Accuro

Dräger Safety

Fast measurement with one hand: The Dräger-Tube pump accuro ® allows you to use the established Dräger-Tubes ® to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

Gas pump Dräger accuro...

 Air sampler, Airport MD8 airborne bacteria sampler

Sartorius

AirPort MD8 is a new portable air bacteria sampler for the pharmaceutical and food and beverage industries, hospitals, environmental protection and for industrial safety. AirPort MD8 has the following benefits:

  • Battery-powered and portable for lab or field use
  • Battery status display guarantees constant performance during sampling
  • Ergonomic, smooth design, surfaces can be disinfected
  • Choice of sampling selection, either by total volume or measurement duration
...

 Air sampler, MD8 airscan airborne bacteria sampler, accessories

Sartorius

...

 Gas analyzers MAT1100/MAT1200

Krüss

Gas analyzers MAT1000 series are used for measuring oxygen concentrations (O 2) or optional carbon dioxide concentrations (CO 2).
Applies to all models of MAT1000 series:

  • Easy and intuitive operation via touchscreen, even by untrained personnel
  • Create your own method
  • Available method parameters: scales, measurement procedures, limit values, comment and much more
  • Selectable measurement methods: single or continuous
  • Several single measurement procedures: manual, automatic, min/max detection
  • Shortcut keys for most important functions
  • Short measurement period, high accuracy even with small sample volume
  • Validation possible
  • Compliance with global standards such as GMP/GLP and 21 CFR Part 11
  • Documentation of all measured values of the last 999 measurements
  • Integrated interfaces, flexible data export (USB, Ethernet, RS-232)
  • Compact design in robust cast aluminum housing
  • Built-in air pressure sensor
  • Integrated flow rate monitoring
...

Add to shopping cart