KPG stirrer and bearings

Made of DURAN ^® tubing. For round bottom flasks 250 to 2000ml. Stirrer shaft, with PTFE stirrer blade and fixing screw. Seals vacuum stirring apparatus gas-tight to 10 ^-3 mbar up to a permanent load of 800rpm....

Made of DURAN ^® tubing. Other materials used: PTFE (bearing), silicone (gasket) and stirrer guides, GL male thread. Cone size 29/32. Guide bore 10mm i.d....

The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts....

Interchangeable. Bearing surface ground, polished.
With or without standard ground cone NS 29/32....

DURAN ^®. Interchangeable. Bearing surface ground and polished....

Made of DURAN ^® tubing. Stirrer bearings with NS cone and cooling water connections (thread GL14), bearing surface ground and polished....

Stirrer bearings for applications under vacuum or under slight overpressure. With extended guidance for reduced vibrations and a longer lifetime. Material: borosilicate glass 3.3 (closure), PTFE (sealings)...

High quality ferrules made of 15% Graphite / 85% Vespel ^®. Cat. No. 7.673 271 made of 100% Graphite....